1 / 15

(6) Seating Framework

(6) Seating Framework. (a) Test fit framework on duplicate master cast 1 Use duplicate master cast for initial seating 2 Inspect natural teeth and tissue side of framework for defects, Remove any imperfections 3 May need to use a disclosing medium

belljamie
Télécharger la présentation

(6) Seating Framework

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. (6) Seating Framework • (a) Test fit framework on duplicate master cast • 1 Use duplicate master cast for initial seating • 2 Inspect natural teeth and tissue side of framework for defects, Remove any imperfections • 3 May need to use a disclosing medium • 4 Framework is seated when all rests are in full contact with their rest seats • 5 Reseat frameworks on master cast (not blocked out), make adjustments as needed

  2. (7) Polishing • (b) Polishing • 1Rubber the casting aUse smooth flowing strokes bUse rubber wheels for large areas such as major connectors c Use rubber points for areas you cannot reach with a rubber wheel

  3. (7) Polishing • (b) Polishing d Use rubber points for approach arms, clasps, lingual plating, and rests e Do not rubber tissue bearing surfaces of castings or the tooth side of rests f If scratches are found at this point go back to rough finishing

  4. (7) Polishing • (c) Final polish • 1 Low-shine compound • a Soft bristle brush on high speed lathe • b Clean casting in ultrasonic cleaner • 2 Hi-shine compound • a Soft bristle brush on high speed lathe

  5. (7) Polishing • Clean casting in ultrasonic cleaner • Reseat frameworks on master cast (not blocked out), make adjustments as needed

  6. Review for Mid-term • Know functional requirements of a clasp assembly • Know survey tools and what each is used for

  7. Review for Mid-term • Purpose of RPD • 1 Restore the patient's natural appearance (esthetics) • 2 Restore function without damaging the remaining natural teeth and tissues

  8. Review for Mid-term • Chrome-cobalt alloys: • .Are more rigid than gold • .melt at higher temperatures than gold • .are harder than gold • .have a higher tensile strength than gold

  9. Review for Mid-term • A full palate is used when only weak anteriors are left in the mouth

  10. Review for Mid-term • .Where does a toothborne partial denture get support from? • .Where does a free end saddle partial denture get support from? • .What type of major connector would you use for long span maxillary distal extension case?

  11. Review for Mid-term • .From what direction does a suprabulge or infrabulge clasp approach the undercut? • .Is an I-bar clasp a suprabulge or infrabulge clasp? • .What is an akers clasp?

  12. Review for Mid-term • .What is a roach clasp? • .What is a mesiodistal clasp? • .What is a simple circlet clasp? • .What is a back action clasp?

  13. Review for Mid-term • .What is an embrasure clasp? • .What clasp is recommended for a single tooth that stands isolated between edentulous spaces of a toothborne quadrant? • .Why is a roach type clasp used where there is a free end extension?

  14. Review for Mid-term • .What type of clasp is best to use when molars have a severe anterior tilt? • .What is the gauge of the relief wax used on the saddle areas? • .What is the purpose of the finish lines?

  15. Review for Mid-term • .What is the water powder ratio for the outer investment? • .What is the purpose of the sprue during casting? • .What is the purpose of the cover on the globucast casting machine? • .What occurs during electrolytic polishing? • Purpose of RPD • 1 Restore the patient's natural appearance (esthetics) • 2 Restore function without damaging the remaining natural teeth and tissues • Chrome-cobalt alloys: • .Are more rigid than gold • .melt at higher temperatures than gold • .are harder than gold • . have a higher tensile strength than gold • A full palate is used when only

More Related