html5-img
1 / 25

Wireless communication channel

Wireless communication channel. Effects on Radio Communication. Signal degradation can be classified by type : Path Loss happen during distance covered by the radio signal, it is called “Free space path loss “, it can be calculated by

aviva
Télécharger la présentation

Wireless communication channel

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Wireless communication channel

  2. Effects on Radio Communication • Signal degradation can be classified by type : • Path Loss happen during distance covered by the radio signal, it is called “Free space path loss “, it can be calculated by LFS = 32.44 + 20 log F (MHz) +20 log d (Km) • Signal attenuation Resulting from shadowing effects introduced by the obstacles between transmitter and receiver • Fading of the signal Caused by numerous effects all of which are related to the Radio propagation phenomenon

  3. Wireless Multipath Channel One of the most problem in communication channel is fading

  4. Fading Problems • Shadowing (Normal fading): • The reason for shadowing is the presence ofobstacles like large hills or buildings in the path between the site and the mobile. • The signal strength received fluctuates around a mean value while changing the mobile position resulting in undesirable beats in the speech signal.

  5. Fading Problems • Raleigh Fading (Multi-path Fading): • The received signal is coming from different paths due to a series of reflection on many obstacles. The difference in paths leads to a difference in paths of the received components.

  6. Parameters of multi-path channel Time Domain FrequencyDomain 1- Max delay spread:2- Coherence BW: 3- Coherence Time :4- Doppler Shift:

  7. Doppler Shift • Phase change due to path length difference • Doppler shift (apparent change in freq.)

  8. Types of fading

  9. At High Data Rate • High data rate transmission • short symbol time compared to the delay spread. = Delay spread = Symbol period Problems 1- ISI = signal BW = coherence BW 2-

  10. Orthogonal frequency division multiplexing (OFDM)

  11. History • OFDM was introduced in 1950 but was only completed in 1960’s Originally grew from Multi-Carrier Modulation used in High Frequency military radio. • Patent was granted in 1970’s • Earlier OFDM wasn’t popular Large arrays of sinusoidal generators and coherence demodulator Too expensive and complex. • Later when DFT and IDFT became a known solution to the arrays of generators and demodulators. • It was still not popular as there is no efficient method to perform the IFFT and FFT operation. • Advances in VLSI technology allows implementation of fast and cheap FFT and IFFT operation drive OFDM popularity.

  12. Applications

  13. OFDMOrthogonal Frequency Division Multiplexing • Frequency Division Multiplexing • -Divide the information over several carriers Instead of using one big truck When The truck is lost… All is lost! Use several small trucks When one truck is lost… Only a portion of the shipment is lost!

  14. Concept of an OFDM signal Ch.1 Ch.2 Ch.3 Ch.4 Ch.5 Ch.6 Ch.7 Ch.8 Ch.9 Ch.10 Conventional multicarrier techniques frequency Ch.2 Ch.4 Ch.6 Ch.8 Ch.10 Ch.1 Ch.3 Ch.5 Ch.7 Ch.9 Saving of bandwidth 50% bandwidth saving Orthogonal multicarrier techniques frequency

  15. OFDM changes Frequency Selective Fading to Flat Fading Channel N number of subcarrier . . . . . .

  16. Solution to Frequency Selective Fading When the data rate is lower = Delay spread = Symbol period = signal BW = coherence BW Frequency Selective => Flat Fading In flat fading, the amplitude varies but there is no ISI

  17. Multicarrier Modulation • Divide broadband channel into narrowband subchannels • No ISI in subchannels if constant gain in every subchannel and if ideal sampling • Orthogonal Frequency Division Multiplexing • Based on the fast Fourier transform • Standardized for DAB, DVB-T, IEEE 802.11a, 802.16a, HyperLAN II • Considered for fourth-generation mobile communication systems channel subcarrier magnitude subchannel frequency Subchannels are 312 kHz wide in 802.11a and HyperLAN II

  18. OFDMFrequency Spectrum Use many carriers that are equally spaced: k = 0, 1, … , N-1 Ts = Symbol Time Carrier 1 has a maximum where all other carriers are 0 1 2 3 4 5 frequency

  19. OFDM • Many carriers with small spacing => Long symbol time • But many carriers carry a lot of information! • Long symbol time is an advantage! • Delay Spread (Multipath) Direct Path Symbol n Symbol n+1 Symbol n-1 Delayed Path Symbol n-1 Symbol n Symbol n+1 ISI ISI ISI = Inter Symbol Interference

  20. OFDM Avoid ISI and preserve Orthogonality => Guard Interval Total Symbol length Useful Symbol length Guard Symbol n Guard Direct Path Guard Symbol n-1 Guard Symbol n Guard Symbol n+1 Delayed Path Guard Symbol n-1 Guard Symbol n Guard Symbol n+1 Symbol n is added constructively or destructively according to phase Integration Period

  21. copy copy s y m b o l ( i+1) CP CP s y m b o li CP: Cyclic Prefix v samples N samples Avoid ICI and preserve Orthogonality => cyclic prefix

  22. Discrete versus FastFourier Transform • Discrete (DFT): • For each frequency sample ‘k’ (0 to N-1) loop ‘n’ (over 0 to N-1) => N2 complex multiplications • Fast (FFT, Cooley-Tukey algorithm): • “An efficient algorithm to calculate a DFT” • N.log(N) complex multiplications

  23. OFDM Block Diagram

  24. Main advantages • High spectral efficiency. And high data rate. • Efficient in multipath environments. • Simple digital realization by using the FFT operation. • Low complex receivers due to avoidance of ISI. •Different modulation schemes can be used on individual sub-carriers.

  25. x Drawbacks • Large Peak to Average Ratio (PAR). • Added sinusoid cause large PAR and issue of amplifier non-linearity arises. • Accurate frequency and time synchronization is required. • More sensitive to Doppler spreads than single-carrier schemes. • Sensitive to frequency offset and phase noise caused by imperfections in the transmitter and the receiver oscillators. • Guard interval causes loss in spectral efficiency

More Related