1 / 10

Butler Regional Interoperable Communications System

Butler Regional Interoperable Communications System. Mobile Radio Training. Butler County, Ohio User training for Fire / EMS dispatched by the Butler County Sheriff’s Office. LED Status. A SO FD MAIN. ZNUP. ZNDN. PROG. VIEW. SCAN. RED. YELLOW. GREEN. XMIT LED: Solid

anastasia-owens
Télécharger la présentation

Butler Regional Interoperable Communications System

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Butler Regional Interoperable Communications System Mobile Radio Training Butler County, Ohio User training for Fire / EMS dispatched by the Butler County Sheriff’s Office

  2. LED Status A SO FD MAIN ZNUP ZNDN PROG VIEW SCAN RED YELLOW GREEN • XMIT LED: • Solid • PTT is pressed, radio is transmitting • Flashing • Radio is trying to access the system • BUSY LED: • Flashing • Conventional channel busy (Private Line) • BUSY LED: • Solid • Self-test being performed • Flashing • Incoming Private Call

  3. Radio On or Off General Radio Features Volume Knob A SO FD MAIN ZNUP ZNDN PROG VIEW SCAN Power Button • Turn Radio On: • Press the Power button on the control unit. • The radio then performs a self check. • Turn Radio Off: • Press the power button on the control unit. Notes: If FAIL ##/## appears in the display, the radio will not function until the condition has been corrected. If any problem occurs, the display shows an error code ERROR ##/##.

  4. Display Brightness General Radio Features Dimmer Button A SO FD MAIN ZNUP ZNDN PROG VIEW SCAN • Press the Dimmer button to change the display brightness to one of four levels. • Off to high • High to medium • Medium to low • Low to off • If OFF is selected, both the display light and the • backlight will be turned off (used for surveillance • operations), but the display will remain active.

  5. Home Mode Select General Radio Features A SO FD MAIN Home Button ZNUP ZNDN PROG VIEW SCAN Press . This selects SO FD MAIN from any other zone and talkgroup in the radio.

  6. Zone Select or Change Home Button General Radio Features Zone Letter A SO FD MAIN TG Name ZNUP ZNDN PROG VIEW SCAN A zone is a grouping of modes/channels. To Select a zone: • Press the PTT button to begin transmitting on the displayed zone and mode. • Press either or to scroll to the ZONE softkey. • Press below ZONE. • The display shows the current zone and mode. • Press either or until the desired zone is displayed. • Press or the PTT button to save the displayed zone as the new home (default) zone. • The zone name stops flashing once it is saved. Note: If you select a zone that is out of range, you will hear a low-pitched tone. Select a different zone.

  7. Transmit (Trunked Modes) General Radio Features A SO FD MAIN ZNUP ZNDN PROG VIEW SCAN To Transmit on a Trunked Mode: • If you hear a continuous low-pitched tone, you are out of the system's range. The red XMIT indicator may flash several times as the radio tries to access the system. • Release the PTT button and try again when the vehicle is within range of the system. • Release the PTT button to receive. • Lift the microphone off-hook. Press and hold the microphone PTT button. • If you hear three quick tones (callback tones) and the red XMIT (transmit) indicator lights steadily, proceed with your message. • If you hear a busy tone and the yellow Busy indicator flashes, all trunked channels are in use. • Release the PTT button and wait for the three quick tones. Within three seconds of hearing these tones, press and hold the PTT button to transmit your message.

  8. Emergency Alarm and Call (Initiate) General Radio Features EMERGENCY ZNUP ZNDN PROG VIEW SCAN Emergency Button If the radio has both emergency call and alarm features, it automatically proceeds to the call mode after the alarm is acknowledged. To Initiate an Emergency Alarm and Call: • Press the PTT button and announce your emergency. • To exit from the emergency state altogether, press and hold the emergency button until a tone sounds. • The alternating EMERGENCY display disappears, and the radio returns to normal operation. Your radio will now return to its selected talkgroup, if different from SO FD MAIN. • Press the Emergency button to activate the emergency call/alarm feature. • The display begins alternating EMERGENCY with the current zone/channel. • For trunking modes: four high-pitched tones indicate that the alarm has been received by the trunked system’s central controller. • Your radio automatically reverts to SO FD MAIN for the alarm, even though the display shows your originally selected talkgroup (if different). Note: Turning the radio off also cancels the emergency state. Interactive Procedure

  9. Scan List ProgrammingAdd Mode to Scan List Home Button General Radio Features A SO FD MAIN ZNUP ZNDN PROG VIEW SCAN To add a mode to the scan list: Note: If a scan list is full, you will hear a bad-key chirp each time you press below SEL, and the desired channel will not be assigned to the list.

  10. Scan List ProgrammingDelete Mode from Scan List General Radio Features A SO FD MAIN ZNUP ZNDN PROG VIEW SCAN Channel Knob To delete a mode from the scan list:

More Related