1 / 27

Class F3P Indoor Aerobatic Power Model aIRCRafts

Class F3P Indoor Aerobatic Power Model aIRCRafts. Schedule F3P – AF-15. Take-off procedure ( not judged, not scored ). Security line. F3P-AF-15.01: Knife Edge Golf Ball with 3/4 roll up, half roll integrated, 1/4 roll down. ½ roll integrated. ¼ roll. ¾ roll.

atara
Télécharger la présentation

Class F3P Indoor Aerobatic Power Model aIRCRafts

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Class F3P Indoor Aerobatic Power Model aIRCRafts Schedule F3P – AF-15

  2. Take-off procedure ( not judged, not scored ) Security line

  3. F3P-AF-15.01: Knife Edge Golf Ball with 3/4 roll up, half roll integrated, 1/4 roll down ½ roll integrated ¼ roll ¾ roll F3P-AF-15.01.01

  4. F3P-AF-15.01: Knife Edge Golf Ball with 3/4 roll up, half roll integrated, 1/4 roll down ½ roll integrated ½ roll is integrated on circular flightpath of the ¾ loop. ¾ roll and ¼ roll on middle of the lines. All radii are equal. ¼ roll ¾ roll 45° During the knife edge flight the wing must be in the vertical plane. F3P-AF-15.01.01

  5. F3P-AF-15.02: Vertical Eight F3P-AF-15.02.01

  6. F3P-AF-15.02: Vertical Eight All radii are equal. F3P-AF-15.02.02

  7. F3P-AF-15.03: Knife Edge Flight Combination with 1/4 roll, roll, 1/4 roll Part rolls must have the same roll rate. Between rolls and part rolls in opposite direction there must be no line. F3P-AF-15.03.01

  8. F3P-AF-15.04: Figure 6 with stall turn, 1/2 roll down Pivot on CG Stop before pivot ½ roll F3P-AF-15.04.01

  9. F3P-AF-15.04: Figure 6 with stall turn, 1/2 roll down Pivot on CG ½ roll F3P-AF-15.04.02

  10. F3P-AF-15.04: Figure 6 with stall turn, 1/2 roll down Pivot on CG Two wing spans or more – zero points! ½ roll on middle of the line. ½ roll All radii are equal. F3P-AF-15.04.03

  11. F3P-AF-15.05: Cubic Top–Hat with 3/4 roll up, 1/4 roll down, 1/2 roll, 3/4 roll up, 1/4 roll down ¼ roll ¾ torque roll ¼ roll ¾ torque roll ½ roll F3P-AF-15.05.01

  12. F3P-AF-15.05: Cubic Top–Hat with 3/4 roll up, 1/4 roll down, 1/2 roll, 3/4 roll up, 1/4 roll down ¼ roll ¾ torque roll ¼ roll ¾ torque roll ½ roll All radii are equal. ¾ torque rolls, ¼ rolls and ½ roll on middle of the lines. F3P-AF-15.05.02

  13. F3P-AF-15.06: Half Horizontal Square Circle on Corner with ¼ roll, ½ roll, ½ roll, ¼, roll ¼ roll ½ roll ½ roll ¼ roll F3P-AF-15.06.01

  14. F3P-AF-15.06: Half Horizontal Square Circle on Corner with ¼ roll, ½ roll, ½ roll, ¼, roll ½ rolls on middle of the line. ¼ roll ½ roll During the knife edge flight the wing must be in the vertical plane. ½ roll ¼ roll All radii are equal. F3P-AF-15.06.02

  15. F3P-AF-15.06: Half Horizontal Square Circle on Corner with ¼ roll, ½ roll, ½ roll, ¼, roll ¼ roll Option ½ roll ½ roll ¼ roll F3P-AF-15.06.03

  16. F3P-AF-15.07: Eye-Catcher with two 3/4 rolls integrated in opposite directions ¾ rollintegrated ¾ rollintegrated F3P-AF-15.07.01

  17. F3P-AF-15.07: Eye-Catcher with two 3/4 rolls integrated in opposite directions Roll reversal is immediate. ¾ rollintegrated ¾ rollintegrated Rolls must be in opposite directions. ¾ rolls must be integrated on circular flight path of the ¾ loops. Al radii are equal. F3P-AF-15.07.02

  18. F3P-AF-15.08: Half Horizontal Hour Glass with ½ roll down, roll up ½ roll down ½ roll roll ½ roll F3P-AF-15.08.1

  19. F3P-AF-15.08: Half Horizontal Hour Glass with ½ roll down, roll up ½ roll down ½ rolls and roll on middle of the lines. 45° roll ½ roll All radii are equal. ½ roll F3P-AF-15.08.2

  20. F3P-AF-15.09: Horizontal Triangular Circle with 1/4 roll, 1/2 roll integrated, roll, 1/2 roll integrated, roll, 1/2 roll integrated, 1/4 roll ½ roll outside integrated roll inside roll inside ½ roll outside integrated ¼ roll F3P-AF-15.09.01

  21. F3P-AF-15.09: Horizontal Triangular Circle with 1/4 roll, 1/2 roll integrated, roll, 1/2 roll integrated, roll, 1/2 roll integrated, 1/4 roll ½ roll outside integrated roll inside roll inside ½ roll outside integrated ¼ roll F3P-AF-15.09.02

  22. F3P-AF-15.09: Horizontal Triangular Circle with 1/4 roll, 1/2 roll integrated, roll, 1/2 roll integrated, roll, 1/2 roll integrated, 1/4 roll All sides are of equal length, all angles are 60°. During the knife-edge the wing must be in the vertical plane. All radii are equal. All ½ rolls are outside and integrated on the flightpath in the corners. All full rolls are inside and on middle of the lines. F3P-AF-15.09.03

  23. F3P-AF-15.10: Tail Slide with two consecutive 1/8 rolls up 1/8 roll 1/8 roll F3P-AF-15.10.01

  24. F3P-AF-15.10: Tail Slide with two consecutive 1/8 rolls up Stick back tail slide. F3P-AF-15.10.02

  25. F3P-AF-15.10: Tail Slide with two consecutive 1/8 rolls up 1/8 rolls centered on middle of the line. 1/8 roll 1/8 roll Between part rolls in opposite direction there must be no line. Flipover = 0 points. All radii are equal. F3P-AF-15.10.03

  26. F3P-AF-15.11: Roll Combination with 1 3/4 roll, 1 3/4 roll in opposite direction 1 ¾ roll 1 ¾ roll Between rolls and in opposite direction there must be no line. F3P-AF-15.11.01

  27. Landing sequence ( not judged, not scored ) security line Peter Uhlig, November 2013

More Related