1 / 29

Right-of-Way Procedures & Safety Rules Compliance

Right-of-Way Procedures & Safety Rules Compliance. Right-of-way procedures Safety rules compliance Technology for wayside worker protection. Right-of-Way Procedures. Metrorail Safety Rules and Procedures Handbook OCC controllers Train operators Wayside workers. Radio Announcements.

ainsley-puckett
Télécharger la présentation

Right-of-Way Procedures & Safety Rules Compliance

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Right-of-Way Procedures & Safety Rules Compliance

  2. Right-of-way procedures • Safety rules compliance • Technology for wayside worker protection

  3. Right-of-Way Procedures • Metrorail Safety Rules and Procedures Handbook • OCC controllers • Train operators • Wayside workers

  4. Radio Announcements • OCC makes blanket radio announcement to train operators.

  5. Radio Announcements • Dupont Circle accident: Single radio announcement was transmitted 1 hour before the accident.

  6. Radio Announcements • Eisenhower Avenue accident: Single radio announcement was transmitted 2 hours before the accident.

  7. Radio Announcements • Train operators using affected lines were not required to acknowledge the radio notifications.

  8. Radio Announcements • Rules placed responsibility on workers to request OCC to keep train operators apprised of their presence.

  9. Train Speed • Trains were not required to be operated at reduced speeds through work areas. • No requirement for trains to be operated in manual mode which would have given train operators more control.

  10. Job Briefings • Rules and procedures required the person in charge of a work crew to have an understanding with all crew members as to where each person would go to clear the track for vehicle movement.

  11. Job Briefings • No discussion regarding where to clear for trains was held prior to beginning work.

  12. Job Briefings • There was no requirement to conduct a job briefing every time the nature of the work changed or when the number of wayside workers changed.

  13. Actions Taken After Dupont Circle Accident • WMATA issued Special Order 06-05 • Provides for reduced train speeds for stationary workers.

  14. Actions Taken After Eisenhower Avenue Accident • WMATA issued Special Order 07-01 • WMATA issued Special Order 07-02 • WMATA issued Special Order 07-06

  15. Special Order 07-06 • Trains are required to approach work areas at 35 mph, and must reduce speed to 10 mph when wayside personnel are sighted.

  16. Special Order 07-06 • OCC must notify train operators of stationary crew locations at least every 20 minutes.

  17. Special Order 07-06 • Wayside workers must contact OCC after clearing each station/interlocking. • OCC radios new location of wayside personnel to inform train operators.

  18. Special Order 07-06 • OCC is prohibited from moving trains in a reverse route that would cause a train to approach wayside workers from behind.

  19. Memos After Accidents • Track walkers continue to work in pairs with one conducting track inspection and one assigned as train lookout. • Walking track inspections to be performed during non-rush hours. • Rail employees retrained on proper hand signals.

  20. WMATA made revisions in direct response to the specific circumstances of the Dupont Circle and Eisenhower Avenue accidents.

  21. Safety Rules & Compliance Procedures

  22. Quality Checks • Passenger announcements • Door operation • Knowledge of current procedures • Console monitoring • On time performance • Train operations • Uniform • Wayside conditions

  23. Additional efforts to address employee non-compliance with safety rules and procedures.

  24. Technology for Wayside Worker Protection

  25. Technology for Wayside Worker Protection • FTA funding awarded for early alarm system technology. • Early warning alarm technology is presently available.

  26. Technology for Wayside Worker Protection • Cab-mounted unit • System provides train operators with an audible and a visual alarm. • Alerts wayside workers wearing a personal warning device that a train is approaching.

  27. Technology for Wayside Worker Protection • Pilot projects tested on several transit properties • Massachusetts Bay Transportation Authority and Maryland Transit Administration are installing system-wide

More Related