Polyfilms and Laminates Testing Instruments

1. Pacorr Testing Instruments Pvt. Ltd Polyfilms & Laminates Testing Instruments

2. PEEL BOND/ SEAL/ TENSILE STRENGTH TESTER- DIGITAL Pacorr Seal Strength/ Peel adhesion/ Bond strength tester often play a major role in determining the Seal/Peel adhesion strength of Plastic films, Laminates etc. It is, therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly. This instrument provides a relatively inexpensive way for determining the Peel/Seal/tensile strength and elongation of a variety of plastics/Poly films & Laminates. They are based on constant rate of traverse principle, in which one end of the test specimen is held in a stationery grip while the other end is moved at a known fixed speed with the help of a motor, gearbox, and screw arrangement. TECHNICAL DATA Model: PCTTM-1 No. of screws: Single screw mechanism driven through motor & gearbox Vertical Clearance: 400 mm Exterior Body Paint: Powder coated Display: Digital LCD Display Capacity Range: 20 Kgf/ 50 Kgf Load cell: ‘S Type’ load-cell of reputed make Least count for load: 2/5 Grams Results displayed on screen: Load & Elongation values Least count for elongation: 0.1 mm Speed Range: 40mm/min - 400 mm/min Load units: Kg Speed control: Dedicated AC Drive Motor for speed variations: Reputed make induction motor with dedicated gear box Test jaws: Vice Type (By Default) else Please specify your applications at the time of order. Power Supply: 230 Volt, 50 Hz, Single Phase, AC Supply Salient Features: • Table Top model • Aesthetic outer appearance • Unique and compact design features • Fitted with Microprocessor based PROGRAMMABLE Logical controller • Computer interface through RS232 Communication. (Optional) • Equipped with Lead screw for friction less traverse • High accuracy in elongation (0.1mm) • Reputed make Induction motor with Dedicated Gear Box and Drive for speed variation and to maintain speed at high • Easy to use display unit (controller part) and software • In-built Over Load Safety • In-built Over Travel Safety • You can get graph for load v/s elongation (stress v/s strain) and also get a excel sheet (Optional) • • • • • • • • • • • • • • • •

3. LABORATORY HEAT SEALER Pacorr Laboratory Heat Sealer is mainly used in packaging industry and is used for sealing of packaging materials like plastic bags, plastic films etc. The material is sealed using the heat sealer and then the sealing is tested through different tests to ensure the best sealing strength and integrity of the packaging materials. TECHNICAL DATA         Model: PCLHS-1 Sealing Temperature Range: Ambient to 300˚C. Temperature Controller: PID Instrument Temperature range: 0 –400˚C L.C. 0.1˚C and Accuracy of 0.2˚C. Dwell Time: 0.1 to 999.9 seconds. Pressure: 0.05 to 0.7 MPa. Operated by switch OR Footswitch. Seal surface: 150mm x 15mm &300 mm X 15 mm (Straight Line) Air Input: 0.7 MPa Table top Model Power: 230 V AC, 50 Hz    Features:           Seal Pattern: Straight line Microprocessor based display for accurate test results Highly accurate test results under pneumatic pressure control. Single Pushbutton operation after setting PID temperature and time Strong heating jaws for performing tests Bright LED display for temperature and timer PID temperature controller for highest level of controls and repeatability Digital Preset timer Guide rod mechanism for efficient control of sealing Standards: ASTM F 2029

4. DART IMPACT TESTER- DLX Pacorr Dart impact tester is a testing instrument for the plastic and film industries that is used to determine the strength of a plastic film when subjected under a sheer force that applied through a freely falling dart. The dart is hemispherical in shape and it is dropped from a specific height on a plastic film that is placed at the bottom of the instrument with some tension. This instrument is used for plastic films consists of a vacuum clamp of specified shape and size on which the specimen can be supported at its periphery in a horizontal plane, a dart with incremental weights, a vacuum pump with electric motor to provide the vacuum needed for holding the test specimen, and a clamping ring for holding thicker films during the test. The dart used for striking the film under test has a hemispherical head of 38.1 mm diameter made of fiber reinforced Bakelite and an aluminium shaft with mild steel tip for suspending it from an electromagnet. A set of annular shaped stainless steel weights is provided for changing the total mass of the dart for giving different impact energies. A foam padding is placed inside the clamp to avoid damage to the dart head if it passes through the test specimen. TECHNICAL DATA  Model: PCDIT-1  Reference Standard: Machine is Designed According to ASTM D- 1709 OR IS 2508.  Specimen Clamping: Pneumatically Operated Clamps have been used to hold Film.  Release Mechanism: Electromagnetic Supporting of 2 Kg Weight with a Centering device to Ensure reproducible drop.  Drop Mechanism: Dart drop mechanism is provide to dart drop at different Drop height.  Counter: Six digit electronic counters would be provided for counting number of trials.  Dart Shaft: OD 6.5 mm and 127.5 mm long.  Dart & Weight: As per Standard Test Method A & B (As per IS 2508) As per Standard Test Method A & B darts with Hemispherical Heads Method – A: 38.10 mm (± 0.13 Method – B: 50.80 mm (± 0.13 mm) SS Material: 01 Nos. mm) SS Material: 01 Nos. Aluminum: 01 Nos. Aluminum: 01 Nos. Phenolic: 01 Nos. Phenolic: 01 Nos. Common Weights for Method A & B (As per IS 2508) Sr. No. Weight Qty. Material 01. 1 Gram 4 Nos. Aluminum

5. 02. 2 Gram 4 Nos. Aluminum 03. 5 Gram 4 Nos. Aluminum 04. 10 Gram 4 Nos. Aluminum 05. 15 Gram 2 Nos. Aluminum 06. 15 Gram 2 Nos. Stainless Steel 07. 30 Gram 2 Nos. Stainless Steel 08. 45 Gram 2 Nos. Stainless Steel 09. 50 Gram 1 Nos. Stainless Steel 10. 60 Gram 3 Nos. Stainless Steel 11. 90 Gram 1 Nos. Stainless Steel 12. 100 Gram 120 Gram 180 Gram 200 Gram 1 Nos. Stainless Steel 13. 1 Nos. Stainless Steel 14. 1 Nos. Stainless Steel 15. 1 Nos. Stainless Steel  Acrylic Safety cover is additionally fitted on Clamping device to protect and avoid Damages of dart while drop. Covered Boxes are also provided in the machine to protect Weight Again Looses 

6. COEFFICIENT OF FRICTION TESTER- COMPUTERIZED (STATIC & KINETIC) The coefficient of friction is the ratio of the frictional force and normal pressure acting on two surfaces in contact with each other. Thus coefficient of friction is an inverse measure of the relative ease with which a material will slide over a similar or different material. Pacorr Coefficient of Friction Tester for plastic films is designed to find static and dynamic coefficients of friction between two flat surfaces of flexible plastic films. It consists of a rigid and smooth horizontal glass platform and an arrangement to measure frictional force between the test specimens mounted on it and a movable sled. The horizontal platform is fixed on the base plate and the specimen is held over its surface with the help of pressure sensitive adhesive tapes. The other portion of the specimen is held on a metal sled having its bottom face lined with rubber foam. The sled is kept over the specimen held on the platform and is made to move over the platform at the specified speech with the help of a screw mechanism. It is also connected to a load cell for measurement of frictional force acting on it. A digital display with peak force indicating arrangement enables measurement of both the instantaneous force and maximum force exerted during the slipping operation. Micro switches are provided to automatically stop the motion at the extreme ends of the travel of the sled. TECHNICAL DATA  Load cell Capacity: 1 Kgf. (or as per requirement)  Display: Microprocessor based Load controllers with memory of Peak Load.  Speed Indication: In LCD display  Resolution: 1gm with accuracy of +/- 1 gm.  Motor with fix speed as per standard.  Computer Interface: Through RS 232 Versatile Window based software for COF test.  Calculation and results for Static and Dynamic COF. Graphical results for COF  S.S. moving platform with guider and scale.  Size of Sled: 63.5 mm X 63.5 mm X 6 mm.  Weight of Sled: 200 Gm.  Self-calibration of load and travel to microcontroller.  Sturdy structure with accuracy of 1 degree.  Policed SS platform with glass plate with Sample holding clamps to perform test.  Table Top Model  Paint: Powder Coated  Power: 220 V, 50 Hz.

7. SCUFF RESISTANCE TESTER- DIGITAL Pacorr scuff resistance tester is the instrument that is used in industries that deal in manufacturing of packaging materials, paints and coatings. The scuff resistance tester helps in determining the amount of scuffing force that a material can bear without facing any deterioration in the surface or its paint quality. The manufacturers of such materials need to understand the importance of the scuff resistance hence need to test their products so that they could rest assured that the customers are delivered with nothing but the best quality products. TECHNICAL DATA               Model: PCSRT-1 Specimen Size: 48mm & 120mm Weight on Sample: 1psi + 1psi separate weights provided Controls:Digital Preset Cycle counter. No. of Cycles:0 – 9999. Counter 4- digit Digital Preset type Least Count of Counter: 1 Rotational Speed 60 rpm Lower Motor capacity ¼ HP Display: Digital (LCD) Safety Lock: Yes (with upper clamp) Sample Preparation templates: 3 Paint: Powder coated & Chrome finished Input Power:220 Volts, 50Hz, single phase supply. Features: Motorized Weight arrangement on plunger for noise free working Highly accurate test results under uniform load and specified diameter. Uniform load by weights on test sample for evenness in testing Provision of Set number of counts through Digital Preset Counter Firm hold of test specimen by circular clips/clamps Motorized Geared system for scuff movement Digital Pre-settable counters up to 9999 counts Highly accurate and precise results under uniform load and rubbing clamp movement Accurate rpm of rotating discs using synchronous motor User-friendly electronic controls and ergonomically designed feature           Application: To measure rub-proofs of printed paper, carton package & board. The resistance of inks on printed films and leather materials. Handling of glossy magazine and papers.   

8.    Synthetic carrier/ mover Paperboard Corrugated boxes. Standard: BS 3110, ASTM F2497-05. SPECIFIC GRAVITY BALANCE Specific gravity balance is useful for checking the specific gravity of various type of solid and liquid materials. Instrument is provided with density determination kit. The Specific gravity of any elastomer is of considerable importance for its identification and can also be used for providing a rough assessment of its physical properties. Specific gravity balance is highly beneficial in evaluating rubber and various rubber products. It is widely used in the rubber industry. Specific gravity balance can also be used for finding if the sample and the products are prepared from the same compound or not. TECHNICAL DATA: 1.Model: PC-SAB-224CL with Density determination kit         Capacity: 220gm Resolution: 0.0001gm (0.1mg) Pan Size: 90mm Diameter Calibration: External Single touch key external calibration ensures the highest accuracy. 18 Standard Units with all character marks Standard 1500V isolation USB port, ease to connect with PC. Backlit High Contrast display with 15mm digits. 2.Model: PC-SAB-224CL-INCAL with Density determination Kit        Capacity: 220gm Resolution: 0.0001gm (0.1mg) Pan Size: 90mm Diameter Calibration: Internal 18 Standard Units with all character marks Standard 1500V isolation USB port, ease to connect with PC. Backlit High Contrast display with 15mm digits. 3.Model: PC-SAB-223CL with Density determination kit       Capacity: 220gm Resolution: 0.001gm (1mg) Pan Size: 110mm Calibration: External Single touch key external calibration ensures the highest accuracy. 18 Standard Units with all character marks

9.   Standard 1500V isolation USB port, ease to connect with PC. Backlit High Contrast display with 15mm digits. COLOUR MATCHING CABINET Pacorr Colour matching cabinet is a very extensively used testing instrument to match the colours of different products under different lighting conditions. This instrument is used in many different industries such as textile industries, food industries, paint industries etc. The instrument is a closed cabinet with different light sources installed in it. The specimen is placed under different lights at an angle of 450 along with the reference standard. TECHNICAL DATA   Model: PCCMC-1 The equipment is fitted with FIVE Light Sources as per CIE International Standards: D – 65 – Artificial daylight. TFL Light-Tungsten Filament. TL – 84 Light-Point of Sale UVB Light-Ultra Violet CWF Light-Cool white fluorescent Hour Meter-Imported Angle of viewing booth – 45 degree Viewing Booth Material – Wood or Steel Time Totalizer – Upto 99999.9 hours Pacorr color matching cabinet is manufactured strictly as per ASTM standards.          

10. LABORATORY HOT AIR OVEN Pacorr Laboratory Hot Air Oven is used to determine the effect of ageing on various physical properties of different materials may be carried out by heating the material under test inside an air oven so that the effects of long-term ageing are reproduced within a much shorter duration of time. For this determination, physical properties of the material under test are determined before ageing and then again after ageing the test specimen at the specified temperature for a specified duration of time and subsequent cooling to the room temperature before conducting the tests again. Determination of various physical characteristics different materials and products at elevated temperatures may be carried out by heating the test specimen to the appropriate temperature inside a constant temperature air oven and determining the required characteristics with the specimens kept under the same temperature. For this purpose the equipment needed for conducting the determination can either be kept inside the oven along with the test specimens, or, if this is not feasible because of certain constrains, by taking the heated specimens out from the oven and conducting the test in still air within the shortest possible span of time. TECHNICAL DATA of            Model: PCLHAO-1 Inner dimensions of test chamber: 450 x 450 x 450 mm Temperature range: Ambient to 250º C Power Requirement: 220/ 230 V AC Result Display: LED (Digital) Tolerance: ± 2ºC Resolution: 1ºC Power Supply: 15A, 220V, Single phase, 50 Hz Timer Range: Up to 999 hrs Temperature Range: Ambient to 250ºC Shelves: 2 Nos. Features:

11.              Double walled chamber; inside body: stainless steel Outer body – Mild Steel neatly powder Coated Insulation between the double walls is provided by imported mineral glass wool Microprocessor based Programmable Digital temperature controller cum indicator Highly accurate test results under uniform temperatures in the chamber Maximum Thermal Efficiency by insulation means. Digital Preset Timer Provision of Set Time and Process time on timer display Inbuilt Auto tuning function Bright LED display Inbuilt Auto tuning function Provision to set PV and SV value Equipped with rapid air circulation fan for uniform and homogenous heating and maintaining temperature inside the chamber VACUUM LEAK TESTER- DELUXE Pacorr Vacuum Leak Tester is used to determine the leakage in packaging materials that are mostly used in industries must be intact and leak proof. This is why the manufacturers need to test the integrity and intactness of the packaging materials they are manufacturing or using for their products. The vacuum leak tester uses heavy vacuum to detect any leakage or holes in the packaging materials and gives the accurate test results about the integrity of the specimen. The instrument has a digital display that gives the exact reading of the test parameters for better precision. TECHNICAL DATA             Model: PCVLT-1 Vacuum Range: 150 – 600mm-Hg Vacuum Pressure Gauge: Analogue Display: Digital LED Desiccator: 12” (Diameter-300mm) Least Count: 1.0 mm Hg Keyboard: Soft Touch Keys Power: 220 V, Single Phase, 50 Hz Hold Time: Upto 999 Seconds Material: Mild Steel duly powder coated Power: 230 V AC, 50 Hz. Weight 14Kgs. Accessories: Main Apparatus along with vacuum pump Polycarbonate desiccator along with connecting cable. User Manual   

12. VACUUM LEAK TESTER- DIGITAL Pacorr Vacuum Leak Tester is used to determine the leakage in packaging materials that are mostly used in industries must be intact and leak proof. This is why the manufacturers need to test the integrity and intactness of the packaging materials they are manufacturing or using for their products. The vacuum leak tester uses heavy vacuum to detect any leakage or holes in the packaging materials and gives the accurate test results about the integrity of the specimen. The instrument has a digital display that gives the exact reading of the test parameters for better precision. TECHNICAL DETAILS:               Model: PC1961 Microprocessor based Fully Automatic Instrument Vacuum Range: 150 - 600 mm- Hg Desiccator: 12” (300mm Diameter) Display: Alphanumeric LCD with Backlit Keyboard: Soft Touch Membrane Keys USB Port: For Dot Matrix Printer with parallel interface Vacuum Pressure Gauge: Digital Vacuum and Hold time: Programmable Hold Time: Upto 999 Seconds Automatic Last result storage Construction of cabinet: Stainless Steel Power: 230V AC, 50 Hz Weight: 13 Kg (Approx.) Accessories:  Main apparatus along with vacuum pump.  Polycarbonate desiccator along with connecting cable  User manual  Printer: Client Scope

13. PRECISION COLORIMETER Colour is one of the most important aspects for many different industrial products such as inks, foods, paints etc. The manufacturers need to know the exact quality and composition of the colours of the products that they are delivering to their customers. The colorimeter is an instrument that is used in industries to determine the Colour quality and composition of different colours of products. The instrument can provide very precise testing results about the consistency as well as the quality of colours of the products. TECHNICAL DATA       Model Viewing Geometry Measuring Aperture Detector Locating Measurement End Face face Color Space Color Difference Formula Light Source Light Source Device Errors Between Each Equipment Storage Repeatability measurements of standard white plate Weight Dimension Power source Lamp Life Charging Time : PC110 : 8/d : Φ4mm : Silicon photoelectric diode : Illuminating Locating/Cross Locating : Large stable end-face and small concave-convex end-        : CIEL*a*b*C*h* CIEL*a*b* CIEXYZ : △E*ab △L*a*b* △E*C*h* : D65 : LED blue light excitation : ≤0.80ΔE*ab : 100pcs standards 20000pcs samples : Standard deviation within ΔE*ab 0.08 Average of 30      : 450g : 205×67×80 mm : Rechargeable lithium-ion battery 3.7V@3200mAh : 5 years, more than 1.6 million measurements : 8 hours–100% electricity

14.  PC Software : CQCS3 Software DIGITAL THICKNESS GAUGE The digital thickness gauges are used in a variety of industries to determine the accurate thickness of different surfaces and materials such as plastic sheets, plastic films, bottles, metal sheets and so forth. The instrument is given with a digital display which displays the thickness of the surface being measured. TECHNICAL DATA  Model: PCDTG             Range: Digital step: Indicator No.: Type: Mass: Measuring force: Scale: Max. response speed: Power supply: Battery life: ZERO/ABS: Digimatic data output: 0 - 10 mm 0.01 mm 543-400BS (ID-C) Ceramic-tipped contact points 255 g ≤ 1.5 N Capacitance type ABSOLUTE linear encoder Unlimited 1 battery SR-44 approx. 7000 hours Yes Yes         ON/OFF: DATA/HOLD: Lock function: PRESET: Calculation function: Counting direction switchable: Accuracy: Inch-Metric: Yes Yes Yes Yes Yes Yes ±10 µm(excluding quantizing error) Metric

15. DIGITAL MICROMETER TECHNICAL DATA Model: Range: Accuracy: Parallelism: Mass: Digital step: Measuring surfaces: Battery life: Delivered: PCDM (293-821-30) 0 - 25 mm ±2 µm 2 µm 275 g 0,001 mm Carbide-tipped, micro-lap finish Approx. 2 years Including box, key, 1 battery, certificate of inspection Yes Yes Yes No Digital Thimble and sleeve satin chrome finish, ø18 mm ø6,35 mm, spindle pitch 0,5 mm Metric ORIGIN: Low voltage alarm: Function lock: Data output: Digital/Analog: Scale: Measuring spindle: Inch-Metric: