1 / 19

Scaling and Alternative Views

Scaling and Alternative Views. Lecture 5. Topics For Today. Scales and Scaling Alternate Views AutoCAD 2D Lesson 3 Construction and Editing Tools Quiz – Multi-view and pictorial drawings. Scaling a Drawing.

anthonyrmartinez
Télécharger la présentation

Scaling and Alternative Views

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Scaling and Alternative Views Lecture 5 Autumn Quarter

  2. Topics For Today • Scales and Scaling • Alternate Views • AutoCAD 2D Lesson 3 • Construction and Editing Tools • Quiz – Multi-view and pictorial drawings Autumn Quarter

  3. Scaling a Drawing • Scaling a drawing is a process for making an object fit the dimensions of the display media • Scales are tools convenient to use when creating a drawing with a standard scale (conversion factor) Autumn Quarter

  4. Types of Scales • Architect’s • A measurement = 1’ 0” typically, divisions are feet and inches • Civil Engineer’s • 1” = 10’s of feet, divisions are 0.1’ • Mechanical Engineer’s • Some unit – 1” Autumn Quarter

  5. Three Common Types of Scales Architect’s Civil Engineer’s Mechanical Engineer’s Scales Scales Scales Full size 1” = 0’1” 1” = 10.0’ 2” = 1” Quarter size 3” = 1’-0” 1” = 20.0’ 1 ½” = 1” One-eighth 1½” = 1’-0” 1” = 30.0’ 1” = 1” One-twelfth 1” = 1’-0” 1” = 40.0’ 3/4” = 1” 1/2” = 1’-0” 1” = 50.0’ 1/2” = 1” 3/8” = 1’-0” 1” = 60.0’ 1/4” = 1” 1/4” = 1’-0” 1” = 80.0’ 1/8” = 1” 3/16” = 1’-0” 1” = 100.0’ 1/8” = 1’-0” 3/32” = 1’-0” Autumn Quarter

  6. Architect’s Scale –Major Unit = 1 foot Divisions = inches Civil Eng. Scale –Major Unit 1 inch = 10’s of feet Divisions = tenths Mech. Eng. Scale –Major Unit = 1 inch Divisions = fraction of an inch Autumn Quarter

  7. Example Uses Autumn Quarter

  8. Types of Scales by Construction Autumn Quarter

  9. Type of Scale by Presentation Open-divided Full-divided Autumn Quarter

  10. Your Scale Autumn Quarter

  11. Conventional and Alternative View Arrangements • Review of “Conventional” Arrangement • Demonstration of “Alternative” Arrangement for Right Side View Autumn Quarter

  12. Convention on Labeling of Views Autumn Quarter

  13. Conventional Arrangement of Views Autumn Quarter

  14. Unfolding of Coordinate Planes - Conventional Autumn Quarter

  15. Alternate Arrangement of Views for the Right Side Autumn Quarter

  16. Alternative Arrangement Views Autumn Quarter

  17. Today’s AutoCAD Project (2D #3) Autumn Quarter

  18. Remember – Use A Title Block • STEPS • Complete the drawing • Go to Layout 1 • Click OK when the window pops up • Use the Insert Command [INSERT] • Select the file “TITLE BLOCK” • Select Explode the Title Block (so you can edit) • Use the Edit Command to change the text [ED] Autumn Quarter

  19. Today’s Assignment • Dwg 9 – Lesson 3, Exercise 3 (page 3-20) • Note that Dimensions are in Millimeters • Save as BRACKET • Due at end of class today • Dwg 10 – ML-1 • Missing Line Problems with pictorials • Use Multi-view Sketch Paper and/or Isometric Sketch Paper • Due at beginning of the next lecture Autumn Quarter

More Related