1 / 24

Application of Ethernet Powerlink for Communication in a Linux RTAI Open CNC system

Krystian Erwi´nski , Marcin Paprocki , Lech M. Grzesiak , Senior Member, IEEE , Kazimierz Karwowski, and Andrzej Wawrzak. Application of Ethernet Powerlink for Communication in a Linux RTAI Open CNC system. 9933252 林煜翔. Introduction Multiaxis CNC System Proposed Solution

arden
Télécharger la présentation

Application of Ethernet Powerlink for Communication in a Linux RTAI Open CNC system

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. KrystianErwi´nski, MarcinPaprocki, Lech M. Grzesiak, Senior Member, IEEE, Kazimierz Karwowski, and Andrzej Wawrzak Application of Ethernet Powerlink forCommunication in a Linux RTAIOpen CNC system 9933252林煜翔

  2. Introduction Multiaxis CNC System Proposed Solution Experimental Setup and Test Results Conclusion References Outline 9933252林煜翔

  3. CNC：Computerized numerical control Standalone controllers Utilize PCs Ethernet Powerlink(EPL) Ethernet fieldbus Introduction 9933252林煜翔

  4. Realtime Nonrealtime Real time ： V x T = S 9933252林煜翔

  5. PC-based open CNC mutiaxis machine system with EPL PC-RTOS CNC controller Low cost Flexibility Ease of implementation In This Paper 9933252林煜翔

  6. Achieve the best possible time determinism available to a purely software solution. Linux Real Time Applocation Interface (RTAI) Enhanced machine controller 2 Main Goal 9933252林煜翔

  7. Structure 9933252林煜翔

  8. A line network topology PC is the first node Structure - EPL 9933252林煜翔

  9. Synchronously Priority G Code Interpolation PC-Based CNC Controller 9933252林煜翔

  10. PC-Based CNC Controller 9933252林煜翔

  11. Standard Ethernet： Packet collision Object dictionary (OBD) EPL Data Link Layer Network management (NMT) EPL Communication Module 9933252林煜翔

  12. One master managing node (MN) Slave controlled nodes (CN) EPL Communication Module 9933252林煜翔

  13. Start of cycle Poll request Poll response Start of asynchronous cycle Asynchronous send EPL Communication Module 9933252林煜翔

  14. Shared memory buffers were replaced by direct function calls to improve performance Linux kernel functions were replaced by their RTAI counterparts The network interface driver was modified to use RTAI interrupts RTAI timers were utilized instead of Linux ones Proposed solution 9933252林煜翔

  15. Unnecessary devices and device drivers were disabled. the network interface card was assigned an interrupt with as high priority as possible. network card interrupt was assigned only to the real-time core via the interrupt request affinity kernel system call. Proposed solution 9933252林煜翔

  16. Test Results

  17. Test Results

  18. Time-stamp counter (TSC) 64-bit counter Running at the processor frequency (2.33 GHz) Measuring EPL cycle jitter – 1ms Test Results

  19. Test Results

  20. Low-cost Flexible Purely software CNC system that can utilize various commercially available servo drives CONCLUSION

  21. A. Malinowski and H. Yu, “Comparison of embedded system design for industrial applications,” IEEE Trans. Ind. Informat., vol. 7, no. 2, pp. 244–254, May 2011. E. Monmasson, L. Idkhajine, M. N. Cirstea, I. Bahri, A. Tisan, and M. W. Naouar, “FPGAs in industrial control applications,” IEEE Trans. Ind. Informat., vol. 7, no. 2, pp. 224–243, May 2011. G. Y. Gu, L. M. Zhu, Z. H. Xiong, and H. Ding, “Design of a distributed multiaxismotion control system using the IEEE-1394 bus,” IEEE Trans. Ind. Electron., vol. 57, no. 12, pp. 4209–4218, Dec. 2010. J. Jasperneite, J. Imtiaz, M. Schumacher, and K. Weber, “A proposal for a generic real-time Ethernet system,” IEEE Trans. Ind. Informat., vol. 5, no. 2, pp. 75–85, May 2009. K. Kim, M. Sung, and H.-W. Jin, “Design and implementation of a delayguaranteed motor drive for precision motion control,” IEEE Trans. Ind. Informat., vol. 8, no. 2, pp. 351–356, May 2012. H. Carlsson, B. Svensson, F. Danielsson, and B. Lennartson, “Methods for reliable simulation-based PLC code verification,” IEEE Trans. Ind. Informat., vol. 8, no. 2, pp. 267–278, May 2012. T. Harmon, M. Schoeberl, R. Kirner, R. Klefstad, K. H. K. Kim, and M. R. Lowry, “Fast, interactive worst-case execution time analysis with back-annotation,” IEEE Trans. Ind. Informat., vol. 8, no. 2, pp. 366–377, May 2012 REFERENCES

  22. C. Shuxin and A. Bin, “Time performance research on field bus based CNC system,” in Proc. 2nd ICMEE, Beijing, China, Aug. 1–3, 2010, vol. 2, pp. 56–59. H. Chaobin, L. Wanli, and X. Wuquan, “Study on the CNC system interpolation based on windows CE.NET and its real-time,” in Proc. Int. Conf. CMCE, Aug. 24–26, 2010, vol. 2, pp. 110–112. D. Yashiro and K. Ohnishi, “Performance analysis of bilateral control system with communication bandwidth constraint,” IEEE Trans. Ind. Electron., vol. 58, no. 2, pp. 436–443, Feb. 2011. M. M. H. P. van den Heuvel, R. J. Bril, and J. J. Lukkien, “Transparent synchronization protocols for compositional real-time systems,” IEEE Trans. Ind. Informat., vol. 8, no. 2, pp. 322–336, May 2012. T. Gao, D. Yu, D. Vue, and Y. Hu, “Design and implementation of communication platform in CNC system,” in Proc. IEEE/ASME Int. Conf. MESA, Qingdao, China, Jul. 15–17, 2010, pp. 355–360. A. Onat, T. Naskali, E. Parlakay, and O. Mutluer, “Control over imperfect networks: Model-based predictive networked control systems,” IEEE Trans. Ind. Electron., vol. 58, no. 3, pp. 905–913, Mar. 2011. P. Martí, A. Camacho, M. Velasco, and M. El Mongi Ben Gaid, “Runtime allocation of optional control jobs to a set of CAN-based networked control systems,” IEEE Trans. Ind. Informat., vol. 6, no. 4, pp. 503–520, Nov. 2010. Á. Cuenca, J. Salt, A. Sala, and R. Pizá, “A delay-dependent dual-rate PID controller over an Ethernet network,” IEEE Trans. Ind. Informat., vol. 7, no. 1, pp. 18–29, Feb. 2011. G. Cena, L. Seno, A. Valenzano, and C. Zunino, “On the performance of IEEE 802.11e wireless infrastructures for soft-real-time industrial applications,” IEEE Trans. Ind. Informat., vol. 6, no. 3, pp. 425–437, Aug. 2010. REFERENCES

  23. A. Mifdaoui, F. Frances, and C. Fraboul, “Performance analysis of a master/slave switched Ethernet for military embedded applications,”IEEETrans. Ind. Informat., vol. 6, no. 4, pp. 534–547, Nov. 2010. P. Ferrari, A. Flammini, S. Rinaldi, and E. Sisinni, “On the seamless interconnection of IEEE1588-based devices using a PROFINET IO infrastructure,”IEEETrans. Ind. Informat., vol. 6, no. 3, pp. 381–392, Aug. 2010. Z. Hanzálek, P. Burget, and P. Šucha, “Profinet IO IRT message scheduling with temporal constraints,” IEEE Trans. Ind. Informat., vol. 6, no. 3, pp. 369–380, Aug. 2010. Industrial Communication Networks—Profiles—Part 2: Additional Fieldbus Profiles for Real-Time Networks Based on ISO/IEC 8802-3, IEC Std. 61784-2, 2007. L. Dozio and P. Mantegazza, “Linux Real Time Application Interface (RTAI) in low cost high performance motion control,” in Proc. Motion Control, Conf. ANIPLA, Milano, Italy, Mar. 27–28, 2003. EMC2 User Manual V2.4, EMC Team, Boston, MA, 2011. [Online].Available: www.linuxcnc.org/docs/2.4/EMC2_User_Manual.pdf Adjustable Speed Electrical Power Drive Systems—Part 7-201: Generic Interface and Use of Profiles for Power Drive Systems—Profile Type 1 Specification, IEC Std. 61800-7-201, 2007. M. Cereia, I. C. Bertolotti, and S. Scanzio, “Performance of a real-time EtherCATmaster under Linux,” IEEE Trans. Ind. Informat., vol. 7, no. 4, pp. 679–687, Nov. 2011. G. Cena, I. C. Bertolotti, S. Scanzio, A. Valenzano, and C. Zunino, “Evaluation of EtherCAT distributed clock performance,” IEEE Trans. Ind. Informat., vol. 8, no. 1, pp. 20–29, Feb. 2012. REFERENCES

  24. Numerical Control of Machines—Program Format and Definition of Address Words—Part 1: Data Format for Positioning, Line Motion and Contouring Control Systems, ISO Std. 6983-1, 1982. IEEE Standard for Information Technology—Telecommunications and Information Exchange Between Systems—Local and Metropolitan Area Networks—Specific requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications, IEEE Std. 802.3-2008, 2008. Information Technology—Open Systems Interconnection—Basic Reference Model: The Basic Model, IEC Std. 7498-1, 1996. Adjustable Speed Electrical Power Drive Systems—Part 7-301: Generic Interface and Use of Profiles for Power Drive Systems—Mapping of Profile Type 1 to Network Technologies, IEC Std. 61800-7-301, 2007. Introduction into openPOWERLINK Software Manual, SYS TEC Electronic GmbH, Greiz, Germany, 2008. [Online]. Available: www.systecelectronic.com/en/products/industrial-communication/ethernetpowerlink/openpowerlink-source-code/openpowerlink-source-coderelated-documents/introduction-into-openpowerlink-software-manual REFERENCES

More Related