1 / 9

Views of Objects

Views of Objects. GOALS: After this chapter you should be able to: Explain different views of an object Explain how an object can be revolved to illustrate different views. Explain how the idea of a “glass box” can be used to explain views.

alida
Télécharger la présentation

Views of Objects

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Views of Objects

  2. GOALS: After this chapter you should be able to: • Explain different views of an object • Explain how an object can be revolved to illustrate different views. • Explain how the idea of a “glass box” can be used to explain views. • Be able to identify the necessary views of a given object that is to be drawn. • Identify typical objects that usually require only two views. • Be able to sketch three or more views • Be able to place the views correctly on the page.

  3. Every Object is subject to laws of nature. • We live in a three dimensional world. • Therefore there are three essential dimensions that must be represented in a mechanical drawing: • Width • Height • Depth

  4. The front view shows what two dimensions? • Width and height • The right side view shows what two dimensions? • Height and Depth • The top shows what two dimensions? • Width and the depth

  5. Refer to figure 7-5 in your text. The Glass Box. • Hidden Lines: Used to show hidden parts (edges). Drawn with a dashed (hidden) line. The edge would not be visible in the right side view so we use a hidden line to show it is there.

  6. The Right Side, Front and Top views are known as “the Three Standard Views.” • In circular drawings we use center lines to indicate roundness. • Sometimes only two views are required.

  7. One of the worst things you can do is draw a view out of place. • Always use this orientation: TOP FRONT RIGHT SIDE

  8. Line up your views. • Use construction lines for measuring. • Use a 45 degree angle to project measurements from top to right side view.

More Related