1 / 10

Forming Machines

This guide provides crucial information about the safe operation and usage of forming machines in metalworking. Learn about the forge for heating ferrous metals to a red-hot temperature using an anvil and blacksmith's hammer. Safety tips include keeping the lid open when lighting the forge and shutting off gas when done. Additionally, discover best practices for using a crucible furnace for non-ferrous metals and a ring roller for shaping metal. Prioritize safety and efficiency with these essential guidelines.

aquene
Télécharger la présentation

Forming Machines

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Forming Machines Foldable Information

  2. Anvil • Blacksmith’s Hammer • Ferrous Metals Related Terms Forge

  3. Used to heat up ferrous metal to a red hot temperature. • The metal can then be shaped using the anvil and blacksmith’s hammers. Uses Forge

  4. Always make sure the lid is open before lighting. • Stay away from opening when lighting. • Always shut the gas and air off when shutting down the forge. • Be aware of where the hot metal is at all times. Safety Rules Forge

  5. Non-ferrous metals • Ingots • Oil Bonded Sand Casting Related Terms Crucible Furnace

  6. Used to melt non-ferrous metal that will be cast into a mold. Use Crucible Furnace

  7. Always have the lid open when lighting. • Always keep any moisture away from the molten metal. • Only instructor may fill the furnace or pour the molten metal. • Turn off the gas and the air when shutting down the furnace. Safety Rules Crucible Furnace

  8. Sheet metal (slip rolls) • Round or square bar (ring roller) Related Terms Ring Roller

  9. Used to roll metal into a cylinder, cone or ring. Uses Ring Roller

  10. Keep fingers away from moving parts. • Do not overload the machines with to thick of a material. • Increase amount of curve over several passes. Safety Rules Ring Roller

More Related