1 / 8

DES-1721 SC Series Exam Dumps

Passcert provides valid DES-1721 SC Series Exam Dumps to help you pass your exam easily, all DES-1721 Q&As are collected from real test which can ensure your success in the first time.

Télécharger la présentation

DES-1721 SC Series Exam Dumps

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. https://www.passcert.com/DES-1721.html Pass Pass EMC EMC DES DES- -1721 1721 Exam With Exam With Valid Valid Dumps Dumps EMC EMC DES DES- -1721 1721 Exam Exam Specialist – Implementation Engineer, SC Series Exam https://www.passcert.com/DES-1721.html Save 20% OFF, Including EMC DES-1721 Exam Dumps P Pass ass DES DES- -1721 1721 Exam with Exam with Passcert Passcert EMC EMC DES DES- -1721 1721 dumps dumps in in the first attempt. the first attempt. https://www.passcert.com/ 100% pass

  2. https://www.passcert.com/DES-1721.html QUESTION NO: 1 You are installing a new SC9000. Which procedure should be used to install and configure the system? A. Connect through the iDRAC port B. Connect through a null modem cable to the serial port C. Connect through the Dell Storage Manager Client D. Connect through the supplied proprietary serial cable to the serial port Answer: D QUESTION NO: 2 Based on SAS back-end cabling best practices, which configuration represents how an SC4020 storage array with one SC220 expansion enclosure is cabled? 100% pass

  3. https://www.passcert.com/DES-1721.html 100% pass

  4. https://www.passcert.com/DES-1721.html A. Configuration A B. Configuration B C. Configuration C D. Configuration D Answer: A QUESTION NO: 3 An administrator wants to configure an SC Series array to use Virtual Port Mode. What is a requirement to accomplish this task? A. NPIV must be disabled on Fibre Channel switches B. I/O Controller cards must use a single-ID firmware version C. Fibre Channel switches must use a switched fabric topology D. Activation license must be purchased and installed Answer: D 100% pass

  5. https://www.passcert.com/DES-1721.html QUESTION NO: 4 What are the possible methods to upgrade the firmware on a Brocade switch? A. FTP, SFTP, and Web Tools B. USB, FTP, and SFTP C. USB, FTP, and Web Tools D. USB, SFTP, and Web Tools Answer: C QUESTION NO: 5 A customer is running the Dell Storage Manager (DSM) Suite as a software stack on Microsoft Windows. To reduce the Microsoft licensing costs, the customer wants to switch to the DSM Virtual Appliance. Which recommended deployment should the customer use? A. Configure as a Primary Data Collector B. Configure as a Remote Data Collector C. Migrate the DSM database manually D. Migrate from the existing Data Collector Answer: D QUESTION NO: 6 Which operating system runs the Dell Storage Manager (DSM) as a virtual appliance? A. CentOS 7 B. Windows Server 2012 R2 C. VMware D. Windows Server 2010 R2 Answer: C References: 100% pass

  6. https://www.passcert.com/DES-1721.html QUESTION NO: 7 Which best practices should be followed when using iSCSI to connect SC Series arrays and hosts for switches that incorrectly negotiate speed and duplex? A. Use a separate supernet or switches for iSCSI trafficGigabit full duplex hard set for all iSCSI portsEnsure switches used for iSCSI are of a blocking design B. Use a separate VLAN or switches for iSCSI trafficAuto-negotiate for all switchesEnsure switches used for iSCSI are of a non-blocking design C. Use a separate VLAN or switches for iSCSI trafficGigabit full duplex hard set for all iSCSI portsEnsure switches used for iSCSI are of a non-blocking design D. Use a separate subnet or switches for iSCSI trafficAuto-negotiate for all switchesEnsure switches used for iSCSI are of a blocking design Answer: C References: QUESTION NO: 8 DRAG DROP What is the correct system hierarchy of SC Series array storage virtualization? Answer: <map><m x1="15" x2="271" y1="11" y2="57" ss="0" a="0" /><m x1="15" x2="269" y1="60" y2="108" ss="0" a="0" /><m x1="16" x2="269" y1="111" y2="157" ss="0" a="0" /><m x1="15" x2="271" y1="159" y2="207" ss="0" a="0" /><m x1="14" x2="271" y1="211" y2="260" ss="0" a="0" /><m x1="281" x2="534" y1="13" y2="57" ss="1" a="0" /><m x1="281" x2="534" y1="60" y2="108" ss="1" a="0" /><m x1="280" x2="536" y1="111" y2="157" ss="1" a="0" /><m x1="279" 100% pass

  7. https://www.passcert.com/DES-1721.html x2="536" y1="160" y2="207" ss="1" a="0" /><m x1="279" x2="536" y1="211" y2="260" ss="1" a="0" /><c start="4" stop="0" /><c start="3" stop="1" /><c start="2" stop="2" /><c start="1" stop="3" /><c start="0" stop="4" /></map> QUESTION NO: 9 Assume a storage administrator is using the recommended storage profile. What describes the distribution of volume data residing in an SC series storage array that has 15K and 7K as the back-end? A. New and frequently accessed replay data in Tier 1 RAID 5Aged replay data and inaccessible data in Tier 3 RAID 6 B. New data in Tier 1 RAID 10Frequently accessed replay data in Tier 1 RAID 5Aged replay data and inaccessible data in Tier 3 RAID 6 C. New data in Tier 1 RAID 10Frequently accessed replay data in Tier 2 RAID 5Aged replay data and inaccessible data in Tier 3 RAID 6 D. New and frequently accessed replay data in Tier 1 RAID 10Aged replay data and inaccessible data in Tier 3 RAID 6 Answer: D QUESTION NO: 10 A customer is facing poor performance on all synchronously replicated volumes every Thursday between 4 PM and 6 PM. All departments have checked their applications for any batch jobs; however, nothing was found. The I/O graphs do not show any anomaly and the replication links are not saturated. What is the possible reason for this behavior? A. Switches used for replication are restarting B. QoS Bandwidth Limit is enabled in the QoS node C. Data Progression is consuming all disk performance D. Automatic report creation is impacting replication Answer: B 100% pass

  8. https://www.passcert.com/DES-1721.html CCNP 300-101,300-115,300-135 CompTIA A+ 220-1001,220-1002 Storage C1000-016, C1000-020, C1000-021, C1000-022 Azure Architect AZ-300, AZ-301 Coating Inspector NACE-CIP1-001, NACE-CIP2-001 HCIP-R&S H12-322-ENU, H12-322-ENU, H12-322-ENU HCIP-Storage H13-621-ENU, H13-622-ENU, H13-623-ENU 365 Certified: Enterprise Administrator Expert MS-100, MS-101 365 Certified: Teamwork Administrator Associate H12-322, H12-322 365 Certified: Modern Desktop Administrator Associate H12-322, H12-322 NSE 5 Network Security Analyst NSE5_FMG-6.0, NSE5_FAZ-6.0 Certified: Azure Data Engineer Associate H12-322, H12-322 MCSA: Windows Server 2016 H12-322,70-741,70-742 CCNA Data Center 200-150,200-155 CCNA Cyber Ops 210-250,210-255 HCIP-Security H12-721-ENU, H12-722-ENU, H12-723-ENU HCIP-Cloud Computing H13-522-ENU, H13-523-ENU, H13-524-ENU CCNP Data Center 300-160,300-165,300-170,300-175 CCNA 200-105,100-105 CCNP Security 300-206,300-208,300-209,300-210 CCNA Collaboration 210-060,210-065 TOGAF 9 Certified OG0-091, OG0-092 CompTIA A+ New 220-901,220-902 LX0-103, LX0-104 EMCC-1 101-400,102-400 EMCC-2 201-450,202-450 HCIP-WLAN H12-321-ENU, H12-322-ENU 100% pass

More Related