Diamond Coating

1. Do not make contact with the orbiting cutter. Place a wooden pad or suitable cover over the table outward to protect it from probable damage. Use the buddy system when moving heavy connections. Do not effort to tighten arbour nuts using machine power. When removing or installing milling head cutters, continually hold them with a rag to avoid cutting your hands. While setting up work, mount the cutter last to evade being cut. Never alter the workpiece or work mounting devices when the machine is operative. Chips should be separated from the workpiece with a fit rake as well a brush. Keep in mind these key points: Never use a horizontal Diamond Coating or milling machine without an operative cutter guard. Always fix the work piece in a stable position on the table. If a vice is used it should be of vigorous construction and firmly attached to the table. Never remove security limit stops or use them as length trip stops. Always safeguard that cutters are rotating in the correct direction. Always stop the cutter rod when not really cutting. Always isolate the machine when changing a cutter use an arbor support when mandatory. Handle milling cutters carefully - they have sharp boundaries. Always replace the gear train cover on aallocating head after adjustment. Use knee braces when compulsory. Never use a milling machine cutter with even one scratched tooth.

2. NOTE Chip rake should be fictitious to the size of the T-slots. As the professional creator of complete sets of mining tackle, for example stone crusher, Henan Hongxing is permanently doing the best in products as well service. Shut the machine off earlier making any amendments or measurements. When using cutting oil, avert splashing by using suitable splash guards. Cutting oil on the floor can cause a slick condition that could result in worker injury. Milling is the procedure of machining flat, curved, and irregular façades by feeding the workpiece beside a rotating cutter comprising a number of cutting edges. The usual Mill includes typically of a motor driven spindle, which mounts and circles the milling cutter, and a reciprocating adjustable worktable, which mounts and feeds the workpiece. CONTACT US Industriegebiet Nord Hans-Geiger-Str. 11a D-67661 Kaiserslautern Deutschland Germany Office: +49 6301-32011-0 Website: http://diamond-toolingsystems.com/