1 / 6

Preparing Dried Blood Spot (DBS) Cards for PNG

Preparing Dried Blood Spot (DBS) Cards for PNG. Preparation of DBS Cards. Pipette 25 m L of blood from Microtainer onto each circle on the DBS card. If blood is left after circles have been filled, use the spaces next to each circle to pipette the rest of the blood.

anahid
Télécharger la présentation

Preparing Dried Blood Spot (DBS) Cards for PNG

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Preparing Dried Blood Spot (DBS) Cards for PNG

  2. Preparation of DBS Cards • Pipette 25 mL of blood from Microtainer onto each circle on the DBS card. If blood is left after circles have been filled, use the spaces next to each circle to pipette the rest of the blood. • Do not allow the spots to overlap each other or the straight lines on the card.

  3. Drying of DBS Cards • Open the DBS box and set it on end. Place the filled DBS card into the slots so that the card lies horizontally. Do not let the card touch other cards in the box. • Set the fan up ~20 centimeters (~8 inches) from the open box and allow the breeze to blow across the cards. Allow to dry for approximately 10 minutes before closing and transporting the box.

  4. Working with the DBS Cards • Dried blood spots should be completely dry before packing. • Stack dried blood spots with weighing paper between the cards.

  5. Storing the DBS Cards • Pack dried blood spots in low gas-permeable bags. • Add desiccant packs and Humonitor card. • Check the Humonitor card each evening, and replace it and the desiccant packs if any of the Humonitor card spots are turning pink.

  6. Monitoring/Changing the DBS Box • If the DBS box starts to fall apart, take the wooden inserts out and insert them into a new DBS box (broken down in Ziploc bags) • Humidity monitor can be used (keep probe in DBS box when closed) to monitor metal desiccant box. Metal box can be used again after the moisture has been driven out by heating.

More Related