Download
how to change the print cartridge on an mx300 n.
Skip this Video
Loading SlideShow in 5 Seconds..
How to Use Only the Black Ink Cartridge on a Canon Printer PowerPoint Presentation
Download Presentation
How to Use Only the Black Ink Cartridge on a Canon Printer

How to Use Only the Black Ink Cartridge on a Canon Printer

52 Vues Download Presentation
Télécharger la présentation

How to Use Only the Black Ink Cartridge on a Canon Printer

- - - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript

  1. How to Change the Print Cartridge on an MX300 Canon Printer The Canon Pixma MX300 is a multifunction printer. It enables to perform many tasks such black-and-white printing, scanning, copying and faxing. There are two ink cartridges for printing the document one is black ink cartridge and other one is color ink cartridge. You can replace the cartridges separately as they run out of ink. Further, the printer always displays a low ink alert when a cartridge is close to empty. At Canon printer support NZ, we have provided you some valuable instruction to change the Print Cartridge on an MX300 Canon Printer. Moreover, if you will failed to follow these steps properly then you can also get this assistance on call through Canon printer support number NZ. Step1-Turn the printer on and allow it to complete the self-test Step2-Lift the printer cover and prop it open with the support located on the right side of the printer cover. Lifting the cover will prompt the print cartridges to move to the center so you can access them Step3-Press down on the front edge of the cartridge you want to replace to disengage it from the holder. Lift the cartridge out Step4-Remove the new FINE cartridge from its package, taking care not to touch the metal contacts. Remove the strip of orange tape from the bottom of the cartridge. Step5-Place the cartridge in the holder, inserting the rear bottom edge first. Lift the front bottom edge of the cartridge to lock it into place in the holder. Step6-Lift the top cover to disengage the support. Fold it back into place and close the cover. The cartridges will automatically move to the ready position and perform a cleaning cycle. Once the cleaning is complete you can print. Original Source