1 / 10

Electrical Safety

Electrical Safety. Çağlar Girit Zettl Group Safety Talk 1/18/07. Understanding the Risks. Electrical hazards, while a fraction of total workplace injuries, are more likely to result in death than injuries from other causes.

bert
Télécharger la présentation

Electrical Safety

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Electrical Safety Çağlar Girit Zettl Group Safety Talk 1/18/07

  2. Understanding the Risks • Electrical hazards, while a fraction of total workplace injuries, are more likely to result in death than injuries from other causes. • Electrical accidents on the job cause an average of 13 days away from work and nearly one fatality every day. • Approximately 62 percent of an estimated 32,807 nonfatal electrical injuries occurring between 1992 and 1998 were classified as electric shock and 38 percent as electric burns. • The nonfatal workplace incidents that cause the highest number of days away from work include contact with an electrical current or a machine, tool, appliance or light fixture (38 percent), and contact with wiring, transformers or other electrical components (33 percent). • Nonfatal electrical injury occurs most often to those who work with machines or tools and around electrical wiring other than power lines. Source: “Occupational Electrical Injuries in the US, 1992–1998” published in the Journal of Safety Research

  3. Physiological Effects Burns • Internal burning of organs (body is a resistor dissipating heat) • External arcs • Shock • Muscle contraction and tetanus (“froze on the circuit”) • Heart: ventricular fibrillation • Lung: respiratory failure • Brain: ???

  4. Physiological Effects (cont’d) BODILY EFFECT DIRECT CURRENT (DC) 60 Hz AC 10 kHz AC --------------------------------------------------------------- Slight sensation Men = 1.0 mA 0.4 mA 7 mA felt at hand(s) Women = 0.6 mA 0.3 mA 5 mA --------------------------------------------------------------- Threshold of Men = 5.2 mA 1.1 mA 12 mA perception Women = 3.5 mA 0.7 mA 8 mA --------------------------------------------------------------- Painful, but Men = 62 mA 9 mA 55 mA voluntary muscle Women = 41 mA 6 mA 37 mA control maintained --------------------------------------------------------------- Painful, unable Men = 76 mA 16 mA 75 mA to let go of wires Women = 51 mA 10.5 mA 50 mA --------------------------------------------------------------- Severe pain, Men = 90 mA 23 mA 94 mA difficulty Women = 60 mA 15 mA 63 mA breathing --------------------------------------------------------------- Possible heart Men = 500 mA 100 mA fibrillation Women = 500 mA 100 mA after 3 seconds --------------------------------------------------------------- DC vs AC?

  5. Physiological Effects (cont’d) Body contact resistances • Wire touched by finger: 40,000 Ω to 1,000,000 Ω dry, 4,000 Ω to 15,000 Ω wet. • Wire held by hand: 15,000 Ω to 50,000 Ω dry, 3,000 Ω to 5,000 Ω wet. • Metal pliers held by hand: 5,000 Ω to 10,000 Ω dry, 1,000 Ω to 3,000 Ω wet. • Contact with palm of hand: 3,000 Ω to 8,000 Ω dry, 1,000 Ω to 2,000 Ω wet. • 1.5 inch metal pipe grasped by one hand: 1,000 Ω to 3,000 Ω dry, 500 Ω to 1,500 Ω wet. • 1.5 inch metal pipe grasped by two hands: 500 Ω to 1,500 kΩ dry, 250 Ω to 750 Ω wet. • Hand immersed in conductive liquid: 200 Ω to 500 Ω. • Foot immersed in conductive liquid: 100 Ω to 300 Ω. • Hand or foot contact, insulated with rubber: 20 MΩ typical. • Foot contact through leather shoe sole (dry): 100 kΩ to 500 kΩ • Foot contact through leather shoe sole (wet): 5 kΩ to 20 kΩ

  6. Protection Procedures and Equipment • Remove jewelry or any items that could improve electrical contact • Use rubber gloves and boots • De-energize circuit and ensure that it stays that way until all work is complete • Check to make sure circuit is not live • Use only one hand to avoid current path across body • Household safety items: GFCI (ground-fault circuit interrupter) and ground prong

  7. Shock Rescue Procedures • DO NOT TOUCH FROZEN PERSON or you can become frozen. • Deenergize the circuit (flip the circuit breaker) if possible. • Call for help and get first-aid supplies • Separate the person from the energy source. • Make sure you and the victim are in a safe zone - not in contact with any electrical source, away from downed or broken wires. • Never grab the person or pull the person off the current with your hands; you might become part of the circuit and become injured as well. • Use a dry wood broom, leather belt, plastic rope or something similar that is non-conductive such as wood or plastic cane with hook on the end to free the person from the energy source • Administer first aid: apply mouth-to-mouth resuscitation and/or CPR • Keep the victim lying down, warm and comfortable to maintain body heat until help arrives. Do not move the person in case of injury to neck or back. • If the victim is unconscious, put him/her on side to let fluids drain. • Make sure the victim receives professional medical attention (person shocked could have heart failure hours later) Apply burn victim first-aid.

  8. Electrical Safety Reminders • Re-route electrical cords or extension cords so they don't run across the aisle/corridor or over pipes or through doors. • Turn off and unplug equipment before removing the protective cover to clear a jam, replace a part, etc. • Don't use an electrical outlet or switch if the protective cover is ajar, cracked, or missing. • Use dry hands and stand on a dry surface when using electrical equipment. • Remove any combustible materials, such as paper and wood from the area. Be sure flammable liquids and gases are secured away from the area when the appliance is in use. • Never put conductive metal objects into energized equipment. • Remove cord from the outlet by pulling the plug instead of pulling on the cord. • Don't carry equipment by the cord - only by the handle or base. • Be sure extension cords are properly rated for the job and used only temporarily. • Use extension cords with 3-prong plugs to ensure the equipment is grounded. Never remove the grounding post from a 3-prong plug so you can put it into a 2-prong. • Don't overload extension cords, multi-outlet strips or wall outlets (15 A/120 VAC) • Take seriously any warning signs, barricades or guards posted when electrical equipment is being repaired, installed, etc.

  9. Resources • LBL Health and Safety Manual • LLNL ESH Electrical Safety Manual • All About Circuits Electrical Safety • Electrical Safety Foundation Intl • MIT EHS electrical safety • Safe Electricity website

More Related