1 / 14

MUCOOL ADVANCED M.T.F. & M.I.C.E. LAYOUTS

MUCOOL ADVANCED M.T.F. & M.I.C.E. LAYOUTS. August 12-13, 2002 Edgar L. Black IIT. CURRENT EFFORTS FOR M.T.F. FINALIZE DETAILS OF FORCED COOLANT FLOW ABSORBER TO BE INSERTED INTO THE LAB G MAGNET. COORDINATE DESIGN OF THE CONVECTIVE TYPE ABSORBER FOR THE SAME LOCATION (KEK COLLABORATION).

adamdaniel
Télécharger la présentation

MUCOOL ADVANCED M.T.F. & M.I.C.E. LAYOUTS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MUCOOL ADVANCED M.T.F. & M.I.C.E. LAYOUTS August 12-13, 2002 Edgar L. Black IIT Edgar L. Black

  2. CURRENT EFFORTS FOR M.T.F. • FINALIZE DETAILS OF FORCED COOLANT FLOW ABSORBER TO BE INSERTED INTO THE LAB G MAGNET. • COORDINATE DESIGN OF THE CONVECTIVE TYPE ABSORBER FOR THE SAME LOCATION (KEK COLLABORATION). • COMPLETE WINDOWS DESIGN WITH SHOP DRAWINGS FOR FABRICATION (TO BE SUBMITTED TO THE MISSISSIPPI COLLABORATION AT THE END OF THIS MEETING). • INITIATE THE INTERFACE RESOLUTION OF UP & DOWN SIDE VACUUM WINDOW DESIGN REQUIREMENTS, (INCLUDING IMMEDIATE AND FUTURE EXPERIMENT PROGRAMS) • START INSTRUMENTATION HARDWARE INTEGRATION DESIGN FOR THE IMMEDIATE TEST PLANS. Edgar L. Black

  3. MAGNET, CRYOSTAT & ABSORBER LAYOUT Edgar L. Black

  4. MTF ABSORBER FORCED FLOW Edgar L. Black

  5. WINDOW/ ABSORBER SEAL DETAIL(SECTION OF THE MANIFOLD) Edgar L. Black

  6. ABSORBER WINDOW DETAIL Edgar L. Black

  7. WINDOW TEST PLATE Edgar L. Black

  8. VACUUM VESSEL WINDOW Edgar L. Black

  9. CURRENT EFFORTS FOR M.I.C.E. • NEED MORE STUDIES TO INTEGRATE NEW M.GREEN MAGNET DESIGN INTO THE SFOFO1 CONFIGURATION (CONFLICT WITH THE RF FEEDS). • INITIATED PLANT LAYOUT COORDINATION FOR THE INSTALLATION AT RAL (COMMUNICATION WITH IOURY) • NEED MORE INFORMATION ON THE PLANT FACILITIES Edgar L. Black

  10. SFOFO/M.I.C.E. CONFIGURATION Edgar L. Black

  11. M.I.C.E. SFOFO Edgar L. Black

  12. LOCATION IN QUESTION PARTIAL VIEW OF THE R.A.L. FACILITY Edgar L. Black

  13. LOCATION ENLARGED Edgar L. Black

  14. FUTURE ACTIVITIES WITH TIME DURATIONS (HRS) 1- FABRICATION OF 21CM WINDOWS AND PRESSURE TEST PLATES. 480 3 OR 5 WINDOWS FOR EACH MATERIAL? 2 - RESOLVE VACUUM WINDOW ISSUES AND COMPLETE THE DESIGN FOR FABRICATION 80 3 -PERFORM PHOTOGRAMETRY MEASUREMENTS OF THE AS BUILT WINDOWS AT FERMILAB. 300 5 - SET UP FACILITY AT N.I.U. FOR WATER AND CRYO PRESSURE BURST TESTS AND TEST. 80 6 - PERFORM PHOTOGRAMETRY MEASUREMENTS DURING TEST AT N.I.U. 100 7 - FABRICATION OF MANIFOLD ASSEMBLY AND ACCEPTANCE TEST. 200 8 - COMPLETE INFRARED HEAT TRANSFER FLOW WITH THE 15 CM MANIFOLD ASSEMBLY. 60 9 - PROCURE (OR BORROW) VERTICAL CRYOSTAT FOR THE ABSORBERS FLOW TEST. 160 OR 60 10 - SETUP CRYO FLOW TEST SYSTEM (AT FERMILAB OR N.I.U.) AND PERFORM TESTS. 320 Edgar L. Black

More Related