1 / 9

Project Redwood Program Review #5

Project Redwood Program Review #5. Advisor Dr. Joseph Hoffbeck, Dr. Peter Osterberg Industry Representative Andrew Owings (Nike). Team Dan Allenby Preston Boyd Kyle Yakubisin Ross Yamaguchi. Overview. Introduction Circuit Diagram Scorecard Plans Issues/Concerns Conclusions.

alphaa
Télécharger la présentation

Project Redwood Program Review #5

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Project RedwoodProgram Review #5 • Advisor • Dr. Joseph Hoffbeck, • Dr. Peter Osterberg • Industry Representative • Andrew Owings (Nike) Team Dan Allenby Preston Boyd Kyle Yakubisin Ross Yamaguchi University of Portland School of Engineering

  2. Overview • Introduction • Circuit Diagram • Scorecard • Plans • Issues/Concerns • Conclusions University of Portland School of Engineering

  3. SpO2 Sensor Analog Signal Processing Circuits MOSIS Chip (Counter, DU, Output Controller) System Clock LED Drivers Seven-Segment Displays Introduction System Block Diagram Of Team Redwood’s Heart Rate Monitor University of Portland School of Engineering

  4. Analog Circuit Diagram University of Portland School of Engineering

  5. Scorecard • March’s Accomplishments: • Finalized construction of prototype including: Display, System Clock, and Analog Circuitry, MOSIS chip • Successfully integrated MOSIS chip • Troubleshoot design flaws • Works of Asians!!! University of Portland School of Engineering

  6. April Plans • Finalize the circuitry positioning in the case & mount the Sp02 female connector • Keep the prototype working properly • Founder’s Day Presentation! • Senior Design Post-mortem University of Portland School of Engineering

  7. Milestones University of Portland School of Engineering

  8. Concerns/Issues • Hope the device is robust enough to last to Founder’s Day (a few diodes have blown out) • We are all very busy, so working as a team is very key to bring this to completion University of Portland School of Engineering

  9. Conclusions • Beginning to see the light at the end of the tunnel • The pieces have come together to make a working prototype • Questions? University of Portland School of Engineering

More Related