1 / 6

TeV SBD and FBI Auto Calibration Status

TeV SBD and FBI Auto Calibration Status. Tom Meyer, Dennis Nicklaus 3/4/09. Algorithm. Why it’s not working? . When this was first written we decided to watch the calculations for a while (weeks) to see if they made sense. Between Stephen and Timofei , the OAC was never enabled.

benjy
Télécharger la présentation

TeV SBD and FBI Auto Calibration Status

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TeV SBD and FBI Auto Calibration Status Tom Meyer, Dennis Nicklaus 3/4/09

  2. Algorithm

  3. Why it’s not working? • When this was first written we decided to watch the calculations for a while (weeks) to see if they made sense. • Between Stephen and Timofei, the OAC was never enabled. • After ~5 years of making good calculations, we believe it is time to enable this OAC and see what happens! • Dennis is currently trying to make this happen.

  4. Finally a note about IPMs • We have restriced the initial tune measurements to between .3 and .5 • We have restricted any position measurements to from -10 to 10 mm • We have restricted any sigmas to 0 to 10. • We have increased the voltage on spec 12 to increase the signal on the second batch.

More Related