1 / 1

Figure 6 - Hunter Porter and Baylee Tatum working in the

Introduction

beck
Télécharger la présentation

Figure 6 - Hunter Porter and Baylee Tatum working in the

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Introduction Dye-sensitized solar cells, or Gratzel cells, are a rather recent object of study. These cells are based on a key relationship between a semiconductor and a pigment used to attract light, similar to that of the chloroplast’s structure and the different pigments involved, consisting of one compound drawing light in and the other using the energy to release electrons into a circuit (Grätzel, 2003). The photoreceptive pigment is able to be manipulated in order to improve quality and/or price of production. One such avenue of pigment research is focused on organically derived pigments from plants. These pigments are widely available and cheap to produce. Multiple plant-based dyes are tested in solar cells, such as black rice and rosa xanthia (Hao, et. al. 2006). The viability of the pigments directly involved in photosynthesis (chlorophylls) are also tested, but the test pigments used are based on structures related to or derived from chlorophyll rather than the actual pigment (Kay & Gratzel, 1993). Past research at UCO has also tested the viability of whole chloroplasts being used as a photoreceptor (Porter, Tetreault & Bidlack, 2013). However, testing the viability of naturally complementary pairs of chlorophylls, chloroplasts and other plant pigments is a novel idea. Experiments examining the effects of anthocyanin, crude chlorophyll extract, and whole chloroplasts individually and in combination of chloroplasts/chlorophylls and the natural co-occurring anthocyanin attempt to determine the yield possible and overall yield-to-cost ratio of dye-sensitized solar cells utilizing the aforementioned photoreceptors. The Purple Heart plant (Tradescantia pallida) was chosen due to possession of accessory pigment and availability. See Figure 1. . Figure 1 - Purple Heart plant growing – Photo: By KENPEI (KENPEI's photo)[GFDL (http://www.gnu.org/copyleft/fdl.html) Further Investigations of Photovoltaic Cells using Plant Pigments Hunter Porter, Brian Tetreault, Baylee Tatum, and Jim Bidlack University of Central Oklahoma, Edmond, OK 73034 Materials and Methods Solar Cell Construction Cells construction was performed starting with two glass plates coated on one side with tin oxide. These plates were then separately treated to create anodes and cathodes. Anode construction involved spreading an even layer of titanium dioxide mixture, consisting of a ratio of 0.5 grams of titanium dioxide to 1 ml of acetic acid solution (ph 3) to 0.25 ml of Triton X, into a square shaped mold onto the conductive tin-coated side of a glass plate (this ratio seems to provide the best liquid consistency for application of anode layer). This layer was then heated to over 500 degrees Celsius in order to anneal the titanium dioxide onto the glass, finishing the anode construction. Cathode construction consisted of crosshatching the tin-coated glass plates with a pencil, leaving traces of graphite behind. The cell halves, after treatment with dye, then had a potassium iodide/iodine solution added to facilitate electron transfer and are finished by being glued together using superglue. Cell halves were glued at a slight offset in order to allow the attachment of wires to measure and utilize generated energy. Treatment Isolation and Application Chloroplasts were isolated by homogenizing 5 grams of finely diced purple heart leaves leaves in a sugar grinding solution, which is then centrifuged multiple times to pellet chloroplasts and allow removal of other cell parts (Bidlack 2012). Chloroplasts were examined under a light microscope to ensure limited damage and lack of free pigments. Anthocyanin extraction consisted of boiling Purple Heart leaves in a beaker of deionized water over a hot plate. See Figure 2. The boiling water was a quality solvent for anthocyanin and the pigment moved into solution. Chlorophyll extraction was performed crudely by mixing leaf parts vigorously with acetone until the solution was saturated with chlorophyll. All treatments were mixed with adequate amounts of sugar grinding solution to control for the extra energy that would only be present in the chloroplast solution due to its solvent of choice. See Figure 3. Treatments were applied randomly using a number sequence generator from Random.org. The conditions included chlorophyll, chloroplasts, anthocyanin, chlorophyll with anthocyanin, chloroplasts with anthocyanin, and a sugar grinding solution control. Treatments received an arbitrary number categorization in order to be randomly assigned to each arbitrarily numbered cell. The cells were then treated drop-wise with 50 microliters of treatment solution every hour for 5 hours. See Figure 4. After the final drop treatment, cells were left to dry for an hour and then final cell construction proceeds as described above. Figure 2 – Extraction of anthocyanin from Purple Heart Leaves. Figure 3 – Prepared cell treatments. Left to right: anthocyanin, chloroplasts, chlorophyll, chlorophyll mixed with sugar solution, anthocyanin, chlorophyll and sugar mixture, anthocyanin with sugar solution, and anthocyanin, chloroplast and sugar mixture. Table 1 – Cell treatments and voltages Electrical Measurement and Recording Attaching constructed cells to a voltmeter using alligator clips allowed for voltage measurement. See Figure 5. This is then added to a circuit including a rheostat in order to vary resistance. This varied resistance along with voltage readings were used for calculation of current and power output across multiple resistances, which is useful for selecting resistors. After 1 week had elapsed, cells were measured for open circuit voltages using a voltmeter. See Table 1. All cells were measured in an environmental chamber with artificial sunlight and controlled temperature. See Figure 6 Figure 5 – Voltmeter connected to cells in the environmental chamber Abstract Additional experiments are being pursued to determine the viability of using various plant pigments and parts, from the same plant, in dye-sensitized solar (photovoltaic) cells. Cells were created using glass doped with a thin film of tin oxide, one side with titanium dioxide annealed onto the plate and then treated with various plant-derived materials, serving as the anode, and another was coated with graphite, acting as the cathode. Anodes were treated drop-wise with chlorophyll, chloroplasts, and anthocyanin extracted from the leaves of Purple Heart (Tradescantia pallida) in order to impregnatethe titanium dioxide with dye. Lugol’s solution (KI/I2) was added as an electrolyte and the two cell halves were fixed together using super glue. Cells were then connected to a voltmeter and output was measured. Output of various cell treatments are currently being evaluated in a longevity study using a Pico Recorder. At this time, treatment cells are producing at least 200 millivolts (open circuit) with some cells boasting over 1,000 millivolts of output for periods of time. Figure 6 -Hunter Porter and Baylee Tatum working in the environmental chamber Results and Discussion Cells that recorded an error value on the voltmeter (produced no voltage) were excluded from analysis. ANOVA found significant difference between cell treatments (F = 2.665, p < .048). Levene's test indicated that the assumption of homogeneity of variance was violated, p < .001. After correcting for the violation of homogeneity of variance, no significant difference was found between treatments. Cell construction requires many procedures that are hard to replicate and qualitative in nature. The massive differences in standard deviation despite meticulous attempts at replication point to the need for a less human-influenced construction method. Methods explored include spray pyrolysis and electrophoretic deposition. These methods involve high cost equipment and were not feasible for such a project, but future research will require a more controllable approach. Figure 3 demonstrates one issue with the current construction recipe, as some charred tape residue can be seen on the sides of cells. This effect has not been verified, but it is suspected to hinder conductance by impeding contact of conductive material. The large standard deviation values, occurring even in the control condition, make claims about treatment quality invalid when considering this study. A repetition with better control for cell quality is necessary to accurately test the validity of dyes. Acknowledgements Funding for this project was provided by a Research, Creative, and Scholarly Activities (RCSA) grant from the Office of Research and Grants at the University of Central Oklahoma. Literature Cited Bidlack, James E. (2012). Plant Physiology Laboratory Manual Spring 2012. Grätzel, M. (2003). Dye-sensitized solar cells. Journal of Photochemistry and Photobiology C: Photochemistry Reviews, 4, 145-153. Hao, S., Wu, J., Huang, Y. & Lin, J. (2006). Natural dyes as photosensitizers for dye-sensitized solar cell; Solar Energy, 80(2), 209-214. Kay, A. & Grätzel, M. Artificial photosynthesis. 1. photosensitization of titania solar cells with chlorophyll derivatives and related natural porphyrins. Journal of Physical Chemistry, 97(23), 6272-6277. KENPEI's Photo (2007). Tradescantia pallida 'Purpurea.' [Photo]. Retrieved from upload.wikimedia.org/wikipedia/commons/d/dc/Tradescantia_pallida_Purpurea1.jpg Porter, H., Tetreault, B. & Bidlack, J. (2013). Use of chloroplasts and anthocyanin in photovoltaic cells. Poster presented at Oklahoma Research Day 2013. Figure 4 – Treated cells drying with labels. Anode side only.

More Related