1 / 22

BUS 430 Enthusiastic Study / snaptutorial.com

1. When Bill Gates stated that "Microsoft is always two years away from failure," he was emphasizing the importance of<br><br>2. Value chain measures would generally be less valuable to<br><br>3. In choosing performance measures, an organization might consider all of the following criteria except<br><br>4. The service-profit chain model<br>

GeorgeDixon75
Télécharger la présentation

BUS 430 Enthusiastic Study / snaptutorial.com

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. BUS 430 Enthusiastic Study--snaptutorial.com

  2. BUS 430 Enthusiastic Study--snaptutorial.com BUS 430 Chapter 3 quiz For more classes visit www.snaptutorial.com 1. When Bill Gates stated that "Microsoft is always two years away from failure," he was emphasizing the importance of 2. Value chain measures would generally be less valuable to 3. In choosing performance measures, an organization might consider all of the following criteria except 4. The service-profit chain model

  3. BUS 430 Enthusiastic Study--snaptutorial.com BUS 430 Chapter 5 quiz For more classes visit www.snaptutorial.com 1. Which of the following is not a major characteristic of a customer relationship management system (CRM)? 2. Regarding industrial robots, which choice is not correct? 3. During which stage of technology development and adoption is design and demand flexibility most critical? 4. Which of the following would not be included in a typical Customer Relationship Management System (CRM)?

  4. BUS 430 Enthusiastic Study--snaptutorial.com BUS 430 Quiz 1 set 1 For more classes visit www.snaptutorial.com Which one of the following has the highest goods content? Support processes would typically include all of the following except The quality revolution is most related to Which is generally related to service operations? The three issues that are at the core of operations management include all of the following except A support process could be any of the following except

  5. BUS 430 Enthusiastic Study--snaptutorial.com BUS 430 Quiz 1 For more classes visit www.snaptutorial.com • Question 1  Which of the following is not a current challenge to OM? • Question 2 Which one of the following has the lowest goods content? • Question 3 Which one of the following has the highest goods content?

  6. BUS 430 Enthusiastic Study--snaptutorial.com BUS 430 Quiz 2 For more classes visit www.snaptutorial.com 1. Of the seven categories of the Malcolm Baldrige National Quality Award criteria, which is least relevant to an operations manager?  2. Employee satisfaction and other workforce-related measures fall into which perspective in the Balanced Scorecard?  3. Interlinking is the quantitative modeling of cause-and-effect relationships between  4. Productivity is the  5. Customer satisfaction rating increases as time-on-hold waiting decreases is an example of

  7. BUS 430 Enthusiastic Study--snaptutorial.com BUS 430 Quiz 3 For more classes visit www.snaptutorial.com 1. Filing your individual federal tax returns would best be described as what type of value chain?  2. Information technology has significantly affected health care. Which of the following is not an outcome?  3. Computer integrated manufacturing systems result in all of the following EXCEPT:  4. Which of the following enables engineers to design, analyze, test, simulate, and “manufacture” products before they physically exist?  5. Infinite scalability is most related to

  8. BUS 430 Enthusiastic Study--snaptutorial.com BUS 430 Quiz 5 For more classes visit www.snaptutorial.com Question 1   The production of large goods such as airplanes is best accomplished using a ____ layout.  Question 2   All of the following are limitations to process layout except  Question 3   An assembly line with 28 operations is to be balanced. The total amount of time required for all 28 operations is 39 minutes. The longest operation takes 2.2 minutes and the shortest takes 0.8 minutes. The line will operate for 450 minutes per day.

  9. BUS 430 Enthusiastic Study--snaptutorial.com BUS 430 Quiz 6 For more classes visit www.snaptutorial.com Question 1   Safety capacity is intended for all of the following except Question 2   Which of the following is a short-term capacity decision? Question 3   According to the Theory of Constraints, ____ is the amount of money generated per time period through actual sales.

  10. BUS 430 Enthusiastic Study--snaptutorial.com BUS 430 Quiz 7 For more classes visit www.snaptutorial.com 1. Inventory that acts as a buffer between workstations in flow shops or departments in job shops is called ____ inventory.  2. Backorders ____.  3. Costs associated with backordering a product are called ____ costs.  4. Which is not an advantage of the periodic review system? 5.Using a fixed quantity system (FQS), as the reorder point increases

  11. BUS 430 Enthusiastic Study--snaptutorial.com BUS 430 Quiz 8 For more classes visit www.snaptutorial.com Question 1 Scheduling refers to specifying Question 2 The time needed to process a given set of jobs is called

  12. BUS 430 Enthusiastic Study--snaptutorial.com BUS 430 Quiz 9 For more classes visit www.snaptutorial.com 1. GE's Six Sigma problem solving approach employs five phases. Which is not one of the phases? 2. Which of the following is not a part of Philip Crosby's philosophy of quality? 3. Which of the following is not directly related to W. Edwards Deming? 4. Which does not fit with Six Sigma implementation?

  13. BUS 430 Enthusiastic Study--snaptutorial.com BUS 430 Quiz 10 For more classes visit www.snaptutorial.com 1. In a Kanban system, the numerator of the formula K = [d(p + w)(1 + α)]/C is analogous to 2. Quick setup or changeover of tooling and fixtures is associated with ____. 3. Ford Motor Company has decided to switch to a pull system of manufacturing and distribution for its vehicles. Which one of the following is most likely to occur? 4. A withdrawal Kanban

  14. BUS 430 Enthusiastic Study--snaptutorial.com BUS 430 Week 2 Case Study Waldo County For more classes visit www.snaptutorial.com Case Study: Waldo County. Please read the case study “Waldo County” at the end ofChapter 10 and questions 1 and 2 of that case listed below. Please show your calculations. 1. What is the project's NPV, given the projections in the Table 10.8? 2. Conduct a sensitivity analysis and a scenario analysis of the project. What do these analyses reveal about the project's risks and potential value?

  15. BUS 430 Enthusiastic Study--snaptutorial.com BUS 430 Week 3 Quiz 2 For more classes visit www.snaptutorial.com BUS 430 Week 3 Quiz 2 • Question 1   In regard to the value chain model, efficiency, cost and cycle time would be most related to • Question 2   Of the four models of organizational performance, which two focus on the "big picture" of organizational performance rather than on operational-level framework?

  16. BUS 430 Enthusiastic Study--snaptutorial.com BUS 430 Week 3 Quiz For more classes visit www.snaptutorial.com • Question 1  Which of the following would be an example of an innovation and learning performance measure? • Question 2 The triple bottom line (TBL or 3BL) refers to the measurement of sustainability in all of the following areas except

  17. BUS 430 Enthusiastic Study--snaptutorial.com BUS 430 Week 4 Assignment 1 LensCrafters Case Study For more classes visit www.snaptutorial.com Assignment 1: LensCrafters Case Study Due Week 4 and worth 250 points This assignment requires student complete an analysis of the LensCrafters case from Chapter 6 of the text.  Write a six to seven (6-7) page paper in which you:  Evaluate LensCrafters’ operations strategy and explain how the organization seeks to gain a competitive advantage in terms of sustainability.

  18. BUS 430 Enthusiastic Study--snaptutorial.com BUS 430 Week 5 Quiz 4 For more classes visit www.snaptutorial.com Question 1 In a design specification 25 ± 1.5, the value 25 is called the ____, while ± 1.5 is called the ____.  • Question 2 The final step in using the House of Quality involves identifying those technical features that meet any of the following criteria except

  19. BUS 430 Enthusiastic Study--snaptutorial.com BUS 430 Week 8 Assignment 2 Inventory Management For more classes visit www.snaptutorial.com Assignment 2: Inventory Management  Due Week 8 and worth 300 points  Research two (2) manufacturing or two (2) service companies that manage inventory and complete this assignment.  Write a six to eight (6-8) page paper in which you:  Determine the types of inventories these companies currently manage and describe their essential inventory characteristics. Analyze how each of their goods and service design concepts are integrated. Evaluate the role their inventory plays in the company’s performance, operational efficiency, and customer satisfaction.

  20. BUS 430 Enthusiastic Study--snaptutorial.com BUS 430 Week 9 Quiz 8 For more classes visit www.snaptutorial.com 1. Johnson’s sequencing rule is used to sequence 2. Which of the following is an example of a situation for which a Gantt chart would be appropriate? 3. Considering a two-resource sequencing problem, 4. The Shortest Processing Time (SPT) rule

  21. BUS 430 Enthusiastic Study--snaptutorial.com BUS 430 Week 10 Quiz 9 For more classes visit www.snaptutorial.com A tool to help determine how a process works and what it is supposed to do is a  2. Root cause analysis uses all of the following tools and methods except  3. Six Sigma efforts have use all of the following concepts and methods except  4. Which does not fit with Six Sigma implementation?  5. A tool to help focus on the most significant problems is

  22. BUS 430 Enthusiastic Study--snaptutorial.com

More Related