1 / 12

Burnthrough Test Method for Aircraft Thermal/Acoustic Insulation:

Burnthrough Test Method for Aircraft Thermal/Acoustic Insulation:. Burner Replacement Investigation. Materials Working Group. Robert I. Ochs. October 19, 2005. Outline. Motivation Original Burner Operation Problems Solutions Plan of Attack. Motivation. Need for new test apparatus

avannatter
Télécharger la présentation

Burnthrough Test Method for Aircraft Thermal/Acoustic Insulation:

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Burnthrough Test Method for Aircraft Thermal/Acoustic Insulation: Burner Replacement Investigation Materials Working Group Robert I. Ochs October 19, 2005

  2. Outline • Motivation • Original Burner Operation • Problems • Solutions • Plan of Attack

  3. Motivation • Need for new test apparatus • Inconsistencies in burner performance • Reproducibility of experiment critical for compliance • Burner performance dependent upon several factors • Electric motor • Supply voltage differences and fluctuations • Does motor/fan supply constant, steady flow rate of air? • Variability in construction • Flange-type burners • Socket-type burners • Differences in blower castings • Laboratory conditions • Local air temperature, humidity affect supply air density, fuel to air mass ratio

  4. Operation of Oil Burner • Simple design • Turbulent airflow is mixed with fuel spray • Air/fuel mixture is ignited with high energy spark

  5. Problems • Remove dependence upon electric motor What does the motor do? • Directs lab air through the blower housing and draft tube towards the sample at a fixed velocity/flow rate • Pressurizes liquid fuel to approx. 100 psi, which is required for Monarch-type fuel nozzles

  6. Replacement of Electric Motor • Task 1: To supply air to the draft tube at a controllable velocity / flow rate • Solution: Utilize compressed air from laboratory compressor / reservoir • More control over level of conditioning of supply air • Humidity • Temperature • Pressure • Flow can be metered with a sonic choke to deliver a constant mass flow rate of air • Mass flow rate will be fixed for choked flow • Choked flow for positive pressure conditions can be achieved by maintaining a constant inlet pressure and certain range of backpressures • Required parts / instrumentation: • Sonic choke • Precision air pressure regulator (moderate to high flow) • Pressure gauge (0-200 psig) and transducer to measure and record sonic choke inlet pressure • Solenoid valve to remotely operate the compressed air supply • Type-K thermocouple for inlet air temperature www.foxvalve.com

  7. Replacement of Electric Motor • Task 2: To supply the fuel rail / nozzle with fuel (JP-8) at an adjustable pressure • Solution: Construct a pressurized fuel tank • Fill partially with JP-8 • Pressurize the headspace with compressed N2 from gas bottle with pressure regulator • Required parts / instrumentation: • Pressure vessel • Pressure gauge and transducer to monitor fuel pressure • Bleed valve to reduce pressure • Compressed nitrogen and bottle regulator • Liquid level sight gauge to monitor fuel level • Solenoid valves for remote operation of fuel flow and fuel tank pressurization

  8. Draft Tube / Ignition • Plan to reconstruct a draft tube to similar specifications of original draft tube • Construct out of 4.25” O.D. , 4” ±0.01” steel tubing (mild seam) • This size tubing will fit the stator / ignitor assembly from the original burners • Use same ignition source • Use same end cap (turbulator) as original burner • Use cone specified in rule

  9. Current Test Apparatus

  10. Proposed Replacement Apparatus

  11. Plan • Construct apparatus to similar specifications as original burner • Characterize output, compare with desired output from specifications • If output is not similar, determine variables in the apparatus and characterize the effect of the variables on burner performance • Possible variables: • Draft tube / flow straighter length • Swirl / vorticity of flow • Symmetry of draft tube innards • etc. • Try to remove any ambiguities or uncertainties in this apparatus • Reduction of complexity results in simplification of operation and adjustability

  12. Questions, Concerns, Comments, Input?

More Related