FRP Cooling Tower Manufacturer in Delhi

1. KoolDrop FRPCooling Tower Manufacturer www.kooldrop.com

2. Types Of Cooling Towers 01 FRP Cooling Towers Bottle Type 02 FRP Cooling Towers Square Type http://www.kooldrop.com

3. 01 01 FRP Cooling Towers Bottle Type Click on: http://www.kooldrop.com http://www.kooldrop.com/frp-round.html

4. FRP Cooling Towers Bottle Type Kool Drop manufactures frp round bottle shape cooling towers based on induced draft counter flow design using rotary water distribution system using aluminium/ ss / gun metal sprinkler. Bottle type Cooling tower design to withstand high wind velocity. Sudden shocks and vibration can absorb air from all direction. Airtech makes absolutely leak proof with honey well PVC fill-increases surface are, splits incoming air and water into several streams spreading equally across the tower cross-section. http://www.kooldrop.com

5. Fillings • The fillings are made of PVC. They have excellent heat exchange efficiency and remarkably good chemical resistance. These fills are totally enclosed in the tower, thus excluding them from sunlight and minimizing the growth of algae . • TECHNICAL DATA OF PVC FILLS • 1 Standard Type of PVC Fills : 600 mm X 300 mm X 150 mm • 2 PVC Honey Combs : 25 mm (12.5 + 12.5) • 3 Corrugation Pitch : 2.8 mm • 4 Corrugation Depth : 3 mm • 5 Spiral Angus : 21 • 6 No. of PVC sheets per 150 mm width : 12 • 7 Heat Transfer area / Cu Ft fill vol. : 1 Cu Ft. • 8 Thickness of finished fill : 0.25 mm http://www.kooldrop.com

6. 02 FRP Square Shape Cooling Towers Click on: http://www.kooldrop.com http://www.kooldrop.com/frp-square.html

7. http://www.kooldrop.com • FRP Square Shape Cooling Towers Kool Drop manufactures frp rectangular / square shape cooling towers based on induced draft counter flow and forced draft counter flow design using stationery type water distribution system which is designed to distribute hot water uniformly over fill area. We offer a wide range of FRP Cooling Towers that is made from quality tested raw materials. The Square Shape FRP Cooling Towers are designed especially for an alternative to round model for selection to our buyers. It is also equipped with a Hot dipped Galvanized hardware with rectangular casing body.

8. http://www.kooldrop.com Fillings The fillings are made of PVC. They have excellent heat exchange efficiency and remarkably good chemical resistance. These fills are totally enclosed in the tower, thus excluding them from sunlight and minimizing the growth of algae . A pre-eminent quality and long life fill consists of modular block of PVC honey combs construction to create prolonged contact time of hot air with water for maximum heat transfer. TECHNICAL DATA OF PVC FILLS 1 Standard Type of PVC Fills : 600 mm X 300 mm X 150 mm 2 PVC Honey Combs : 25 mm (12.5 + 12.5) 3 Corrugation Pitch : 2.8 mm 4 Corrugation Depth : 3 mm 5 Spiral Angus : 21 6 No. of PVC sheets per 150 mm width : 12 7 Heat Transfer area / Cu Ft fill vol. : 1 Cu Ft. 8 Thickness of finished fill : 0.25 mm

9. www.kooldrop.com

10. FAN http://www.kooldrop.com An aerodynamically designed axial flow type fan is specifically designed for cooling tower use. A well balanced fan delivers large air volume at high efficiency and low noise level. The fan blades and hub are of cast aluminium alloy (LM-6).

11. Thankyou For any Information and buy FRPCooling Tower Manufacturer Visit on www.kooldrop.com

12. Kool Drop Cooling Towers Pvt Ltd www.kooldrop.com Facebook：https://goo.gl/QcRm1K Twitter：https://goo.gl/1eZwHx Linkedin：https://goo.gl/sWcsMT Google+：https://goo.gl/Hiaqwe About Kooldrop: https://goo.gl/RdrP4n Wooden Kooling Tower: https://goo.gl/hNkMGv FRB Round Shape Coolong Tower : https://goo.gl/U4QWG9