1 / 2

Fix SSID Not Broadcasting on Your Extender | 192.168.188.1 Admin Setup Guide

Is your WiFi extender not showing its network name (SSID)? Learn how to fix SSID not broadcasting issues using the 192.168.188.1 admin setup. Follow step-by-step troubleshooting tipsu2014enable SSID broadcast, update firmware, reset your extender, and restore seamless connectivity.

RepeaterSetup
Télécharger la présentation

Fix SSID Not Broadcasting on Your Extender | 192.168.188.1 Admin Setup Guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Fix SSID Not Broadcasting on Your Extender | 192.168.188.1 Admin Setup Guide If your WiFi extender is not broadcasting its SSID (network name), it can connection. Use the 192.168.188.1 admin setup to troubleshoot and resolve this issue effectively. disrupt your internet How to Access the 192.168.188.1 Admin Panel 1. Connect to Your Extender: Ensure your device is connected to the extender’s WiFi network. 2. http://192.168.188.1 in the address bar and press Enter. Open Your Web Browser: Type 3. Login: Enter the default username and password (commonly admin/admin or admin/password).

  2. Troubleshooting SSID Not Broadcasting 1. Check Wireless Mode: Ensure it is set to 802.11b/g/n. 2. Enable SSID Broadcast: Go to the Wireless Settings and make sure SSID Broadcast is enabled. 3. Update Firmware: Look for firmware updates in the admin panel to improve performance. 4. Reset the Extender: If issues continue, press the reset button on the device to restore factory settings. 5. Reduce Interference: Move the extender away from other electronic devices that might cause signal interference. Conclusion If your extender isn’t broadcasting its SSID, accessing the 192.168.188.1 admin setup and following these troubleshooting steps can help fix the issue. If problems persist, don’t hesitate to contact customer support for further assistance.

More Related