1 / 76

Supervied by : Dr. Monther Dwaikat Prepared by: Haneen Ghanem Lama Droobi Rana Faris

Al-Najah National University Engineering Faculty building Engineering Department Graduation Project: Complex of Ministries. Supervied by : Dr. Monther Dwaikat Prepared by: Haneen Ghanem Lama Droobi Rana Faris. Chapter One : Introduction. Complex of Ministries. Site Description.

arav
Télécharger la présentation

Supervied by : Dr. Monther Dwaikat Prepared by: Haneen Ghanem Lama Droobi Rana Faris

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Al-Najah National University Engineering Facultybuilding Engineering DepartmentGraduation Project:Complex of Ministries Supervied by : Dr. Monther Dwaikat Prepared by: Haneen Ghanem Lama Droobi Rana Faris

  2. Chapter One : Introduction Complex of Ministries

  3. Site Description

  4. Site Description

  5. Comparing Due to Solar Exposure

  6. Comparing Solar Exposure Value`s

  7. PROJECT A

  8. PROJECT B

  9. PROJECT B

  10. Sun path in winter for project A

  11. Sun path in summer for project A

  12. Sun path in winter for project B

  13. Sun path in summer for project B

  14. Comparing Solar Exposure Value`s

  15. Daylight :

  16. Ground Hole Section

  17. Parking Design

  18. Parking Design

  19. Elevators Design

  20. Architectural Design Plans : Ground Floor

  21. Architectural Design Plans :5th and 6th Floor

  22. Architectural Design Plans : 7th Floor

  23. Architectural Design Plans : 2nd basement Floor

  24. East Elevation

  25. Nouth Elevation

  26. West Elevation

  27. South Elevation

  28. Section A-A

  29. Section B-B

  30. structural design The structural design was made by SAP program 3D modeling

  31. MinistryofTradeandEconomy Typical Plan Building 3D Model

  32. Codes: The structures are designed using practice code and specifications that control the design process and variables. The following codes and standards are used in this study: * ACI 318-08: American concrete institute provisions for reinforced concrete structure design. *UBC-97: code which is used here for seismic load parameters determination .

  33. Structural element: • Design will include the following elements : • 1) slab ( one way rib slab). • 2) beam ( main beam & secondary beam) . • 3) column . • 4) footing

  34. Design data: 1- Compressive strength of concrete (f\c) • beams • shear walls • columns • Footing • slabs 2- Yielding strength of steel (fy), 3- Bearing capacity of soil= f\c =400 kg/cm2 fy =4200 kg/cm2 4 kg/cm2

  35. Material :

  36. Preliminary Design: Beam thickness Main beam→ (60*50) cm Hidden beam→ (30*50) cm External beam→ (60*30) cm Column dimension G1 → d= 90 cm G2→ (40*40) cm G3→ (50*50) cm G4 → (55*55) cm G5 → (60*60) cm G6 → (70*70) cm G7 → (80*80) cm Slab thickness

  37. Loads : • Superimposed dead load=4.5 kN/m² • Superimposed dead load for carrage=2.5 kN/m² • Live load =5 kN/m²

  38. Check for sap model : • Compatibility check

  39. Check for sap model : Check equilibrium

  40. Check for sap model : local equilibrium (internal force )

  41. DynamicDesign: • Soil type Sc • Z = 0.2 • C v=0.32 • Ca =0.24

  42. Design: Design slab

  43. Design: Beams design

  44. Design: Column design

  45. Design: Column design

  46. Design: footing design

  47. Desing :

More Related