1 / 19

Introduction

Accuracy of GNSS Observations from Three Real-Time Networks in Maryland, USA Daniel GILLINS , Jacob HECK, Galen SCOTT, Kevin JORDAN, and Ryan HIPPENSTIEL, National Geodetic Survey, USA. Introduction.

bonniesantiago
Télécharger la présentation

Introduction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Accuracy of GNSS Observations from Three Real-Time Networks in Maryland, USADaniel GILLINS, Jacob HECK, Galen SCOTT, Kevin JORDAN, and Ryan HIPPENSTIEL, National Geodetic Survey, USA

  2. Introduction • Real-time Networks have become popular and many regional, national, and international networks are available for use • Highly accurate geodetic coordinates derived in minutes or less • Popular for surveying, engineering, navigation, machine control, precision agriculture, structural health monitoring, mobile mapping, construction

  3. Real-time Networks (RTNs) RTN Base RTN Base VRS Control Center RTN Base

  4. Problem Statement • Some desire to use RTNs for establishing geodetic control on marks • Traditional guidelines like in the USA recommend lengthy static GNSS survey campaigns (e.g., NOS-NGS 58) which require sessions from 30 min. to 5 hours • To set national standards for use of RTNs, need to ensure RTN is aligned to the national reference system • Few comparative studies have been completed on the accuracy of RTNs from different equipment manufacturers

  5. Study Area • Collected both static GPS and NRTK data on 9 bench marks (brass disks or metal rods) • All bench marks at sites suitable for GNSS observation

  6. Static GPS Campaign • Observed all 9 bench marks for two to four repeat, 24-hour static GPS sessions • Added 24-hour data for each day of survey from 8 additional CORS • Post-processed in NGS software OPUS-Projects • Survey network adjusted by least squares using NGS software ADJUST • Estimated errors in adjusted coordinates were less than 0.5 cm horizontally and 0.6 cm vertically (ellipsoid height) at 95% confidence • Used adjusted coordinates from this survey as “truth” for evaluating the RTNs

  7. RTK Equipment Topcon Hyper V Leica GS18 Trimble R10 (TopNET Live) (SmartNet) (KeyNetGPS)

  8. Network RTK Campaign, Survey Steps • Visited each bench mark 6 times (3 mornings & 3 afternoons on 3 different days) from February 21 to March 7, 2018 • Every Network RTK (NRTK) Observation = 5-minute duration (300 second), fixed measurement using both GPS+GLONASS • During each visit, repeat these steps 3 times: • (1) attach the Trimble R10 antenna to tripod, wait for fix then collect NRTK shot; • (2) remove the antenna and invert it so that it loses initialization; • (3) attach the Leica GS18 antenna, wait for fix then collect NRTK observation; • (4) remove the antenna and invert it; • (5) attach the Topcon Hyper V antenna, wait for fix, then collect NRTK observation; • (6) remove the antenna and invert it.

  9. Network RTK Campaign Survey Data • 54 NRTK observations per bench mark (54 x 9 bench marks = 486 total) • 18 NRTK observations from 3 different rovers per bench mark • From each rover, collected 9 in morning & 9 in afternoon on 3 different days • Stored each observation as a vector from a physical base station to rover • ECEF vector components plus 3x3 covariance matrix • Stored other metadata, including number of satellite vehicles used, PDOP, HDOP, and VDOP

  10. Number of Satellites, PDOP, HDOP, VDOP

  11. 1. Results: NRTK minus Adjusted Static Coordinates

  12. 1. Results: NRTK minus Adjusted Static Coordinates after Correcting Base Station Coordinates • HRMSE = 2.3 cm, VRMSE = 4.5 cm (95% confidence)

  13. 2. Results: Precision of Repeat Vectors

  14. 3. Formal Error Propagation via Survey Network Least Squares Adjustment

  15. 3. Survey Networks for Least Squares Adjustment • Constructed 5 separate survey networks for data from 3 RTNs • 2 vectors per mark • 3 vectors per mark • 4 vectors per mark • 5 vectors per mark • 6 vectors per mark

  16. 3. Results: Formal Error Propagation via Survey Network Least Squares Adjustment

  17. Conclusions • All three RTNs performed similarly in terms of accuracy. Based on 486 NRTK, 5-min. duration observations on 9 bench marks using both GPS and GLONASS: • Coordinates differed from adjusted coordinates from a static GPS survey campaign by ± 2.3 cm horizontally and ± 4.5 cm in ellipsoid height at 95% confidence • Repeat vector differences were ± 2.4 cm horizontally and ± 3.4 cm in ellipsoid height at 95% confidence • By formal error propagation, 4 repeat vectors to each mark in a survey network adjustment resulted in ellipsoid heights with estimated errors less than 2 cm (95% conf.)

  18. Questions? • Daniel.Gillins@noaa.gov

More Related