1 / 15

Advanced Gear Analysis

Advanced Gear Analysis. Epicyclic Gearing Tooth Strength Analysis. INPUT. CARRIER. Epicyclic Gearset. An epicyclic gear set has some gear or gears whose center revolves about some point. Here is a gearset with a stationary ring gear and three planet gears on a rotating carrier.

baakir
Télécharger la présentation

Advanced Gear Analysis

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Advanced Gear Analysis • Epicyclic Gearing • Tooth Strength Analysis

  2. INPUT CARRIER Epicyclic Gearset An epicyclic gear set has some gear or gears whose center revolves about some point. Here is a gearset with a stationary ring gear and three planet gears on a rotating carrier. The input is at the Sun, and the output is at the planet carrier. The action is epicyclic, because the centers of the planet gears revolve about the sun gear while the planet gears turn. Finding the gear ratio is somewhat complicated because the planet gears revolve while they rotate. Sun Planet Ring

  3. INPUT OUTPUT INPUT OUTPUT Epicyclic Gearset Let’s rearrange things to make it simpler: 1) Redraw the planet carrier to show arms rotating about the center. 2) Remove two of the arms to show only one of the planet arms.

  4. OUTPUT INPUT The Tabular (Superposition) Method To account for the combined rotation and revolution of the planet gear, we use a two step process. First, we lock the whole assembly and rotate it one turn Counter-Clockwise. (Even the Ring, which we know is fixed) We enter this motion into a table using the convention: CCW = Positive CW = Negative Planet Arm Sun Ring

  5. 1 Turn Planet Arm Sun Ring The Tabular (Superposition) Method • Next, we hold the arm fixed, and rotate whichever gear is fixed during operation one turn clockwise. • Here, we will turn the Ring clockwise one turn (-1), holding the arm fixed. • The Planet will turn NRing / NPlanet turns clockwise. • Since the Planet drives the Sun, the Sun will turn (NRing / NPlanet) x (-NPlanet / NSun) = - NRing / NSun turns (counter-clockwise). • The arm doesn’t move. • We enter these motions into the second row of the table.

  6. The Tabular (Superposition) Method Finally, we sum the motions in the first and second rows of the table. Now, we can write the relationship: If the Sun has 53 teeth and the Ring 122 teeth, the output to input speed ratio is +1 / 3.3 , with the arm moving the same direction as the Sun.

  7. OUTPUT INPUT Sun Planet Ring Planetary Gearset The configuration shown here, with the input at the Sun and the output at the Ring, is not epicyclic. It is simply a Sun driving an internal Ring gear through a set of three idlers. The gear ratio is: n = speed; N = # Teeth Where the minus sign comes from the change in direction between the two external gears. If the Sun has 53 teeth and the Ring 122 teeth, the ratio is -1 / 2.3 .

  8. Another Epicyclic Example Here are three different representations of the same gearset: Given: 1. Ring = 100 Teeth (Input)2. Gear = 40 Teeth3. Gear = 20 Teeth4. Ring = 78 Teeth (Fixed)5. Arm = Output Always draw this view to get direction of rotation correct. See the Course Materials folder for the solution.

  9. OUT IN 1 IN 2 Epicyclic Tips • If you encounter a gear assembly with two inputs, use superposition. Calculate the output due to each input with the other input held fixed, and then sum the results. • Typically, when an input arm is held fixed, the other output to input relationship will not be epicyclic, but be a simple product of tooth ratios. • Use the ± sign with tooth ratios to carry the direction information.

  10. Gear Loading • Once you determine the rotational speeds of the gears in a train, the torque and therefore the tooth loading can be determined by assuming a constant power flow through the train. • Power = Torque x RPM, so Torque = Power / RPM • If there are n multiples of a component (such as the 3 idlers in the planetary gearset example) , each component will see 1/n times the torque based on the RPM of a single component. • From the torque, T, compute the tangential force on the teeth as Wt= T/r = 2T/D , where D is the pitch diameter.

  11.     The Tabular Method - Example 2 First, we lock the assembly and rotate everything one turn CCW Next, we hold the arm fixed, and turn the fixed component (Ring 4) one turn CW, to fill in row two.

  12.     The Tabular Method - Example 2 First, we lock the assembly and rotate everything one turn CCW Next, we hold the arm fixed, and turn the fixed component (Ring 4) one turn CW, to fill in row two.

  13.     The Tabular Method - Example 2 • We turn Ring 4 one turn CW (-1). • Ring 4 drives Gear 3, which turns + N4/N3 x (-1) = - N4/N3 rotations. • Gear 2 is on the same shaft as Gear 3, so it also turns - N4/N3 rotations. • Gear 2 drives Ring 1, which turns+ N2/N1 x n2 = + N2/N1 x (- N4/N3) = - N2N4/N1N3rotations. • The arm was fixed, so it does not turn. We enter these motions into row two of the table:

  14.     The Tabular Method - Example 2 Then we add the two rows to get the total motion And we can write the relationship:

  15.     The Tabular Method - Example 2 For our example Ring 1: N1 = 100 Teeth Gear 2: N2 = 40 TeethGear 3: N3= 20 TeethRing 4: N4 = 78 Teeth We compute: • The output arm rotates almost twice as fast as the input ring, and in the opposite direction. • Output direction is dependent on the numbers of teeth on the gears!

More Related