1 / 12

Anglicky v odborných předmětech "Support of teaching technical subjects in English “

Anglicky v odborných předmětech "Support of teaching technical subjects in English “. Tutorial : Engineering technology Topic : Marking of welds on drawings Prepared by: Ing. Josef Martinák st. Projekt Anglicky v odborných předmětech, CZ.1.07/1.3.09/04.0002

arden
Télécharger la présentation

Anglicky v odborných předmětech "Support of teaching technical subjects in English “

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Anglicky v odborných předmětech"Support ofteachingtechnicalsubjects in English“ Tutorial: Engineering technology Topic: Markingofwelds on drawings Prepared by: Ing. Josef Martinák st. Projekt Anglicky v odborných předmětech, CZ.1.07/1.3.09/04.0002 je spolufinancován Evropským sociálním fondem a státním rozpočtem České republiky.

  2. Marking of welds on drawings

  3. Marking of welds on drawings ČSN EN 22553

  4. Basic types of welds in accordance to cross section

  5. Marking 135/EN ISO 58179 • Left of the mark – main weld’s dimension • Right of the mark – weld length dimension

  6. Size of corner welds

  7. Marking of butt weld • Example: • a 4 ⊿ 40 x 50 (500) • a = weld thickness • 4 = weld size (4 mm) • ⊿ = marking • 40 = number of welds (seams) • 50 = length of welds (50 mm) • (500) = gap between welds

  8. Preparation of weld connections ČSN EN ISO 9692-1

  9. Welding location ČSN EN ISO 6947

  10. Description of multiple layer weld

  11. Advantages of welding • Weld can have arbitrary shape • Weld joint is dismountable • Disadvantage of welding • For some metals welding is difficult

  12. Used literature • DILLINGER, Josef. A KOL. Moderní strojírenství pro školu i praxi. 1. Praha: Europa-Sobotáles, 2007. ISBN 978-80-86706-19-1. • M. HLUCHÝ, J. KOLOUCH, R. PAŇÁK. Strojírenská technologie II

More Related