1 / 20

DIP_09

DIP_09.ppt. Extractive Distillation Balance PFD Report Heat/Work streams Heat Exchangers Stream properties. Balance. Extraction distillation of the mixture ETOH + WATER (ETGL) using ethyleneglycol (ETGL) as solvent. Property method: NRTL

amora
Télécharger la présentation

DIP_09

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. DIP_09.ppt • Extractive Distillation • Balance • PFD • Report • Heat/Work streams • Heat Exchangers • Stream properties

  2. Balance Extraction distillation of the mixture ETOH + WATER (ETGL) using ethyleneglycol (ETGL) as solvent. • Property method: NRTL • Stream 1: 20ºC, 1bar, 60 kmol-ETOH/h, 40 kmol-WATER/h • Stream 2: boiling point, 1 bar, 30 kmol-ETGL/h • Column D-110: 40 stages, RR=1.8; stream 1 -> stage 35, stream2 -> stage 4. • Column D-120: 99.9% recovery. • Results forms: flows and mole fractions.

  3. /Setup /Report Options: Stream Fraction basis, Mole ON • Components: ETOH, WATER, ETGLICOL • /Properties /Specifications: Global Base method NRTL • Stream 1: 20ºC, 1bar, 60 kmol-ETOH/h, 40 kmol-WATER/h • Stream2: V=0, 1 bar, 30 kmol-ETGL/h • Column D110: RADFRAC; Nt=40, Convergence=Azeotropic, D=60 kmol/h, RR=1.8; stream 1 -> stage 35, stream2 ->etapa 4, P=1 bar. • Column D120: DSTWU; RR=-1.1, LK: WATER 0.999, HK: ETGL 0.001, P=1 bar. DestExtrac_01.apw

  4. Stream 6 must be recycled to stream 2. The software doesn’t allow direct specifications for intermediate streams (stream 7). A Design Specification, a Calculator block or a Balance block must be used to calculate the make-up stream (stream 2) .

  5. Modify the PDF • Balance block: • /Flowsheeting Options /Balance /New: B-1 /Flowsheeting Options /Balance /B-1: Equations /Flowsheeting Options /Balance /B-1: Calculate DestExtrac_02.apw

  6. Results: Control Panel:

  7. PFD • /View /PFD Mode (F12) • [Right-click] /Page Brake Preview (F2) • [Right-click] /Reset Page Breaks (Shift+F2) • Streams table: /Results Summary /Streams [Stream Table] (NOTE: to view the table activate the Global Data option: Menu View: Clobal Data ON) • Move streams, add blocks, etc... : changes are not incorporated to simulation, only to drawing. • /View /Reset PFD mode (Shift+F12) • File /Page Setup: split the drawing in multiple pages.

  8. Report • Contents: /Data /Setup /Report Options • Generate: /File /Export: TYPE=Report Files (*.rep) • View with Notepad or Microsoft Word.

  9. Compare Report extension after adding Property options: ‘All physical property parameter used (in SI units)’ and ‘Property parameters’ descriptions, equations and source of data’. • From 14 to 55 pages!!

  10. Also the interface may be used to see the value of parameters. • /Tools /Retrive Parameter Results • Results in /Properties /Parameters /Results

  11. Heat/Work streams Heat from D-110 condenser may be used to preheat feed stream. • Modify the PFD: add heater E-130, stream 8 and heat stream Q-E130 • Heater E-130: P=0.

  12. The energy balance is correct, but the stream 8 is heated up to 348ºC, when the condenser operates at 78ºC. Caution with thermal levels. DestExtrac_03.apw

  13. Cool the liquid distillate stream from D-110 and use that heat to preheat the feed stream. • Modify the PFD: add heater E-130H. Change Q-E130 source to the new heater. • E-130H: P=0 and T=40ºC • Run

  14. 0.076 106 kcal/h 78ºC 40ºC 20ºC 49.3ºC DestExtrac_04.apw

  15. Cool now the liquid water product stream and use the heat to preheat the feed stream again. • Add heaters E-140C and E-140H. Add the stream Q-E-140, from E-140H to E-140C. • May stream 5 be cooled down to 40ºC?

  16. E-140C: P=0 • E-140H: P=0, T=59.3ºC (the cold stream, 8, is at 49.3ºC, then, assuming a minimum ΔT=10ºC, the maximum cooling in stream 11 will be 59.3ºC). 49.3ºC 60.0ºC 98.7ºC 59.3ºC 0.029 106 kcal/h DestExtrac_05.apw

  17. Heat Exchangers The last step is to replace two Heaters for a heat exchanger (HeatX). Although coefficients may be calculated according to geometry, a rough estimate will be better used. Modify the PFD: exchange Heaters E-140C and E-140H by Heatx E-140.

  18. Speficify minimun ΔTmín= 10ºC at hot stream outlet. Results.... DestExtrac_06.apw

  19. Stream properties 1. Select a stream 2. /Tools /Analysis /Stream 3. Point 4. Mole, Thermodynamic Properties Go

  20. Another example .... 3. Bubble/Dew Go

More Related