1 / 5

Wire Wound RTD

Techno Controls, a leading manufacturer of temperature sensors, produces a wide range of wire wound temperature sensors.

Technocontrols
Télécharger la présentation

Wire Wound RTD

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Wire Wound RTD • https://www.technocontrols.com

  2. Bearing Temperature Detectors Product Overview • Wire wound elements are basically a “hand made“ product which involves lot of skilled Labour. • It is manufactured by placing a coil of thin wire (7 microns to 35 microns) into a ceramic insulator.

  3. Bearing Temperature Detectors Main Features • For measuring tolerance, the measuring wires are connected to the lead at 5 mm from the closed end. • Normally, 1mA sensing current is recommended for sensing purposes. • A 2.8 mm x30 mm element will have self heating characteristics of 0.01 per deg c/mW. In air, it increases about 30 times. • With adequate support, the elements will withstand vibration level of 30g over the frequency range of 10 Hz to 30 Hz.

  4. Bearing Temperature Detectors Construction • The resistance of the coil is suitably adjusted to the ohms corresponding to that particular temperature. • Ideally, this coil should be freely suspended for natural expansion and contraction. However, such construction is not immune to vibration and hence it is not adopted for industrial application. • For industrial application, normally partially supported or fully supported construction is used which are quite immune to vibration. • The extended leads are quite rugged as compared to the alpha wire and normally made from Pt base metal (for Platinum resistors). • The choice of ceramic insulator is also very important as any impurities in the insulator may detoriate the characteristic of the alpha wire.

  5. Techno Controls • Plot No. 54/1, Survey No. 299,Meladi Estate, Nr. Gota Railway Crossing,Gota, Ahmedabad - 382481, Gujarat, India. • Mobile: +91-99099 25234Telefax: +91-2717-241315,241312Email: info@technocontrols.com • www.technocontrols.com

More Related