1 / 31

CNT-150VT

CNT-150VT. Question #1 Your name. Question #2 Your computer number ##. Question #3 How many hosts can there be on a /24 subnet?. Question #4 What are LUNs used for?. Question #5 What’s the minimum number of disks for fault tolerance or redundancy in a RAID array?.

bao
Télécharger la présentation

CNT-150VT

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CNT-150VT

  2. Question #1Your name

  3. Question #2Your computer number ##

  4. Question #3How many hosts can there be on a /24 subnet?

  5. Question #4What are LUNs used for?

  6. Question #5What’s the minimum number of disks for fault tolerance or redundancy in a RAID array?

  7. Question #6Is 192.168.1.0 a valid host address?

  8. Question #7From a Windows command prompt, what command would you type to find out the IP address of the host?

  9. Question #8Why does a computer have a MAC addresses?

  10. Question #9What is the subnet mask for a /16 network?

  11. Question #10What port number does DNS use?

  12. Question #11Does DNS use TCP or UDP?

  13. Question #12In Microsoft’s Active Directory, what is the maximum number of Active Directory Forests that can be contained in an Active Directory Domain?

  14. Question #13You have one each of a 100, 200, 300 and 400 gig hard drive. The server you are working on holds 3 drives and supports RAID 5 only. What would be the largest disk capacity presented to the OS?

  15. Question #14What layer in the OSI model are ports defined?

  16. Question #15Two DHCP servers are on one subnet. Your host is configured for DHCP.Which DHCP server will your host accept the IP address from?

  17. Question #16Where are WWN or WWIDs used?

  18. Question #17Which protocol is used for Time Synchronization?( SNTP, SNMP, SMTP )

  19. Question #18You need to reliably transfer a file between two hosts. Which protocol would you use?( ICMP, UDP, TCP )

  20. Question #19An iSCSI Initiator communicates with an iSCCI __________ ?

  21. Question #20You have a computer with 6 GB of RAM. Windows XP OS is installed.How much RAM will Windows Systems property report?

  22. Question #21You have a host with a public IP address of 8.3.4.5. The host is able to reach hosts on the internet with the exception of a host with an address of 10.10.100.102 .Why can’t your host communicate with 10.10.100.102 host?

  23. Question #22Computer 1 network settings are Address: 192.168.1.106 Subnet Mask: 255.255.255.0Default Gateway : 192.168.1.1Computer 2 network settings are Address: 192.168.1.106 Subnet Mask: 255.255.255.0Default Gateway :Both computers are on the same subnet. Will Computer 1 be able to transfer a file to Computer 2?

  24. Question #23What is one major difference between a switch and a router?What OSI layer is a router associated with?(Number or name)What OSI layer is a switch associated with?(Number or name)

  25. Question #24Write a valid MAC address.

  26. Question #25What’s one major difference between a SAN and NAS?

  27. Question #26Is RAID 50 a valid RAID configuration?

  28. Question #27What is the Internet about to run out of?

  29. Question #28What happens to a file share if a $ character is added to the end?As in servername\C$

  30. Question #29What network device retransmits all incoming traffic out of all ports?Could be a router, switch, hub or a firewall/

  31. Question #30A Windows server is having problem with an application. To find out more information about what is causing the error you look in the ___________ viewer.

More Related