1 / 5

Comprehensive Report on Engineering Revision Gaps and Mismatch Conditions

This document outlines the engineering revisions (REV A to REV D) for various components such as 478Z115-7, 471Z1208-9, and 478Z1508-5, detailing the conditions of mismatches, gap measurements, and assembly instructions. It includes acknowledgments of previous conditions that no longer exist after further assessments. Additionally, work completed on multiple components (CS280, CS260) is recorded, noting elongated and misaligned holes, and gaps between parts. Each change and update is documented systematically for clarity and reference.

anahid
Télécharger la présentation

Comprehensive Report on Engineering Revision Gaps and Mismatch Conditions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. AC90 – IN WORK CS297 NC 1900590 – REV A -[478Z0100-11] GAP on JD60 (478Z115-7 & 471Z1208-9 & 478Z1508-5) & JD 63 (478Z115-7 & 471Z1208-9) NC 1900590 – REV B – “REV A” condition went away. Now mismatch 471Z1208-9 & 473Z5100-3 (skin) [470Z1008-5] JD1.662, JD39.175, JD40.664 NC 1900590 – REV C – “REV B” Superseded. Measure Gap between 478Z115-7 & 471Z1208-9 Measure Gap between 471Z1208-9 & 473Z5100-3 (skin) NC 1900590 – REV D – Disassemble 478Z115-7 & 471Z1208-9 & 478Z1508-5 & 478Z1508-1 NC 1900590 – REV E – Re assemble.

  2. AC91 – IN WORK CS297 NC 1918046 – REV A – Riding – 471Z1208-9 & 478Z1508-5 ER 2006757 -478Z1508-5 PU 2007004 – FOD between shim and 478Z1508-5 NC 2007045 - AC92 – No NC’s. Work Completed on CS260. AC93 – Work Completed on CS297 NC 2008471 REV A- JD58 Oblong Hole (478Z115-7 & 478Z1508-5) NC 2008581 REV A- Misaligned Holes JD62(478Z115-7 & 478Z1508-1) JD 63(478Z115-7 & 471Z1208-9 & 478Z1508-1) JD 64 (471Z1208-9 & 471Z1108-3 & 478Z1508-1 JD 65(471Z1108-3 & 478Z1508-1) NC 2008581 REV B – Obtaining synthetic part

  3. AC94 – IN WORK CS297 NC 1955827 – REV A- GAP 471Z1208-9& 478Z1115-7 NC 1955827 – REV B- “Rev A” Created GAP 60-5, 63-5, 60-4, 63-2 JD60 (478Z115-7 & 471Z1208-9 & 478Z1508-5) JD 63 (478Z115-7 & 471Z1208-9 & 478Z1508-1) NC 1955827 – REV C- Ream JD60-1 to -5and JD 63-1 to -5 NC 1955827 – REV D- “Rev C” Created Mismatch 478Z1508-5 & 478Z1115-7 JD58-1 thru -5 AC95 –Work Completed on CS280. PU 2008969 – Elongated Hole JD65 (478Z1508-1 & 478Z1508-1 )

  4. AC96 – IDLE AC @ CS295 No NC’s. AC97 – Work Completed on CS280 NC 2034029 Rev A- Oversize Hole JD60 (478Z115-7 & 471Z1208-9 & 478Z1508-5) & JD61 (471Z1108-3 & 471Z1208-9 & 478Z1508-5) AC98 –Work Completed on CS280. NC 2009540 REV A- GAP JD58 (478Z115-7 & 478Z1508-5) NC 2009540 REV B – “REV A” Condition no longer exist. AC99 – No NC’s. Work Completed on CS260.

  5. AC100 – IDLE AC @ CS280 as of 10/19 NC 2060297 Rev A – Elongated Holes JD60 (478Z115-7 & 471Z1208-9 & 478Z1508-5) AC101 – IDLE AC @ CS270 as of 10/19 NC 2046928 REV A - [470Z1008-5] JD39.175, JD40.664 Mismatch 471Z1208-9 & 473Z5100-3 (skin) Cancelled, condition did not exist. NC 2052444 REV A- JD65 Hole Angularity 478Z1508-1 & 478Z1508-1 AC102 – No NC’s. Work Completed on CS260.

More Related