1 / 42

Whole Blood and Blood Components

Whole Blood and Blood Components Diane K. Hall Consumer Safety Officer CBER, OBRR, DBA September 16, 2009 Presentation Outline Submission contents General Standard Operating Procedures (SOPs) Whole Blood and blood components Whole Blood and Red Blood Cells (RBCs)

arleen
Télécharger la présentation

Whole Blood and Blood Components

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Whole Blood and Blood Components Diane K. Hall Consumer Safety Officer CBER, OBRR, DBA September 16, 2009

  2. Presentation Outline • Submission contents • General Standard Operating Procedures (SOPs) • Whole Blood and blood components • Whole Blood and Red Blood Cells (RBCs) • RBC Modifications • Autologous Donations • Plasma • Platelets • Cryoprecipitated AHF

  3. General Submission Contents 21 CFR 601.12 * • Cover Letter • Form FDA 356h • Form FDA 2567 with Labels • Chemistry, Manufacturing and Control Section(CMC) • Appropriate SOPs • Validations and failure investigations • Quality Control (QC) • Records • Contractors’ names, addresses, registration numbers/CLIA approved

  4. General SOPs • 21 CFR 606.100: Maintain SOPs for all steps followed in collection, processing, storage and distribution of blood and blood components • 640.4(h): Whole Blood storage temperatures during transport from collection site to processing site: • Cooling continuously towards 1-10C, or • Held in an environment maintained at a temperature range specified for that component in the directions for use for the blood collecting, processing, and storage system

  5. General SOPs • 606.160(b)(5)(iv): Validate shipping containers • 606.65(e): Supplies shall be used in a manner consistent with manufacturer’s instructions • If applicable, submit SOP for Sterile Connecting Device procedure **

  6. Whole Blood

  7. Whole Blood21 CFR 640.1 - 640.6 • 640.2: General requirements • Manufacturing responsibility • Blood container • Reissue of blood • 640.3: Suitability of donor • 640.4: Collection of the blood • 640.5: Testing the blood

  8. Red Blood Cells

  9. RBCs21 CFR 640.10 - 640.17 • 640.11: General requirements • Storage • Inspection • 640.12: Suitability of donor • 640.13: Collection of the blood • 640.14: Testing the blood • 640.15: Segments for testing • 640.16: Processing

  10. RBC Modifications Red Blood Cells Washed Red Blood Cells Rejuvenated Red Blood Cells Frozen Red Blood Cells Deglycerolized

  11. Considerations for RBC Modifications: Storage and Dating Period Approved submissions have typically contained • Red Blood Cells Washed • Storage: 1-6C • Dating period: 24 hours from start of washing process • Red Blood Cells Rejuvenated • Storage: 1-6C • Dating period: 24 hours from start of washing process • Red Blood Cells Frozen Rejuvenated • Storage: <-65C • Dating period: 10 years for RBCs collected and stored in CPD or CPDA-1 or 3 years for RBCs stored in CPD/ AS-1

  12. RBC Modifications: Storage and Dating period 640.17, 610.53(c) • Red Blood Cells Frozen (FRBC) • Storage: <-65C • Dating period: 10 years, or as specified in the manufacturer’s instructions • Red Blood Cells Deglycerolized • Storage: 1-6C • Dating period: 24 hours after removal from <65C storage or as specified in the directions for use for the blood collection, processing, and storage system approved by FDA

  13. RBC Modifications: Product QC Considerations for Red Blood Cells Washed • Approved submissions typically have contained • Two months of product QC • 4 units/month • RBC Percent Recovery *** • Residual Total Protein *** • Sterility testing (10 units) ***

  14. RBC Modifications: Product QC • Red Blood Cells Deglycerolized and Red Blood Cells Rejuvenated • RBC Percent Recovery *** • Determination of free hemoglobin *** • Monitor glycerol removal *** • Sterility testing (10 units) ***

  15. Autologous Donations

  16. Autologous Donations • 640.3(b): Donor qualifications • 610.40(d): Infectious disease testing • 606.100(b)(20): Donor deferral

  17. Autologous Donations Labels 21 CFR 606.121(i) and (j) • Information identifying the patient, e.g. • Name, • Blood Group, • Hospital, • Identification Number • Date of donation • If applicable, “FOR AUTOLOGOUS USE ONLY” • May use a tie tag attached to the container

  18. Autologous DonationsLabels (cont.) 606.121(i)(4) • If donor fails to meet any Whole Blood donor suitability requirements, “FOR AUTOLOGOUS USE ONLY” label replaces the Blood Group label 610.40(h)(2)(ii)(B): • Components that have reactive infectious disease screening tests must be labeled with the “BIOHAZARD” legend

  19. Autologous DonationsLabels (cont.) 610.40(d) • If there is no cross over allowed and the units are not shipped anywhere else, then no infectious disease testing is required and the unit can be labeled, “DONOR UNTESTED” • If facilities cross over autologous units or ship to facilities that allow cross over, then all units must be tested for infectious diseases and labeled according to 606.121(i)

  20. Autologous DonationsLabels (cont.) 610.40(d) • If products are shipped to another facility that does not allow cross over, you must assure that the first donation in each 30-day period is tested. • Tested units: Label according to 606.121. • Untested units: Label as “DONOR TESTED WITHIN THE LAST 30 DAYS”

  21. Plasma Components Fresh Frozen Plasma (FFP) Plasma Cryoprecipitate Reduced Plasma Frozen Within 24 Hours After Phlebotomy

  22. Plasma21 CFR 640.30 – 640.34 • 640.31: Suitability of donors • 640.32: Collection of source material • 640.33: Testing the blood • 640.34: Processing

  23. Plasma Components • 640.34(b), 640.54(a)(2): Separate plasma from RBCs and place in freezer within 8 hours of phlebotomy or within the timeframe specified in the directions for use for the blood collecting, processing and storage system. • 610.53(c) • Storage: <-18C • Dating period: 1 year from the collection date of Whole Blood

  24. Platelet Components Platelets Pooled Platelets-5d, Leukocytes Reduced

  25. Platelets21 CFR 640.20-640.27 • 640.21: Suitability of donors • 640.22: Collection of source material • 640.23: Testing the blood • 640.24: Processing • 640.25: General requirements • Storage • Quality control testing • Manufacturing responsibility

  26. Platelets • 640.22(d) : Phlebotomy shall be performed by: • A single uninterrupted venipuncture • With minimal damage to and manipulation of donor’s tissue

  27. Platelets 640.24: Processing • Whole Blood temperatures during transport from collection site to processing site shall be maintained as close as possible to a range between 20-24C • Separate within 4 hours or within the timeframe specified in the direction for use for the blood collecting, processing, and storage system

  28. Platelets 640.25: Storage • 20-24C with continuous gentle agitation, or • 1-6C with no agitation 610.53(c): Dating period • 72 hours from the time of collection, or • 5 days, with approved containers

  29. Platelets 640.24(c) and (d) • The time and speed of the centrifuge should demonstrate that the manufactured product: • Is an unclumped product • Is without visible hemolysis • Yields a count of >5.5x1010 platelets per unit (75% of tested units) • The volume of original plasma used to resuspend the platelets shall maintain a pH of >6.2

  30. Considerations for Platelets:Product QC • Approved submissions have typically contained two consecutive months of product QC • 21 CFR 640.25 • 4 units/month • pH • Platelet count • Plasma volume

  31. Platelets: Product QC 640.24(c), 640.25: Acceptance Criteria for Platelets • pH: >6.2 • Platelet yield: 5.5x1010 platelets/unit in >75% of tested units

  32. Considerations for Pooled Platelets-5d, Leukocytes Reduced Approved submissions have typically contained • Manufacturing: Use a process based on the manufacturer’s package insert that is capable of demonstrating the specified acceptance criteria

  33. Considerations for Pooled Platelets-5d, Leukocytes Reduced Approved submissions have typically contained • Product QC • Two consecutive months of product QC • Statistically sound plan • Ensure products meet specifications stated in the manufacturer’s instructions • Acceptance Criteria • Acceptance criteria: manufacturer’s recommendations for product specifications

  34. Cryoprecipitate Components Cryoprecipitated AHF Pooled Cyroprecipitated AHF

  35. Cryoprecipitated AHF: 21 CFR 640.50 – 640.56 • 640.51: Suitability of donors • 640.52: Collection of source material • 640.53: Testing the blood • 640.54: Processing • 640.56: Quality control test for potency

  36. Cryoprecipitated AHF 640.54(a): Processing Plasma (cryo rich) • Separate plasma by centrifugation • Place plasma in freezer within 8 hours after collection or within the timeframe specified in the directions for use for the blood collecting, processing, and storage system • Store plasma at <-18C until further processed

  37. Cryoprecipitated AHF 640.54(b): Processing Final Product • Separate the Cryoprecipitated AHF from the plasma by a procedure that has been shown to produce an average of >80 IU of AHF/final container • Do not add diluent prior to freezing final product

  38. Cryoprecipitated AHF 610.53(c): for Cryoprecipitated AHF • Storage: <-18C • Dating period: 1 year from the date of Whole Blood collection

  39. Considerations for Cryoprecipitated AHF • Approved submissions typically have contained two consecutive months of product QC • 21 CFR 606.122(n), 640.56 • 4 units/month • Fibrinogen • AHF potency • Acceptance Criteria • Fibrinogen: >150 mg • Mean AHF potency: >80 IU of AHF/final container

  40. Considerations for Pooled Cryoprecipitated AHF Approved submissions have typically contained • Manufacturing • Use of Sterile Connecting Device ** • Storage: <-18C • Dating period: 1 year from the oldest unit’s date of collection • Product QC and Acceptance Criteria • Same as Cryoprecipitated AHF

  41. References * Guidance for Industry: Changes to an Approved Application: Biological Products: Human Blood and Blood Components Intended for Transfusion or for Further Manufacture ** Guidance for Industry: Use of Sterile Connecting Devices in Blood Bank Practices ***Guidance for Industry For the Submission of Chemistry, Manufacturing and Controls and Establishment Description Information for Human Blood and Blood Components Intended for Transfusion or for Further Manufacture and For the Completion of the Form FDA 356h “Application to Market a New Drug, Biologic or an Antibiotic Drug for Human Use” http://www.fda.gov/BiologicsBloodVaccines/GuidanceComplianceRegulatoryInformation/Guidances/Blood/default.htm Eight-Hour Hold http://www.fda.gov/BiologicsBloodVaccines/GuidanceComplianceRegulatoryInformation/OtherRecommendationsforManufacturers/MemorandumtoBlood Establishments/default.htm

  42. Questions - Contact us! • Mailing address: Director, Division of Blood Applications, OBRR, CBER, FDA HFM-370 c/o Document Control Center, HFM-99 1401 Rockville Pike, Suite 200N Rockville, MD 20852-1448 • Telephone: 301-827-3543 • FAX: 301-827-3534

More Related