1 / 54

Ch. 20: Electrochemistry

Ch. 20: Electrochemistry. Electrochemistry is the branch of chemistry that deals with relationships between electricity and chemical reactions. We are going to study a type of reaction where electrons are transferred between reactants.

adia
Télécharger la présentation

Ch. 20: Electrochemistry

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Ch. 20: Electrochemistry • Electrochemistry is the branch of chemistry that deals with relationships between electricity and chemical reactions. • We are going to study a type of reaction where electrons are transferred between reactants. • These reactions are called “oxidation-reduction reactions”, or redox reactions. • Before we begin studying redox reactions, we need to cover… • Oxidation Numbers • Oxidation numbers allow us to keep track of the electrons gained and lost during chemical reactions. • The oxidation #, (or oxidation state), of an element in a compound is a hypothetical charge based on a set of rules…

  2. Rules for Assigning Oxidation Numbers • Rule #1: An atom in its elemental form has an oxidation # of zero. • Examples: H2 , Ag, Br2, Pb…(Ox. #’s = zero for each element) • Rule #2: Monatomic ions have an Ox. # equal to its charge. • Examples: K+ (Ox. # for K = +1); S2−(Ox. # for S = −2) • Rule #3: Hydrogen is +1 when attached to nonmetals in a compound and −1 when attached to metals in a “hydride”. • Examples: HCl (Ox. # for H= +1); NaH (Ox. # for H= − 1) • (* Since the compounds are electrically neutral, we can then say that the Ox. # of Cl must be −1, and Na is +1.) • Rule #4: Fluorine is −1 in all compounds, and Oxygen has an Ox. # of −2 in all compounds except peroxides when it’s Ox. # is −1… O22− • Examples: Na2O… (Ox. # of oxygen = −2 while Na is +1) • H2O2 …(Ox. # of oxygen is −1 while H is +1) • Rule #5: The sum of the Ox. #’s in a compound is zero, and for polyatomic ions, the sum of the Ox. #’s equals the charge of the ion. • Example: HNO3…(H= +1, O= −2, so N = +5) SO42−…(O= −2, soS= +6)

  3. Redox Reactions • Now we can explore a redox reaction in detail… • Consider the reaction of zinc with an acid: • Zn(s) + 2H+(aq) Zn2+(aq) + H2(g) • If we examine the oxidation state of zinc, we see that zinc started out at zero and ended up at +2…it lost 2 electrons. • − The process in which a substance increases its oxidation state (by losing electrons) is called “oxidation.” • If we examine the oxidation state of hydrogen, we see that hydrogen started out at +1 and ended up at zero…it gained an electron. • − The process in which a substance decreases its oxidation state (by gaining electrons) is called “reduction.” • Zinc reduced hydrogen, so zinc is called the reducing agent. (In other words, the substance that is oxidized is the “reductant”. • Hydrogen oxidized zinc, so hydrogen is called the oxidizing agent. (In other words, the substance that is reduced is called the “oxidant”.

  4. Redox Reactions • The easiest way to remember the difference between reduction and oxidation is… • “LEO goes GER” • Losing Electrons = Oxidation Gaining Electrons =Reduction • Balancing Redox Reactions • In order to balance redox reactions we need to remember the following: • 1) Conservation of Mass: the amount of each element present at the beginning of the reaction must be present at the end. • 2) Conservation of Charge: electrons are not lost in a chemical reaction. They are transferred from one reactant to another. • Half-reactions are a convenient way of separating oxidation and reduction reactions. • Let’s look at an easy example…

  5. Redox Reactions • Consider the reaction: • Sn2+(aq) + 2Fe3+(aq) Sn4+(aq) + 2Fe2+(aq) • • The oxidation half-reaction is: • Sn2+(aq) Sn4+(aq) + 2e– (LEO) • (*Note that electrons are shown as a product…they are lost.) • • The reduction half-reaction is: • 2Fe3+(aq) + 2e– 2Fe2+(aq) (GER) • (*Note that electrons are shown as a reactant…they are gained.) • Now we’ll look at one that is more complicated, but it is still simply a redox reaction.

  6. Balancing Redox Reactions • Consider the titration of an acidic solution of Na2C2O4 with KMnO4... • MnO4−(aq) + C2O42−(aq)  Mn2+(aq) + CO2(g) • MnO4− is reduced to Mn2+…Manganese starts out at an oxidation state of +7 and is reduced to +2. • C2O42− is oxidized to CO2…Carbon starts out at an oxidation state of +3 and ends up at +4. • First, we have to write the 2 half-reactions: • MnO4−(aq) Mn2+(aq) (Reduction) • C2O42−(aq) CO2(g)(Oxidation) • Then we balance each half-reaction by following these steps… +7 -2 +3 -2 +2 +4 -2

  7. Balancing Redox Reactions • MnO4−(aq) Mn2+(aq) • C2O42−(aq) CO2(g) • a. First, balance the elements other than H and O… • (Nothing needs to be done yet for this half reaction….) MnO4−(aq) Mn2+(aq) • (Balance the carbon…) C2O42−(aq) 2CO2(g) • b. Then balance O by adding water… • MnO4−(aq) Mn2+(aq) + 4H2O(l) • (The oxygen is already balanced in this half-reaction…) C2O42−(aq) 2CO2(g)

  8. (Continued…) MnO4−(aq) Mn2+(aq) + 4H2O(l) • C2O42−(aq) 2CO2(g) • c. Then balance H by adding H+ (if in an acidic environment.) • 8H++ MnO4−(aq) Mn2+(aq) + 4H2O(l) • (Nothing needs to be done yet to this half reaction…) C2O42−(aq) 2CO2(g) • d. Finish by balancing charge by adding electrons…. • 8H+ + MnO4−(aq) Mn2+(aq) + 4H2O(l)(GER) • The left side Mn is +7 while the right side Mn is +2. We add the electrons to the left side of the equation…(How many are gained?) • 5e− + 8H+ + MnO4−(aq) Mn2+(aq) + 4H2O(l) • C2O42−(aq) 2CO2(g) (LEO) • The left side is −2 and the right side is 0. We put the electrons on the product side which shows the electrons being “lost.” • C2O42−(aq)  2CO2(g) + 2e− (Each carbon lost one electron.)

  9. (We are not done yet!!!) • The half-reactions need to be multiplied so that the # of electrons gained and lost is equal. • 2 x [5e− + 8H+ + MnO4−(aq) Mn2+(aq) + 4H2O(l)] • 5 x [C2O42−(aq)  2CO2(g) + 2e−] • Then you end up with… • 10e− + 16H+ + 2MnO4−(aq) 2Mn2+(aq) + 8H2O(l) • 5C2O42−(aq) 10CO2(g) + 10e− • Now you add the reactions together and cancel out items wherever possible… • 16H+ + 2MnO4−(aq) + 5C2O42−(aq) 2Mn2+(aq) + 8H2O(l) + 10CO2(g) • It is wise to double-check and see if everything is balanced, including the charge!

  10. What if the reaction were in a basic environment? • Add [OH−] to both sides of the reaction to cancel out the [H+] ions… • 16OH− + 16H+ + 2MnO4−(aq)+ 5C2O42−(aq)2Mn2+(aq) + 8H2O(l) +10CO2(g) + 16OH− • This results in water being formed… • 16H2O(l) + 2MnO4−(aq) + 5C2O42−(aq)  2Mn2+(aq) + 8H2O(l) + 10CO2(g) + 16OH− • Now we can simplify the equation by canceling out 8H2O(l) that appears on both sides of the equation… • 8H2O(l) + 2MnO4−(aq) + 5C2O42−(aq)2Mn2+(aq)+10CO2(g) + 16OH−(aq) • Balancing redox reactions is one of the most important aspects in Ch. 20! • We will practice more examples later!

  11. Voltaic Cells • The energy released in a spontaneous redox reaction is used to perform electrical work. • Voltaic or galvanic cells are devices in which electron transfer occurs via an external circuit. • Voltaic cells are spontaneous. • Example: If a strip of Zn is placed in a solution of CuSO4, Cu is deposited on the Zn and the Zn dissolves by forming Zn2+. • Zn is spontaneously oxidized into Zn2+ by the Cu2+. • The Cu2+ is spontaneously reduced into Cu0 by the Zn. • The entire process is spontaneous!

  12. Voltaic Cells • In order for the redox reaction to do work, the half-reactions need to be separated, and the electrons need to be able to flow from one half-reaction to the other. • Voltaic cells consist of • Anode (where oxidation occurs): Zn(s) Zn2+(aq) + 2e− • Cathode (where reduction occurs): Cu2+(aq) + 2e− Cu(s) • Salt bridge (used to complete the electrical circuit): cations move from anode to cathode, anions move from cathode to anode. • The two solid metals are the electrodes… [cathode, (+), and anode, (–).] • Next, we will look at a picture of this voltaic cell and then we will analyze what is going on…

  13. Voltaic Cells • As oxidation occurs, Zn is converted to Zn2+ and 2e−. These electrons flow towards the cathode where they are used in the reduction reaction which turns Cu2+ into Cu0. • We expect the Zn electrode, (the anode), to lose mass and the Cu electrode, (the cathode), to gain mass. • Electrons flow from the anode (−) to the cathode (+). • Electrons cannot flow through the solution; they have to be transported through an external wire. • Anions and cations move through a porous barrier or salt bridge.

  14. Voltaic Cells

  15. Voltaic Cells • Anions in the salt bridge move into the anode compartment to neutralize the excess Zn2+ ions formed by oxidation. • In the same way, cations from the salt bridge move into the cathode compartment to neutralize the excess negative charge formed during reduction. • Summary:Anode, (-), LEO, anions move towards anode • Cathode, (+), GER, cations move towards cathode • Electrons move from the anode to the cathode. • A way to remember them… ANO CPR • anode negative oxidation cathode positive reduction

  16. Voltaic Cells The zinc anode gets smaller and the copper cathode gets larger. ANO LEO CPR GER

  17. Voltage • The flow of electrons from anode to cathode is spontaneous. What is the “driving force”? • Electrons flow from anode to cathode because the cathode has a lower electrical potential energy than the anode. • Potential difference: difference in electrical potential. • The potential difference is measured in volts… • One volt (V) is the potential difference required to impart one joule (J) of energy to a charge of one coulomb (C). • Volts=Joules/Coulomb • A Coulomb of charge is ≈ 6.25 x 1018 electrons. • One mole of electrons is defined as having 96,500 C of charge. This is called a faraday, F… • 1 F = 96,500 C/mole of e–

  18. EMF • Electromotive force (emf) is the force required to push electrons through the external circuit. • Cell potential: Ecell is the emf of a cell. • This is known as the cell voltage. • Ecell is > 0 for a spontaneous reaction. • For 1Molar solutions & 1 atm pressure for gases, at 25º C (standard conditions), the standard emf (standard cell potential) is called Eºcell. • Example: For the zinc/copper voltaic cell: Eºcell = +1.10 V • The emf of a cell depends on the particular cathode and anode half-cells that are used.

  19. Standard Reduction (Half-Cell) Potentials • In order to determine the emf of a particular cell, you need to know the Eºred of each half cell involved. • • Standard reduction potentials, Eºred , are measured relative to a standard. • • We use the following half-reaction as our standard: • 2H+(aq), (1 M) + 2e– H2(g), (1 atm) Eºcell = 0V. • This electrode is called a standard hydrogen electrode, (SHE). • The SHE is assigneda standard reduction potential of zero. • The Eºred for other half-reactions can be measured relative to the SHE. • The emf of any cell can then be calculated from all of the standard reduction potentials that have been tabulated… • Eºcell = Eºred (cathode) – Eºred (anode)

  20. SHE and Zinc Anode Zinc is oxidized. Since the cell’s emf is + 0.76 V, that means the Eºred for [Zn2+(aq) + 2e−Zn(s)] would be –0.76 V.

  21. Eºcell • Practice Problem: The standard emf for the following cell is 1.46 V. • In+(aq) + Br2(l) In3+ (aq) + Br−(aq) • Calculate the Eºred for the reduction of In3+ to In+. • First, let’s break this up into the two half-reactions… • (LEO ANO) In+(aq) In3+(aq) + 2e− Eºred = ? • (GER CPR) 2e− + Br2(l)  2Br−(aq) Eºred = +1.06 V • Plug and Chug… Eºcell = Eºred (cathode)−Eºred (anode) • 1.46 = 1.06 – [Eºred(anode) ] • Therefore… Eºred (anode) = – 0.40 V • Note: This reaction is spontaneous. Also, In+ was oxidized in this reaction, so you would expect the value for Eºred to be (−).

  22. Eºcell • Changing the coefficients of a half-reaction does not change Eºred. • Zn2+(aq), (1 Molar)  Zn(s)Eºred = – 0.76 V • 2Zn2+(aq), (1 Molar)  2Zn(s) Eºred = – 0.76 V • As you may suspect, the concentration will change Eºcell as we will see later on in the notes. • The cathode reaction (CPR) of a voltaic cell will always have the more positive Eºred than the reaction at the anode (ANO). • In essence, the greater driving force of the cathode half-reaction is used to force the anode reaction to occur “in reverse” as an oxidation. • The entire process ends up being spontaneous.

  23. Eºcell • Practice Problem: A voltaic cell is based on the following two standard half-reactions… • Cd2+(aq) + 2e− Cd(s) • Sn2+ (aq) + 2e− Sn(s) • Which reaction takes place at the cathode and which is at the anode? • Look up the Eºcell for each in Appendix E… • Cd2+… – 0.403 V Sn2+… – 0.136 V • Since Sn2+ is “more positive”, then it will be reduced at the cathode. • Therefore, Cd2+ will be oxidized at the anode. • What is the value for Eºcell? • Eºcell = Eºred(cathode) – Eºred(anode) • Eºcell= –0.136 V – (– 0.403) = +0.267 Volts • Note: The reaction had to be positive (and spontaneous) for a voltaic cell!!

  24. Oxidizing and Reducing Agents • We can use this table to determine the relative strengths of reducing (and oxidizing) agents. • The more positive Ered the stronger the oxidizing agent on the left. • The more negative Ered the stronger the reducing agent on the right. • We can use this to predict if one reactant can spontaneously oxidize another.

  25. Oxidizing and Reducing Agents

  26. EMF and Free Energy • How does emf relate to ∆G? • ∆G = – nFE • where... n = # of electrons transferred during the process • F = 96,500 C/mole • E = cell potential • Since n and F are positive, if E > 0 then G < 0 and the reaction would be spontaneous. • If the reactants and products are in their standard states, then… • ∆Gº = – nFEº

  27. Effect of Concentration on Cell EMF • The Nernst Equation • A voltaic cell will function until E = 0, at which point equilibrium has been reached. • The point at which E = 0 is determined by the concentrations of the species involved in the redox reaction. • The Nernst equation relates emf to concentration… • RT lnQ • or expressed as log base 10… 2.303 RT • (See p.799 in the text for the derivation.) E = Eº – nF log Q E = Eº – nF

  28. The Nernst Equation • When T = 25º C, the equation is simplified to… • 0.0592 V • Let’s see how this equation can be used… • Zn(s) + Cu2+(aq) Zn2+(aq) + Cu(s) • At standard conditions, the Zinc/Copper cell has an emf of +1.10 V. What is the voltage of the cell at 25º C when [Cu2+]= 5.0 M and [Zn2+] = .050 M? • Recall that Q = [products]/[reactants]. (Remember, pure solids and liquids do not appear in the expression for Q!) • Therefore… E= 1.10 V – 0.0592 V log [0.050]/[5.0] • Since Q < 1, then log Q < 0, and this will increase the voltage… • E = 1.16 Volts E = Eº – log Q n 2 e–

  29. Concentration Cells • The Nernst equation shows us that using the same species in the anode and cathode compartments of a cell but at different concentrations then a voltage will be generated. • For example… • If the concentrations of [Ni2+] are unequal, a voltage will be generated.

  30. Concentration Cells • At the anode, Ni(s)  Ni2+ increasing the concentration of nickel ions in this compartment. • At the cathode, Ni2+ Ni(s) and the concentration of nickel ions in this compartment is reduced. • Therefore… • Q = [Ni2+]dilute/[Ni2+]concentrated • At 25º C… • E = 0 – 0.0592 log [0.001]/[1] = 0.0888 V • When the compartments reach equilibrium, emf = zero. • The pH meter functions on this principle, and so does your heartbeat! 2 e−

  31. Cell EMF and Chemical Equilibrium • A voltaic cell is functional until E = 0 at which point equilibrium has been reached. The cell is then “dead.” • A system is at equilibrium when G = 0. • From the Nernst equation, at equilibrium and 298 K (E = 0 Volts and Q = Keq): • 0 = Eº – RT ln Keq • This equation can be simplified at 25º C to… • log Keq = nEº/0.0592 • So you can calculate Keq of a redox reaction by knowing Eº or vice versa! nF

  32. Batteries • A battery is a portable, self-contained electrochemical power source consisting of one or more voltaic cells. • The (+) end of the battery is called the cathode, and the (–) end is called the anode. • If you wanted to generate 9 V, you will have to link together multiple cells in series since no single redox reaction can produce that much voltage. • Primarycells cannot be recharged. • Secondarycells are rechargeable.

  33. Types of Batteries • Lead-Acid Battery (12 V car battery): • Cathode: lead dioxide plate • PbO2(s) + HSO4−(aq) 3H+(aq) + 2e− PbSO4(s) + 2H2O • Anode: (lead plate): • Pb(s) + HSO4−(aq) PbSO4(s) + H+(aq) + 2e− • The overall electrochemical reaction is • PbO2(s) + Pb(s) + 2SO42−(aq) + 4H+(aq) 2PbSO4(s) + 2H2O(l) • Ecell = Ered (cathode) – Ered (anode) • Ecell = (+1.685 V) – (– 0.356 V) • Ecell = +2.041 V. • Six of these cells are linked in series to make 12 V, & wood or glass-fiber spacers are used to prevent the electrodes from touching.

  34. Lead Acid Batteries

  35. Lead-Acid Batteries • Lead-Acid batteries can be recharged. • [H2SO4] decreases as the battery discharges and increases as the cell is charged back up while the reactions run in reverse. • H2SO4 is much more dense than H2O, so the condition of the battery can be monitored by testing the specific gravity, (density), of the solution… • * specific gravity = 1.25 to 1.30 charged up and ready to go! • * specific gravity < 1.20 needs charging • These batteries are called “wet cells” because the electrolyte is a liquid.

  36. Alkaline Batteries (Dry Cells) • The most common nonrechargeable battery is the alkaline battery. • • Powdered zinc metal is immobilized in a gel in contact with a concentrated solution of KOH. • The electrolyte is a base, thus these batteries are alkaline. • The electrolyte is a paste, hence the name “dry cell”. • • The reaction at the anode is: • Zn(s) + 2OH−(aq) Zn(OH)2(s) + 2e− • • The reaction at the cathode is the reduction of MnO2: • 2MnO2(s) + 2H2O(l) + 2e− 2MnO(OH)(s) + 2OH−(aq) • • The cell potential of these batteries is 1.55 V at room temperature.

  37. Alkaline Batteries (Dry Cells)

  38. Other Batteries • A common rechargeable battery is the nickel–cadmium (NiCad) battery. • The reaction at the cathode is: • 2NiO(OH)(s) + 2H2O(l) + 2e− 2Ni(OH)2(s) +2OH−(aq) • The reaction at the anode is: • Cd(s) + 2OH−(aq) Cd(OH)2(s) + 2e− • The cell potential of this battery is about 1.30 V at room temp. • Cadmium is a toxic heavy metal. • There are environmental concerns to be addressed with respect to disposal of such batteries. • • Other rechargeable batteries have been developed. • - NiMH batteries (nickel–metal–hydride). • - Li–ion batteries (lithium–ion batteries)…(greater energy density)

  39. Corrosion • An example of an undesirable redox reaction is the corrosion of metals. • • A metal is attacked by a substance in the environment and converted to an unwanted compound. • • Consider the corrosion (rusting) of iron: • Since Eºred(O2) > Eºred(Fe2+), iron can be oxidized by O2. • Cathode: • O2(g) + 4H+(aq) + 4e− 2H2O(l) Eºred = +1.23 V. • Anode: • Fe(s) Fe2+(aq) + 2e−Eºred = −0.44 V.

  40. Corrosion •Dissolved oxygen in water usually causes the oxidation of iron. • The Fe2+ initially formed can be further oxidized to Fe3+, which forms rust, Fe2O3·xH2O(s). • Oxidation occurs at the site with the greatest concentration of O2. • Other factors to consider are the pH, presence of salts, stress on the iron, and contact with other metals.

  41. Corrosion of Iron

  42. Preventing the Corrosion of Iron • • Corrosion can be prevented by coating the iron with paint or another metal to keep it away from O2 and water. • Another way to protect the iron is by a process called cathodic protection. • Coating iron with a layer of zinc, “galvanizediron”, can protect the iron from corrosion even after the surface coat is broken. • Zn2+(aq) + 2e− Zn(s)Eºred = − 0.76 V • Fe2+(aq) + 2e− Fe(s)Eºred = − 0.44 V • The standard reduction potentials indicate that Zinc is easier to oxidize than iron, so the Zinc will be oxidized! • Zinc is the “sacrificial anode” and is slowly destroyed. Iron acts as the cathode where the oxygen is reduced. • • We can use something similar to protect underground pipelines. • Often, Mg is used as a sacrificial anode…(Eºred = − 2.37 V)

  43. Preventing the Corrosion of Iron

  44. Preventing the Corrosion of Underground Pipes

  45. Electrolysis • It is possible to cause a nonspontaneous redox reaction to occur. Such processes are driven by an outside source of electrical energy. • These reactions are called “electrolysis reactions” and take place in “electrolytic cells”. • In voltaic and electrolytic cells, reduction occurs at the cathode, and oxidation occurs at the anode. • However, in electrolytic cells, electrons are forced to flow from the anode to the cathode. • In electrolytic cells the anode is positive and the cathode is negative. • (In voltaic cells the anode is negative and the cathode is positive.) • Here’s what an electrolytic cell looks like…

  46. Electrolytic Cell

  47. Electrolysis of Molten NaCl • Example of Electrolysis: • Cathode (GER): 2Na+(l)+ 2e− 2Na(l) • Anode (LEO): 2Cl−(l) Cl2(g) + 2e− • A battery or some other source of direct current acts as an electrical pump pushing electrons to the cathode and pulling them from the anode. • As Na(s) is produced at the cathode (–) , additional Na+ migrates in. • As Cl2(g) is produced at the anode (+), additional Cl− migrates in. • Industrially, electrolysis is used to produce metals like aluminum and gases like chlorine.

  48. Electrolysis of Aqueous Solutions • Do we get the same products if we electrolyze an aqueous solution of the salt? • No! Water complicates the issue. • Example: Consider the electrolysis of NaF(aq): • Cathode (GER): Na+(aq) + e− Na(s)Eºred = − 2.71 V • Cathode (GER): 2H2O(l) + 2e− H2(g) + 2OH−(aq)Eºred = − 0.83 V • Thus water is more easily reduced than the sodium ion! • Anode (LEO): F−(aq) F2(g) + 2e−Eºred = +2.87 V • Anode (LEO): 2H2O(l) O2(g) + 4H+(aq) + 4e− Eºred = +1.23 V • Thus it is easier to oxidize water than the fluoride ion. • What you end up doing is electrolyzing water into H2(g) and O2(g)!

More Related