40 likes | 52 Vues
In molded products made of rubber, the 3 types of rubber gaskets are chloroprene gaskets, silicone gaskets and EPDM gaskets.
E N D
Several industries use gaskets for various purposes. Out of all the gaskets used, rubber gaskets are the most popular ones. A rubber gasket is basically used to seal a tiny gap between two joints or mating surfaces. You will find rubber gaskets and seals being used all around and they are so common that at times you would not have even noticed them. As the list of their uses is extremely long, we can cut the long story short by looking at the 3 main types of rubber gaskets, Chloroprene gasket: This rubber gasket is made from the first known synthetic rubber called chloroprene. As it can handle harsh conditions, it has a lot of uses. It is resistant to oil and petroleum products. Chloroprene gaskets are costlier than natural rubber and don’t do their job well at low temperatures. Silicone gasket : Silicone gaskets are well suited for both high and low temperatures due to the unique properties of silicone.
As its flexibility is unbeatable even at extremely low temperatures, silicone is used in gaskets meant for colder regions like the Arctic. The only drawback is that these gaskets are costlier than most others. EPDM gasket: EPDM rubber is quite popular due to its ability to withstand harsh weather conditions, insulation and mechanical properties at extreme temperatures. It is even resistant to acids, alcohol and other solvents. If you ever want to get molded products like gaskets and seals or products with rubber to metal bonding for your industry, choose a good manufacturer. In molded products made of rubber, the 3 types of rubber gaskets are chloroprene gaskets, silicone gaskets and EPDM gaskets.
Thank you: Address: 3505 Hart Ave, Ste. 207 Rosemead, CA 91770 Address: 404 N Halstead St, Ste. 150Pasadena, CA 91107 Phone: (626)351-1111 Fax: (626)351-1130 E-mail: info@lusidarubber.com Website: http://lusidarubber.com/