1 / 16

Cisco 400-101 CCIE Routing and Switching Training Guide

The Cisco CCIE Routing and Switching 400-101 Certification Exam validate that professionals have the expertise to configure, validate, and troubleshoot complex enterprise network infrastructure.To Pass this certification Exam the best study mAterial is provided by passin1day. we have the Latest and most updated Study Guide for this exam.

Jhonson_Craig
Télécharger la présentation

Cisco 400-101 CCIE Routing and Switching Training Guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Pass CCIE Routing and Switching Exam Code: 400-101 By Using www.realbraindumps.com Study Material

  2. Why Choose Us? We Know There is a Question in Your Mind that why we choose www.realbraindumps.com to pass our Certifications Exam….??? Simple And Straight Answer of Your Question is shown in the Figure or Chart Shown Here: www.realbraindumps.com

  3. Your Success is Guaranteed With Us We assure you that if you use our dumps for the preparations of your Certifications Exams, then your success is guaranteed. Because the questions we provide are same like in the real exam. So just visit us at www.realbraindumps.com to pass any certification exam with ease. www.realbraindumps.com

  4. The List of Vendors : We Provide Study Material (Demos,Dumps,Questions & Answers etc) For all most All the Vendors that exists in Certification Fields. The List of Those Vendors is Displayed Here: www.realbraindumps.com

  5. Cisco 400-101 Sample Questions Question 1: If you change the Spanning Tree Protocol from pvst to rapid-pvst, what is the effect on the interface Fa0/1 port state? A. It transitions to the listening state, and then the forwarding state. B. It transitions to the learning state and then the forwarding state. C. It transitions to the blocking state, then the learning state, and then the forwarding state. D. It transitions to the blocking state and then the forwarding state. Answer: C Complete File is Here: http://www.realbraindumps.com/400-101-braindumps.html

  6. Cisco 400-101 Sample Questions Question 2: Which configuration is missing that would enable SSH access on a router that is running Cisco IOS XE Software? A. intGig0/0/0 management-interface B. class-map ssh-class match access-group protect-ssh policy-map control-plane-in class ssh-class police 80000 conform transmit exceed drop control-plane service-policy input control plane-in C. control-plane host management-interface GigabitEthernet0/0/0 allow ssh D. interface Gig0/0/0 ip access-group protect-sshin Answer: C Complete File is Here: http://www.realbraindumps.com/400-101-braindumps.html

  7. Cisco 400-101 Sample Questions Question 3: ICMP Echo requests from host A are not reaching the intended destination on host B.What is the problem? A. The ICMP payload is malformed. B. The ICMP Identifier (BE) is invalid. C. The negotiation of the connection failed. D. The packet is dropped at the next hop. E. The link is congested. Answer: D Complete File is Here: http://www.realbraindumps.com/400-101-braindumps.html

  8. Cisco 400-101 Sample Questions Question 4: Which statement is true? A. It is impossible for the destination interface to equal the source interface.. B. NAT on a stick is performed on interface Et0/0. C. There is a potential routing loop. D. This output represents a UDP flow or a TCP flow. Answer: C Complete File is Here: http://www.realbraindumps.com/400-101-braindumps.html

  9. Cisco 400-101 Sample Questions Question 5: Which action will solve the error state of this interface when connecting a host behind a Cisco IP phone? A. Configure dot1x-port control auto on this interface. B. Enable errdisable recovery for security violation errors. C. Enable port security on this interface. D. Configure multidomain authentication on this interface. Answer: D Complete File is Here: http://www.realbraindumps.com/400-101-braindumps.html

  10. Cisco 400-101 Sample Questions Question 6: While troubleshooting high CPU utilization on one of your Cisco Catalyst switches, you find that the issue is due to excessive flooding that is caused by STP. What can you do to prevent this issue from happening again? A. Disable STP completely on the switch. B. Change the STP version to RSTP. C. Configure PortFast on port-channel 1. D. Configure UplinkFast on the switch. E. Configure PortFast Answer: E Complete File is Here: http://www.realbraindumps.com/400-101-braindumps.html

  11. Cisco 400-101 Sample Questions Question 7: While troubleshooting high CPU utilization of a Cisco Catalyst 4500 Series Switch, you notice the error message that is shown in the exhibit in the log file.What can be the cause of this issue, and how can it be prevented? A. The hardware routing table is full. Redistribute from BGP into IGP. B. The software routing table is full. Redistribute from BGP into IGP. C. The hardware routing table is full.Reducethe number of routes in the routing table. D. The software routing table is full. Reduce the number of routes in the routing table. Answer: C Complete File is Here: http://www.realbraindumps.com/400-101-braindumps.html

  12. Cisco 400-101 Sample Questions Question 8: All switches have default bridge priorities, and originate BPDUs with MAC addresses as indicated. The numbers shown are STP link metrics.Which two ports are forwarding traffic after STP converges? (Choose two.) A. The port connecting switch SWD with switch SWE. B. The port connecting switch SWG with switch SWF. C. The port connecting switch SWC with switch SWE. D. The port connecting switch SWB with switch SWC. Answer: C,D Complete File is Here: http://www.realbraindumps.com/400-101-braindumps.html

  13. Cisco 400-101 Sample Questions Question 9: Which three statements about the output are true? (Choose three.) A. An mrouter port can be learned by receiving a PIM hello packet from a multicast router. B. This switch is configured as a multicast router. C. Gi2/0/1 is a trunk link that connects to a multicast router. D. An mrouter port is learned when a multicast data stream is received on that port from a multicast router. Answer: A,B,C, Complete File is Here: http://www.realbraindumps.com/400-101-braindumps.html

  14. Cisco 400-101 Sample Questions Question 10: Which technology does the use of bi-directional BPDUs on all ports in the topology support? A. RSTP. B. MST. C. Bridge Assurance. D. Loop Guard. E. Root Guard F. UDLD Answer: C Complete File is Here: http://www.realbraindumps.com/400-101-braindumps.html

  15. Our Customers Views Demonsstrate Our Performance Hi this is Findlay Ian. I was worried about my exam and I was thinking what should I do now. Then my best friend John I lhamrecommended me this website and he said I am sure you will pass your exam if you will follow their braindumps. My Name is Lara Dwayne I Used the Braindumps of www.realbraindumps.com They are providing 100% Correct Dumps. I passed My Exam with 950/1000 marks. Thank you realbraindumps.

  16. We Build Our Customer’s Trust www.realbraindumps.comThe Name of Trust

More Related