Blades Power Generation Design, Manufacture and Supply Bespoke Automatic Load Transfer Switches

1. Blades Power Generation Design, Manufacture and Supply Bespoke Automatic Load Transfer Switches Back up power is critical for industries and high power generators are usually the norm. In such environments the automatic transfer switches play a key role in seamless transfer. United Kingdom -- Free-Press-Release.com -- Jan 03, 2017 -- Blades Power Generation is a specialist in control panel design and manufacture. In addition, they also provide new and used generation as well as guidance on selection of back up power for homes and industries. Residential power requirements are simple, usually ranging from 1 to 5 KVA and single phase line for individual homes. House owners can also opt for a portable generator or a stationary model. In this case ease of use is enhanced when the generator is interfaced to the load and the utility through an automatic changeover control panel. In domestic environments the automatic changeover mimics a UPS system with seamless transition between power generator and utility. Residential requirements are simple enough. However, in industries where loads are heavy the changeover is handled through more sophisticated automatic transfer switch. Blades Power Generation has sophisticated computer design studio to calculate all parameters in critical industrial environments and factor them into the development of automatic load transfer switch. They design and manufacture 3 and 4 pole systems with current capacities of 25 to 2500 amps. The function of the ATS is to switch the load to back up power should utility power fail and when it resumes, switch it back again to the mains. In some industries some processes may be critical requiring uninterrupted power and this is where Blades Power Generation of UK excels in design and supply of sophisticated changeover units. Majority of industries may get by with a single back up power supply in which case the configuration of an automatic switch is relatively simple but in some instances there are two standby power generators that call for more sophisticated automatic changeovers not only between two standby units but also between the utility and the standby power. Where required they can supply and installed motorized ATS too. Blades Power Generation uses industry standard components from ABB and Locato in its bespoke ATS systems thus guaranteeing high reliability. Since they are also involved in supplying diesel generators, generator connection control panels, building management systems, isolator enclosures, inverters as well as maintenance and repairs, they have the knowledge and the expertise to come up with units that perform flawlessly even in the toughest operating conditions in industries in the UK. Clients are welcome to avail of consultations and guidance on selection of a range of Page 1 of 2

2. equipments or control panel systems. Bespoke service is their forte and they can achieve the highest levels of customization to give maximum returns on investment. Blaes Power Generation UK may be contacted by phone on 44 (0)1453 799655 or by mail sales@bladespowergeneration.com www.bladespowergeneration.co.uk or on their website Contact Information: Name: Mark Blades Company: Blades Power Generation Ltd Page 2 of 2 Powered by TCPDF (www.tcpdf.org)