1 / 2

Snapmaker 2.0 3D Printing Feature Review

The Snapmaker 2.0 is still primarily an FFF or, if you did prefer, an FDM 3D printer. The machine has a sleek, remarkably strong anodized aluminum chassis with an open design and a Cartesian coordinate system. The A350T variation, the largest of the three variants, has a construction capacity that measures 320 by 350 by 330mm. Since this is substantially bigger than the typical desktop 3D printer, it should have enough room for the majority of projects that are of a reasonable size.

Roger18
Télécharger la présentation

Snapmaker 2.0 3D Printing Feature Review

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Snapmaker 2.0 3D Printing Feature Review The Snapmaker 2.0 is still primarily an FFF or, if you did prefer, an FDM 3D printer. The machine has a sleek, remarkably strong anodized aluminum chassis with an open design and a Cartesian coordinate system. The A350T variation, the largest of the three variants, has a construction capacity that measures 320 by 350 by 330mm. Since this is substantially bigger than the typical desktop 3D printer, it should have enough room for the majority of projects that are of a reasonable size. The system's single printer, which includes a magnetic sensor as standard, is thin and exceptionally well-made. The nozzle's maximum temperature is 275°C. This configuration should have no trouble printing with materials like PLA, ABS, PETG, and TPU because it has a direct drive extruder. Concerning the build plate, Snapmaker has decided to use a magnetic print bed with smooth build surfaces that are fastened on either side. The user would simply be able to flip the bed over and use the other side if one of the faces were to experience damage, which is a modest but pleasant concern. It is essential for part adhesion and to prevent warping on the underside of prints that the bed heats up to a maximum of 80°C.

  2. It's also important to note that the Snapmaker 3D printer 2.0 has an Android controller and a Cortex-M4 processor (Quad Core A7 CPU @ 1.1GHz). The Snapmaker's 5" full- colour touchscreen has a stunning graphical user interface and is incredibly responsive. It can be used to preview print models, adjust the bed, load filament, and manage print jobs. Additionally, the device has Wi-Fi capabilities, which is always a blessing for remote work. With Snapmaker 2.0, loading filament is quite simple. When you select Control Change Filament, you will be prompted to increase the nozzle temperature by the tablet. Click load after inserting the filament into the printing module's top hole. To upload the material, reverse the process. This Snapmaker 3D printer software has throttled the print speed. It's to account for the screw-driven Y and X axes or the modest cooling fan. Although we have used it at speeds higher than recommended, and the results have been flawless, we chose to maintain these settings for the test prints.

More Related