1 / 35

midterm 3, overview

midterm 3, overview. This overview highlights the key points of the material. It is not necessarily complete; you should judge what additional material should be on your equation sheet. PHY232 Remco Zegers zegers@nscl.msu.edu Room W109 – cyclotron building

ban
Télécharger la présentation

midterm 3, overview

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. midterm 3, overview This overview highlights the key points of the material. It is not necessarily complete; you should judge what additional material should be on your equation sheet. PHY232 Remco Zegers zegers@nscl.msu.edu Room W109 – cyclotron building http://www.nscl.msu.edu/~zegers/phy232.html

  2. light as waves (22) • in vacuum, the speed of light is 3x108 m/s • in any other substance: vlight=c/n with n the index of refraction of the material • nair = 1.003 (nearly like vacuum) • v=f with : wavelength, f: frequency • I=Psource/(4R2) I: intensity (W/m2) Psource :power of source. R distance from source PHY232 - Remco Zegers -

  3. example Light with a wavelength of 600 nm (in water) travels from water (n=1.33) to glass (n=1.5). What are the wavelength, frequency and speed of light in the water and in the glass? In water: v=c/n=3x108/1.33=2.26x108 m/s =600x10-9 m (given) f=v/=3.77x1014 Hz In glass: v=c/n=3x108/1.5=2x108 m/s f: remains unchanged!! = 3.77x1014 Hz =v/f=2x108/3.77x1014=5.30x10-7 m PHY232 - Remco Zegers -

  4. reflection/refraction (22) • reflection:1=r • refraction: • Snell’s law: n1sin1=n2sin2 • two cases: • 1) n1< n2:1> 2 and no total internal reflection (but some reflection can happen) • 2) n1>n2: 1< 2 but ifsin1>n2/n1total internal reflection will take place and =sin-1(n2/n1) is called the critical angle 1 r n1 n1<n2 n2 2 1 r n1>n2 n1 n2 2 PHY232 - Remco Zegers -

  5. example • light travels from glass (n=1.5) to air (n=1) under an angle of 400. What is the angle of refraction? is there an incident angle for which total internal reflection will take place? If so, what is the critical angle? • Snell’s law: n1sin1=n2sin2 n1=1.5 n2=1 1=400 so 2=74.60 • since n1>n2 total internal reflection can take place and the critical angle is sin-1(n2/n1)=41.80 PHY232 - Remco Zegers -

  6. mirrors and lenses: general (23) • p: object distance (we always choose this +) • q: image distance (can be + or -) • f: focal length (can be + or -) • lens/mirror equation: 1/p+1/q=1/f note: use of signs is different for mirrors or lenses • virtual image: light is NOT actually passing through the image • magnification M=-q/p=(size of image)/(size of object) • negative if inverted (upside-down relative to object) • |M| < 1 : image is smaller than object • |M| > 1 : image is larger than object PHY232 - Remco Zegers -

  7. Mirrors: an overview (23) • mirror equation 1/p + 1/q = 1/f • f=R/2 where R is the radius of the mirror • magnification: M=-q/p • q negative means: image is on other side of mirror than objects PHY232 - Remco Zegers -

  8. example • an object is placed at a distance of two times the focal length in front of a convex mirror. If the focal length is –5 cm, what is the magnification? • 1/p+1/q=1/f • f=-5 cm, p=10 cm, so 1/q=1/(-5)-1/10=-0.3 • q=-3.33 cm • M=-q/p=-(-3.33)/10.=0.33 • The image is virtual (q is negative, I.e. on the other side of the mirror as the object), upright (M+) and demagnified (|M|<1). PHY232 - Remco Zegers -

  9. lenses, an overview (23) • mirror equation 1/p + 1/q = 1/f • magnification: M=-q/p • lens makers equation: 1/f=(n-1)(1/R1-1/R2) • q negative: on same side of the lens as object different meaning than for mirrors PHY232 - Remco Zegers -

  10. example • an object is placed in front of a lens. An image is created that is situated on the same side of the lens as the object and that is larger than the object. Is the lens converging or diverging? • the image must be virtual (same side as object). This still allows both types of lenses. But a diverging lens must have |M|<1 (I.e. image smaller than the object) so that the lens must be converging. PHY232 - Remco Zegers -

  11. interference (24) • constructive interference: path length difference between two sources: m with m=0,1,2… • destructive interference: path length difference between two sources: (m+1/2) with m=0,1,2… destructive constructive PHY232 - Remco Zegers -

  12. double-slit experiment constructive: dsin=m destructive: dsin=(m+1/2) m=0,1,2,3… constructive: bright fringe/maxima destructive: dark fringe/minima • if  small: =sin=tan : radians!! • constructive: ym=mL/d • destructive: ym=(m+1/2)L/d • if  not small (but can also be used if  is small): • constructive: dsin=m & tan=y/L • destructive: dsin=(m+1/2) & tan=y/L L follows from PHY232 - Remco Zegers -

  13. example • the distance between the central maximum and first minimum in the interference pattern created by a double slit system is 1 cm. If the distance between the slits and the screen is 10 cm, what is the slit distance d? Given, =550 nm • central maximum: y=0 • first minimum:dsin=1/2  m=0 • tan=y/L=1/10 so =5.71o • d=0.5 x 550x10-9/sin(5.71)=2.76x10-6 m (2.76 micrometer) PHY232 - Remco Zegers -

  14. reflection & interference(24) • remember that the wavelength of light in a medium with index of refraction n is is vacuum/n 1 2 1 2 n1<n2 n1>n2 1/2 phase change no phase change PHY232 - Remco Zegers -

  15. constructive interference between ray 1 and 2: a procedure: if no phase shifts occur at boundaries a-b and b-c (na>nb>nc): 2d=mb if phase shift occurs at boundary a-b only (na<nb nb>nc): 2d=(m+1/2)b if phase shift occurs at boundaries a-b and b-c (na<nb nb>nc): 2d=mb destructive interference between ray 1 and 2: a procedure: if no phase shifts occur at boundaries a-b and b-c (na>nb>nc): 2d=(m+1/2)b if phase shift occurs at boundary a-b only (na<nb nb>nc): 2d=mb if phase shift occurs at boundaries a-b and b-c (na<nb nb>nc): 2d=(m+1/2)b thin layers 1 2 na nb nc more general • constructive: • even number of phase shifts: 2d=mb • odd number of phaseshifts: 2d=(m+1/2)b • destructive: • even number of phase shifts: 2d=(m+1/2)b • odd number of phaseshifts: 2d=mb PHY232 - Remco Zegers -

  16. example • at top boundary: no phase shift since na>nb • a lower boundary: no phase shift since nb>nc • so 2d=mb for constructive interference (even number of phase shift) 1 2 na nb nc given na=1.5 nb=1.3 nc=1, for which d will constructive interference occur? PHY232 - Remco Zegers -

  17. single-slit diffraction(24) diffraction due to a single slit of width a: • minima (destructive interference) asin=m, m=1,2,3… • maxima (constructive interference) asin=(m+1/2), m=1,2,3… and =0 PHY232 - Remco Zegers -

  18. example • what is the smallest slit width that will produce a diffraction interference pattern for light with a wavelength of 500 nm? • an interference pattern is made if there is at least one minimum (besides the central maximum). for this minimum <900 so sin<1 • asin=m for minima, m=1 so a> PHY232 - Remco Zegers -

  19. diffraction grating constructive interference dsin=m, m=0,1,2,3… destructive interference dsin=(m+1/2), m=0,1,2,3… instead of giving d, one usually gives the number of slits per unit distance: e.g. 300 lines/mm d=1/(300 lines/mm)=0.0033 mm PHY232 - Remco Zegers -

  20. example • a diffraction grating has 2000 lines per cm. what is the difference in angle between the 1st order maxima for light with a wavelength of 500 nm and 600 nm? • 1st order maximum: m=1 • d=0.01/2000=5x10-6 m • for 500 nm: sin=/d so =sin-1(500x10-9/5x10-6)=5.70 • for 600 nm: sin=/d so =sin-1(600x10-9/5x10-6)=6.90 • difference: 6.8-5.7=1.10 PHY232 - Remco Zegers -

  21. polarization (24) • if unpolarized light with intensity I0 falls on a linear polarizer with polarization axis , then the intensity after the polarizer is I0/2 • if polarized light with intensity I1 and polarization axis 1 (relative to a fixed axis, usually the horizontal or vertical) falls on a linear polarizer with polarization axis  (measured relative to the same axis), then the intensity of the light after this polarizer (I2) is: I2=I1cos2(|1-|) • light reflected from a surface is completely polarized if: =tan-1(n2/n1) (the brewster angle) PHY232 - Remco Zegers -

  22. example first polarizer: I1=I0/2=970/2=485 W/m2 for every next polarizer: In=In-1cos2100=In-10.96985 This is done 9 times, so I10=I1(0.96985)9=0.759I1 so I10=0.759*485=368 W/m2 PHY232 - Remco Zegers -

  23. optical instruments (25) • power of a lens P = 1/f (unit: diopters (1/m)) • farpoint: the largest distance at which objects can clearly be seen by the eye. It is `infinity` for a good eye • to solve nearsightedness: the lens should be made such that the image of an object (p) at infinity is projected at the far-point (FP)of that person: 1/ + 1/(-FP) = 1/flens • f will be negative (diverging lens), note: take q negative • nearpoint: the smallest distance at which objects can clearly be seen by the eye. It is about 25 cm for a good eye • to solve farsightedness: the lens should be made such that the image of an object (p) located at the desired nearpoint (I.e. ~25 cm or what is given in the problem) is located at the near point of the person: 1/NPdesired+1/(-NPperson)=1/flensnote: take q negative • f will be positive (converging lens) PHY232 - Remco Zegers -

  24. example • a person has a far point of 2 m and wears corrective lenses to solve this defect. Using these lenses, where will the image of an object located at the nearpoint (25 cm) be located? • to solve the nearsightedness, the lenses must have a focal length: 1/ + 1/(-FP) = 1/flens • so: flens=-FP=-2 m. • the image of an object at the nearpoint will the be located at: • 1/(-25 cm)+1/q=1/(-200 cm) solve for q: -22.2 cm PHY232 - Remco Zegers -

  25. simple magnifier (25) • angular magnification m=I/0 • m=I/0=(h/p)/(h/NP)=NP/p with p<f • best result if p=f: m=NP/f PHY232 - Remco Zegers -

  26. microscope (25) • magnifying power: m=-NP L/(fOfe) • fo: focal length of objective lens • fe: focal length of eye piece • NP: near point (25 cm or what is given) • L: distance between the two lenses PHY232 - Remco Zegers -

  27. telescope (25) • magnifying power m= e/o=fo/fe note L=f0+fe • fo: focal length of objective lens • fe: focal length of eye piece • L: distance between the two lenses PHY232 - Remco Zegers -

  28. rayleigh’s criterion (25) • two images are just resolved if rayleigh’s criterion is fulfilled. • Rayleigh’s criterion: the central maximum of image A false into the first minimum of image B • first diffraction minimum: sin=/a with A the slitwidth • images separated by a minimum angle min=/a can just be resolved • if the aperture is circular with diameter D: min=1.22/D PHY232 - Remco Zegers -

  29. example • the diameter of an aperture used for a telescope is 1 m. If two stars are 400x1015 m away from earth, what is the smallest separation between these two stars for which they can still be distinguished by the telescope? Assume =500 nm • min=1.22/D=1.22 x 500x10-9/1=6.1x10-7 • tan(min)= min=distance/400x1015 m • distance=2.44x1011 m PHY232 - Remco Zegers -

  30. relativity (26) Time dilation tp: proper time is the time interval between two events as measured by an observer who sees the two events occur at the same positions (the observer is in the same frame of reference as the clock) Lorentz contraction: L=Lp/=Lp(1-v2/c2) Lp: proper length is the length of an object as measured by a person who is at rest relative to that object (the person is in the same frame of reference as the object) PHY232 - Remco Zegers -

  31. example • you are traveling in a space ship at a speed of 0.9 times the speed of light relative to MSU campus along the direction of Shaw Lane. If Shaw lane is 2 miles long as viewed by a person living on campus, how long is it as viewed from your space ship? • proper length: as seen by the persn living on campus. • L=Lp/=Lp(1-v2/c2) • =2.3 so L=2 miles / 2.3=0.87 miles. PHY232 - Remco Zegers -

  32. Relativistic addition of velocities (26) • frame d is moving in the +x direction relative to frame b with a velocity vdb. The velocity of an object a is measured in frame d to be vad. Then the above equation gives the velocity vab of a in the frame b. • Note that if vad and vdb are small, vab=vad+vdb which is the common equation for relative motion. PHY232 - Remco Zegers -

  33. example • a spaceship is moving away from earth at 0.5 times the speed of light. It sends a message towards earth at the speed of light (aimed directly at earth). What is the speed of the message as seen from a person on earth? • vdb=+0.5c (speed of ship relative to earth) • vad=-1.0c (speed of message relative to ship) • vab=(-1.0c+0.5c)/(1+(-1.0cx0.5c)/c2)=-1c PHY232 - Remco Zegers -

  34. relativistic energy and momentum (26) • relativistic momentum: • energy-mass equivalence (rest mass): • kinetic energy • total energy: • kinetic energy of a particle with charge |q| accelerated • over a voltage V: qV • note: 1eV=1.6x10-19 J=the amount of energy gained by a • unit charge when accelerated over 1V. PHY232 - Remco Zegers -

  35. example • a rocket with a mass of 10 kg is traveling at half the speed of light? Which is greater, its kinetic energy or its rest energy? • rest energy: E=mc2 = 10*(3x108)2=9x1017 J • kinetic energy: • =1.15, so • Ekin=(1.15-1)mc2=0.15mc2 • this is only 15% of the rest energy. PHY232 - Remco Zegers -

More Related