How to Fix “You Must Enable System Protection on This Drive” in Windows 10

1. PromptResolve promptresolve.com 11/4/2020 How to Fix “You Must Enable System Protection on This Drive” in Windows 10 – PromptResolve HowtoFix“YouMustEnableSystemProtectiononThisDrive”inWindows10 System restore is a Windows in-built utility tool for resolving most of the Windows issues. You can use this tool even if your Windows doesn’t bootup. However, sometimes you must have faced you must enable system protection on this drive issue, at the time of selecting a restore point. Try to identify the root cause of the issue along with proper troubleshooting methods to resolveit. Possiblecauses for “You Must Enable System ProtectiononThisDrive”ErroronWindows? This problem is mainly caused by the following two reasons in yoursystem: Firstly, the System Protection is in-activated on your system. In such a case, you needto  activate it manually. You might face more difficulty if you have accessed System Restore from the Advanced Startupoption. You may also face this issue if the System Protection service is not running on yoursystem,  and you must restart itproperly

2. 11/4/2020 How to Fix “You Must Enable System Protection on This Drive” in Windows 10 – PromptResolve It is generally recommended to check out both the causes and proper troubleshooting methodstofixthemandfindifanydeletefilesfromonedrivebutnotcomputer How do I fix Windows 10 system restore you must enablesystemprotectiononthisdriveissue? If you are facing this issue again and again in your computer, try the given-below solutions to resolve the issue at theearliest. Method1:EnablesystemprotectionUsingCommandPrompt You can use the Command prompt to bring back the system protection feature for the drive, which you want to restore. For this, apply the followingsteps: Type cmd in the search box of your desktop to open Command Prompt. Select Runas  administratoroption. You can also open the Command Prompt from Windows Recovery Environment. Forthis  open Windows Recovery Environment,go through Troubleshoot > Advanced options> CommandPrompt. Now, Type net start vss in the Command Prompt, andpress the Enter key. Then type the following command: exe /offline:C:windows=active, and press the Enterkey.  

3. 11/4/2020 How to Fix “You Must Enable System Protection on This Drive” in Windows 10 – PromptResolve At last, restart your desktop andlaptop.  Once the above steps are successfully completed, visit the System Restore settings to ensure whether you can enable System Protection for the drive in which you are facing issues. Method 2: Rename registryfiles Most of the users have claimed that renaming two registry files can also resolve this issue. For this, you can use Command Prompt and apply the followingsteps: Open Command Prompt in yoursystem. Enter cd %systemroot%system32config in the Prompt’s command screen, and pressthe   Enter key to opendirectory. Enter the following command: ren SYSTEM system.001, and press the Enterkey. 

4. 11/4/2020 How to Fix “You Must Enable System Protection on This Drive” in Windows 10 – PromptResolve Now, enter ren SOFTWARE software.001, and press the Enterkey.  The above commands will help you to navigate to the config folder inside System32 and to rename two systemfiles. Method3:CheckyourTurnonsystemprotectionsetting You might face problem while creating restore points if your system protection feature is disabled in Windows 10. You need to turn on System Protection setting to resolve you must enable system protection on this drive Windows 10error. Press the Windows + X key, and click on the Runoption. Type cpl in Run dialog box and press the Enter key to open the System Feature of yourPC.  

5. 11/4/2020 How to Fix “You Must Enable System Protection on This Drive” in Windows 10 – PromptResolve Now, navigate to the System Protection tab, and press the Configurebutton. Checks the Turn on system protection option, if it is not selected, then selectit.   Click on the Apply option, and tap the OK button to close thatWindow. 

6. 11/4/2020 How to Fix “You Must Enable System Protection on This Drive” in Windows 10 – PromptResolve Method4:StarttheSystemProtectionService If there is any issue in the System Protection Service of your system, you may receive such error messages. In such a case, before re-running System Restore, it is recommended to restart the System Protection Service to check if the issue has been resolved. You can start this service by following the steps givenbelow: Press the Windows + R key combination to open the Run utility. Type “services.msc” in the  search box and press Enter key to open the Servicestool. Once the Control Panel window opens, choose “Large Icons” from the “View by”option.  Locate and Click on the Administrative Tools entry. Now, click on the Services shortcut key from the bottom of yourscreen. Right-clickontheSystemProtectionServiceservicefromthatlist,selectPropertiesfromthe  contextmenu. Iftheserviceisinrunningstate,youshouldstopitbyclickingtheStopbuttoninthemiddle  of the window. Leave it in a stopped state until we proceed to nextstep.

7. 11/4/2020 How to Fix “You Must Enable System Protection on This Drive” in Windows 10 – PromptResolve Ensure that you have selected Automatic in the service’s properties window underthe  Startup type menu. Confirm all the dialogue boxes appearing at the time of changing the startup type. Don’t forget to click on the Start button before closing thatwindow. The above resolutions methods can fix the enable system protection issue, so that you can utilize System Restoreagain.