20 likes | 146 Vues
This overview examines essential fire safety upgrades for modern buildings, focusing on the importance of stainless steel escalators, advanced water pumping systems, and updated building codes. It discusses the installation of thermal imaging cameras for heat detection, improved sprinkler systems, and the necessity of proper exits, even in the presence of revolving doors. Further innovations include the use of fire-resistant materials and the strategic placement of hoses and fire hydrants. Ensuring these features not only enhances safety but also prepares structures for emergencies.
E N D
Escalator (wood, grease) • One of: stainless steel escalators, cleaned mechanisms, sprinklers installed, smoke and fire alarms, smoking bans. • Pump (water pump) a) Bakery b) 1 c) 4 days (& nights) d) 3/5ths • One of: (new building codes, wood was replaced with fire resistant plaster & brick, better water system, holes were precut in wooden water mains, removable plugs, above ground, fire plug – fire hydrant). • Hose • Steam powered fire engine /10
For more lessons, visit www.chalkbored.com /10 /20 • 35 • Heat sensing visors (thermal imaging camera and sensors). • 4 minutes • 146 • One of: life safety code introduced, building codes changed, building exit code). • Better exits (doors that open out even if a revolving door is present). • One of: power went out, low water pressure. • Pipes terminate with coverconnected with solder that melts at 150 degrees. (anything) • Long ledges (or balconies). • Check exits, sprinklers, lower than 7th floor.