1 / 9

Install OS X with the Kalyway Install Disc

Install OS X with the Kalyway Install Disc. Set Your BIOS.

arama
Télécharger la présentation

Install OS X with the Kalyway Install Disc

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Install OS X with the Kalyway Install Disc

  2. Set Your BIOS

  3. Floating around the BitTorrents, you'll find a disc image called something like Kalyway Leopard 10.5.1 SSE2 SSE3. Download it and burn it to a DVD—it's what you'll use to install Leopard. If you're going to pursue this I'd still recommend purchasing an actual copy of Leopard, but you won't need it here. Basically this DVD contains the Leopard install disc along with the EFI software that lets your hardware work with OS X using the vanilla kernels—which is a big part of why you don't have to do any of the command line hacking this time around. You just install the disc and voilà—everything boots up and upgrades normally (or at least that's been my experience so far). So assuming you've built your computer using the original instructions, you've got the Kalyway disc, and you've already prepared your BIOS, you're ready to install.

  4. First, boot with the disc. The disc boot up can take a few minutes, so you'll need to be patient.

  5. Before you go ahead with the installation you need to format your hard drive, so once the disc boots, go to Utilities -> Disk Utility in the menu bar. Find the hard drive in the sidebar you want to install Leopard to, select it, then go to the Partition tab, and select a 1 partition volume scheme, name it whatever you want (I called mine Leopard), and choose the Mac OS Extended (Journaled) format. Now click the Options button to set the partition scheme. You can choose the partition scheme as either Master Boot Record or GUID (in my previous instructions you needed to set it as MBR). I used GUID.

  6. Click Apply, let it complete the partitioning, and then quit Disk Utility and head back to the Installer. Hit Continue at the Welcome screen, agree to the terms, and then be sure to hit the Customize button before proceeding with your installation. Here's where the point-and-click magic of this installer comes in.

  7. This install package comes with individual settings that match specific motherboards, and one very well supported board is the P5W DH Deluxe I used in the original build. Rather than telling you which checkboxes to tick, just click the screenshot above for a look at all the settings you'll want to use if you're installing OS X on that board. When you're all set, click Done and then go ahead and Install. When the installation is complete (it'll take a little while), let your computer restart, pop out the install disc, and sit back in wonder as Leopard runs on your PC in full 10.5.1 glory

  8. Thank You Rayker C. Bulan

More Related