hardwood floor refinishing Maryland

1. All That You Need to Know About Hardwood Floor Refinishing Hardwood flooring, though strong and sturdy, gets to age with time and needs a periodical makeover. As any contractor specializing in hardwood floor refinishing in Maryland or wherever you might be located will tell you, floor refinishing involves sanding the surface and applying a fresh coat of stain and lacquer. With only a drum sander and the required stain and lacquer, you can breathe new life into your existing floor. You can either do it yourself or call experienced agencies for hardwood floor refinishing in Maryland for it. The advantage of hardwood flooring over engineered wood is the lifecycle factor.

2. Hardwood flooring can take about 10 to 12 sanding and refinishing cycles during its lifetime while for engineered wood it is once or twice based on the thickness of the wood. If you are a DIY person in Maryland and want to do the refinishing yourself, do it only if you are confident. The main issue is handling the heavy drum sander. Linger too long at a spot and you will carve a dent in the floor that will stare back at you. Before starting on the job of hardwood floor refinishing Maryland, take a few precautions. Refinishing is noisy and dusty so always wear a respirator or a good dust mask, goggles, and ear protection. Use plastic to seal doorways and turn off HVAC to prevent dust from circulating around the house. There are two ways of hardwood floor refinishing in Maryland.

3. Buffing Buffing is easier of the two and should be done only when there is light wear and tear, a few scratches on the surface, and the wood below is in good shape. The process is also called screening. Rent a floor buffing tool with a few screen grits to restore the shine and luster of the floor. After finishing the floor, sweep and vacuum up all dust between each grit. Finally, refinish the floor with either a low-VOC water-based finish or a polyurethane floor finish. Buffing cannot be done if the floor has been waxed or cleaned with oil or soap and the residue is not removed first.

4. Sanding Sanding completely restores old and damaged flooring and provides the opportunity to change the color of the floor with a stain. Rent a sander and a series of grits. Remove the baseboards and while sanding, keep the drum moving constantly to prevent gouging the floor. Use a hand-held sander to finish the edges close to the walls. When finished with the sanding, fill any cracks with color-matched wood filler. Apply the first coat of stain and allow it to dry thoroughly before applying another two or three stains. While on the face of it, the processes might look simple but it is not. It is always advisable to get in touch with the pros for hardwood floor refinishing in Maryland.