1 / 49

Solar Energy

Solar Energy. Physics 1303. Three forms of solar energy. Passive Solar Active Solar Photovoltaic. Passive Solar Energy. Sensible architectural design Use sun in the winter Avoid in the summer. Cold climates- large glazing which may be insulated at night and opened during the day.

albert
Télécharger la présentation

Solar Energy

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Solar Energy Physics 1303

  2. Three forms of solar energy. • Passive Solar • Active Solar • Photovoltaic

  3. Passive Solar Energy • Sensible architectural design • Use sun in the winter • Avoid in the summer. • Cold climates- large glazing which may be insulated at night and opened during the day. • Hot climates - blocking the sun and providing good ventilation.  

  4. Passive Design Arizona Cliff Dwelling is an example of traditional low-tech solution to space heating and cooling needs.

  5. Passive Design This is a modern New Mexico version. There is movable isolation to put in place at night.

  6. Passive Design Another interesting design. The wall is down and the passive collector is collecting solar energy

  7. Passive Design In this mode, the wall is up and the building is storing solar energy or blocking summer heat gain.

  8. An innovative passive design Roof Pond House in Atascadero, California

  9. Active Solar Energy • Use pumps and solar collectors to provide energy. • Two types of solar collectors: • flat plate • concentrating

  10. Flat Plate Collector • Made of a black absorbing plate with water running through it or air blowing past it. • Usually a flat plate collector has a glazing to stop heat from escaping. • Efficiency 50% or better.

  11. Flat Plate CollectorHot Water Heater Low cost heater in the roof of this modest Miami house

  12. Flat Plate CollectorHot Water Heater Low cost heater in the roof of this modest San Antonio house

  13. Flat Plate CollectorHot Water Heater • Solar water heater system has four components: • Collector • Tank • Pump • Controller

  14. Flat Plate Collector Flat Plate Collector components: • Plate with tubing • Insulation • Glazing

  15. Concentrating Collector • A concentrating collector includes some kind of lens or mirror. • Tracks the sun. • High temperature. •  Efficiency near 50%.

  16. Concentrating Collector Components: • Optics • Glazing • Absorber • Insulation • Tracking

  17. Concentrating Collector This one uses a mirror and has no glazing

  18. Concentrating Collector Used to be on the roof of the Bell center.

  19. Concentrating Collector This is the solar concentrating collector on the CPS Headquarters building on San Pedro. It runs the air-conditioning system

  20. Flat Plat Collector Problem Let’s work a problem

  21. Solar Hot Water Heater

  22. Flat Plate Collector Problem A flat plate solar collector is used as a solar hot water heater. The collector area equals 20 square meters. The collector is located in a location with annual average daily solar insolation equal to 5.0 kWh/square meter/day.

  23. 1.  Calculate the amount of solar energy incident on this collector each day.  Solar Energy = = 5.0 kWh / sq m / day • 20 sq m = 100 kWh / day

  24. Assuming that the efficiency of the solar collector and the rest of the system equals 50%, calculate the average daily energy produced (as hot water) by this system. Express your answer in kWh/day. Average Produced Energy/day = = 100 kWh / day • 0.50 = 50 kWh / day

  25. 3.  Calculate the amount of energy produced by this system each year. Express your answer in kWh. Annual Energy Production = = 50 kWh/day • 365 day/year = 18,000 kWh / year

  26. 4. Assuming that the solar energy replaces the heating of hot water by electric energy and that electric energy cost 10¢/kWh, calculate the yearly savings in electricity costs as a result of using the solar hot water system. Express your answer in $/year. Money Saved = = 18,000 kWh • $0.10/kWh = $1,800 / year

  27. 5. Suppose this solar hot water system were to cost $5,400 (installed). Calculate the payback period for this system Payback = Cost / Savings = $5,400 / $1,800 /year = 3 years

  28. Photovoltaics • Photovoltaic systems convert solar energy directly into electricity. They have efficiencies near 10%.

  29. Photovoltaics PV-powered airplane. Is this really a good idea?

  30. Photovoltaics PV arrays are widely used for low power loads.

  31. Photovoltacis A PV array is made up of several panels and a panel is made up of several cells.

  32. Photovoltaics A complete system has an array, a battery, an inverter and a load. The system can supply either DC or AC loads.

  33. Photovoltaics The inverter converts the DC voltage from the PV array into an AC signal to power AC loads or to connect to the grid.

  34. Photovoltaics • Laurel Kaesler and Frank Ehman designed and built the PV Project in the Physics Department

  35. Photovoltaics • The PV project has 4 components: • Array • Controller • Battery • Load

  36. Photovoltaic Controller

  37. Photovoltaics • The load is a pair of fluorescent lights that I use in a small 3rd floor lab in MMS

  38. Photovoltaic This is the solar array on the CPS Headquarters building on San Pedro.

  39. Photovoltaic • The output of the array is inverted into an AC voltage and fed back to the grid.

  40. Photovoltaics A high-tech solution is to use PV to capture sunlight as electricity and use the electricity to produce microwaves that are beamed back to earth.

  41. PV Problem Let’s work a PV problem.

  42. Photovoltaic Power System

  43. PV Problem A photovoltaic power system has a collector area equals 100 square meters. The collector is located in a location with annual average daily solar irradiance (insolation) equal to 5.0 kWh/square meter/day.

  44. 1.    Calculate the amount of solar energy incident on this collector each day.   Solar Energy = = 5.0 kWh / sq m / day • 100 sq m = 500 kWh / day

  45. Assuming that the efficiency of the PV array and the rest of the system equals 10%, calculate the average daily energy produced (as electricity) by this system. Express your answer in kWh/day. Average Produced Energy/day = = 500 kWh / day • 0.10 = 50 kWh / day

  46. 3.  Calculate the amount of energy produced by this PV system each year. Express your answer in kWh. Annual Energy Production = = 50 kWh/day • 365 day/year = 18,000 kWh / year

  47. 4. Assuming that the cost of electric energy equals 10¢/kWh, calculate the value of the electricity produced by this system annually. Value of energy or Savings = = 18,000 kWh • $0.10/kWh = $1,800 / year

  48. 5. Suppose this PV system were to cost $27,000 (installed). Calculate the payback period for this system. Payback = Cost / Savings = $27,000 / $1,800 /year = 15 years

  49. Solar Energy Do you think solar energy will able to replace a significant fraction of the energy needs of our society?

More Related