1 / 23

Excavator X62 Installation

Excavator X62 Installation. This Webinar is LISTEN only. QUESTIONS?. Questions will be answered in writing at the end of the Webinar. Excavator X62 Installation Webinar September 18 th , 2009. LS-B10W Laser Receiver Installation LS-B10W Verification TS-1 Sensors

arwen
Télécharger la présentation

Excavator X62 Installation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Excavator X62 Installation

  2. This Webinar is LISTEN only QUESTIONS? Questions will be answered in writing at the end of the Webinar.

  3. Excavator X62 Installation Webinar September 18th, 2009 • LS-B10W Laser Receiver Installation • LS-B10W Verification • TS-1 Sensors • Installation/Calibration 9-4-09 Webinar • Verification 9-11-09 Webinar

  4. Reference Material 7010-0810 7010-0814

  5. LS-B10W Mounting • Where to mount the LS-B10W • Position the stick appropriately • LS-B10W vertical • Determine LS-B10W Location • Where on Stick to prevent damage

  6. LS-B10W Mounting Bracket

  7. LS-B10W Connection

  8. Body Measurements

  9. Boom Pivot Height • Graphical display only

  10. Laser Receiver Measurements Calibrate

  11. From Bucket Pivot Calibrate

  12. Left of Pivot Line Calibrate

  13. Depth to center of stick Calibrate

  14. Depth to center of stick Calibrate

  15. LS-B10W Laser Receiver Calibration • TS-1 Calibrated • 0.0o House roll • Position LS-B10W vertical • Press Calibrate

  16. LS-B10W Verification • Level String • 6’ below laser 6’ Below

  17. LS-B10W Verification • Zero to Laser (laser on detector) • Elevation set point -6’ • Verify bucket on string • Move machine and repeat

  18. Wedge Error • Wedge errors or Inconsistent elevation errors: • Perform Elevation Accuracy Verification to check machine and sensor calibration • TS-1 Sensor Calibration • Implement length

  19. Depth to Center of Stick • Depth to center of stick: • An error in this measurement would create an elevation error when the body of the machine is on a side slope. Calibrate

  20. Left of Pivot Line • Left of pivot line: • An error in this measurement would create an elevation error when the stick is referenced at any angle other than vertical. Calibrate

  21. From Bucket Pivot • From bucket pivot • An error in this measurement would create an elevation error when the stick was in any position other that horizontal. Calibrate

  22. LS-B10W Angle Calibration • LS-B10W angle calibration: • An error with this calibration would create and elevation error depending on the angle of the sensor when referencing the laser and the distance the laser is away from on-grade.

  23. Address to download all TU-Live Webinars: ftp://TUlive+topconuniversity.com:tulive@ftp.topconuniversity.com/ Recorded Webinar PP Presentation Webinar Q & A Additional requests for TU staff: Email: training@topcon.com Questions?

More Related