How To Check The Oil Level From Dipstick

1. HOW TO CHECK THE OIL LEVEL FROM DIPSTICK HOW TO CHECK THE OIL LEVEL FROM DIPSTICK STEP 1—PREPARE TO CHECK Your vehicle should be on level ground with the engine off and the transmission in park. Lift the hood, most vehicles have a hood-release lever under the steering wheel. It will be on the left side. STEP 2—LOCATE THE DIPSTICK The dipstick is a simple measuring device. Checking oil levels on dipstick is the best way to determine how much oil is in your engine. In most vehicles, the dipstick is marked by a yellow or orange colored ring. The words CHECK OIL may also be printed on top of the ring. STEP 3—PULL THE DIPSTICK You will need to pull the dipstick out of its housing tube. Once you have unsheathed the dipstick, you will see two lines: the lower line indicates that the oil is one quart low; the upper line indicates that the car’s oil tank is full. You may also see the words “add” or “full” printed. STEP 4—REINSERT DIPSTICK You will need to insert the dipstick into the tube slowly. Be sure to push it all the way down. Then withdraw it & look at the tip. If there is oil between the two lines, then your engine has enough of it. If the oil level is at or below these lines, you will need to add a quart of oil. STEP 5—IF YOU NEED TO ADD OIL If you need to add a quart of oil, you should wait several minutes for it to drain down the car oil tank. Then check the oil level again according to the steps above. The level should be between the high and low marks. www.shieldoils.com