Carbide button, Tungsten carbide button, - itungstencarbide.com

1. Welcome to Zhuzhou Better Tungsten Carbide Co., LTD How do you remove tungsten carbide buttons?

2. Carbide buttons work at high machine temperatures generated through massive speeds that reduce the time machinery has been used. It has a refined finish with excellent size and style for better quality. The replacement of the button requires items like a torch, heating methods of about 1500F.Remove old buttonsYou heat the old carbide tooth with light and afterward, you flick or push the old tooth off. The old carbide tooth will ordinarily not tumble off all alone.

3. Prepare new buttons before you mountWhen you are supplanting carbide teeth, you should simply put the new tooth, braze compound side down, in a similar spot the old tooth was. The new braze composite will blend in with the old braze amalgam fine and dandy. If you are putting stump processor teeth on your stump processor unexpectedly then you need to ensure that your steel is liberated from scale or rust just as liberated from oils or oils. Simply cleaning the steel off could conceivably work. Utilizing a solid scathing more clean

4. The carbide button steel will extend around a few fold the amount of as the carbide so warming through the carbide levels this out. On the off chance that you get the steel above 1500° F, the steel will get fragile so you truly need to warm through the carbide. As you heat, three things will occur: 1. The water will bubble out of the brazing transition 2. Somewhat later the brazing transition will go to fluid and spread out3. At last the braze compound will dissolve This is the reason you need the pokey stick or document

5. Contact us Business name - Zhuzhou Better Tungsten Carbide Co., LTD Email - itungstencarbide1@gmail.com Phone: +86 13647338188Website- https://www.itungstencarbide.com/