1 / 29

Wave Behaviors

adamdaniel
Télécharger la présentation

Wave Behaviors

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


    1. Wave Behaviors Physics 111

    3. The degree of difference between the two mediums determines how much of the incident wave is reflected. With similar mediums (fresh water and salt water), most of the incident wave will be transmitted. With different mediums (water and molasses), most of the incident wave will be reflected. If a wave is travelling from a less dense to a denser medium, the reflected wave is inverted.

    4. Reflection and Inversion

    5. Video Clip link

    6. When a wave travels from a more to a less dense medium?

    7. Frequency The speed of a wave changes when the medium changes, but does the frequency also change? initial freq. = 5 waves per second (5 Hz). These waves travel down the loose slinky until they encounter the stiffer slinky.

    8. The speed of the waves will definitely change as they enter the stiffer slinky material, will you still seefive waves per second? Is it possible to see anything butfive waves per second? No If the frequency dropped to onlyfour waves per second, where would the fifth wave go? Waves can't just disappear. Likewise if the frequency were to increase, would a new wave appear out of thin air? Therefore frequency does not depend on medium

    9. Change in Wavelength One variable does change change when a wave enters a new medium? If the velocity changes, the frequency doesn't andif v = f ?is to be true, then the wavelength must also change.

    10. Wave Fronts A method of graphically representing waves

    11. draw lines called rays. A ray is simply a line drawn in the direction of the wave motion and it is perpendicular to the wave fronts

    12. The normal, which is just another name for a perpendicular, or 90 degree, line give a reference point

    13. Law of Reflection angle of incidence the angle between normal and incident ray (symbol ?i) angle of reflection- the angle between the normal and the reflected ray (symbol ?r) Law of Reflection ?i = ?r Note The angles of incidence and reflection are measured from the normal to the ray and not from the boundary to the ray.

    14. Superposition When two waves pass through the same place at the same time, they will combine to form a wave that is some combination of the two. This process is called interference. Constructive interference - the two waves combine to reinforce each other and produce a larger wave than the original waves Destructive interference - the waves tend to cancel each other, then the interference is Principle of superposition- the wave produced by any interference is simply the algebraic sum of the two original waves.

    15. Video Clips constructive and destructive interference Link (slide 27/40)

    16. Principle of Superposition

    17. Wave Phases and Standing Waves phase -the relative position of the crests of two different waves. constructive interference, the crests line up and the waves are said to be "in phase." destructive interference , the crests do not line up and the waves are said to be "out of phase."

    18. Standing Waves An interesting situation can arise if the two interfering waves have just the right frequency. example: a slinky has one end attached to a wall and you are shaking the other end. As you send waves down the slinky, they will reflect from the fixed end. These reflected waves then interfere with the incident waves being produced by your hand.

    19. Usually the interference that takes place in this situation produces a jumble of constructive and destructive interference. However, if the frequency of the waves is just right an interesting pattern will be seen. You will see a large amplitude wave that appears to stand still on the rope. nodes areas where destructive interference is always taking place antinodes areas of constructive interference,

    20. Standing Wave

    21. Standing Wave Simulation link (slide 29/40)

    22. Standing Wave Frequency fundamental frequency the smallest frequency that will produces a standing wave If you double the frequency of a standing wave, you will produce another standing wave with more nodes and antinodes.

    23. Sample Problem The distance between adjacent nodes in a vibrating string is 15 cm. What is the wavelength of the standing wave?

    24. Give it a go. A standing wave wit ha frequency of 45.0 Hz is produced in a string. The distance between the 2nd node and the fifth node is 36 cm. What is the wavelength of the wave

    25. Refraction The speed of a mechanical wave depends on the medium it is travelling in. refraction when a wave changes its direction due to a change in speed. Since the waves frequency remains the same, the wavelength must also change.

    26. Diffraction When waves encounter a barrier, they tend to bend around it and spread into the area behind the obstacle. This phenomenon is called diffraction. The larger the wavelength of the waves as compared to the size of the obstacle, the greater the amount of diffraction.

    28. link Refraction and Diffraction

More Related