Altai Certification Training AWMS

1. Altai Super WiFi Altai Certification Training AWMS Professional Services Altai Technologies Limited Apr, 2013

2. Content • AWMS Introduction • AWMS Features Highlight • AWMS Architecture • AWMS Network Configuration • Platform Requirement • AWMS Installation • AWMS Installation • AWMS License Activations • AWMS Proxy/CCS/CCC Startup

3. Content • AWMS Operation • AWMS Proxy registration and NE finding • Topology Management (Map) • Configuration Management (NE Provisioning) • Alarm management (Filtering, Ack) • Performance Management (Report generation) • Security Management (Role setting) • Software Management (Firmware upgrade) • System backup and restoration • Scheduled Tasks

4. AWMS Introduction

5. AWMS Features • Configuration Management • Fault Management • Performance Management • Security Management • Firmware Management

6. AWMS Architecture Central Control Client (CCC) Central Control Client (CCC) Central Control Server (CCS) Configuration Management Fault Management Software Management Security Management Proxy Server Proxy Server SNMP Manager SNMP Manager B5 A8 A2 C1 B5 A8n A2 C1

7. AWMS Network Configuration

8. Platform Requirement MySQL5.0.96 MySQL5.0.96 MySQL5.0.96 MySQL5.0.96

9. Platform Requirement Altai All AP Device Altai All AP Device Altai All AP Device Altai All AP Device

10. AWMS Installation

11. AWMS Installation 1. Install the following applications before install AWMS - MySQL 5.0 (It is in awms_installer_3.2.3.6>Third Party Installers) - JDK 1.4.2 or 1.5.0 (It is in awms_installer_v3.2.3.6>Setup Files>conf>installers) - Microsoft .Net Framework 2.0 (It is in awms_installer_v3.2.3.6>Setup Files>conf>installers) 2. Install Central Control Server and Proxy Server - Install them in the same computer. - Install them in separate computers. 3. Install Central Control Client 4. Importing license file

12. AWMS Installation The Missing Required software

13. AWMS Installation (MySQL Instal)

14. AWMS Installation (MySQL Instal)

15. AWMS Installation (MySQL Instal)

16. AWMS Installation (MySQL Instal)

17. AWMS Installation (MySQL Instal)

18. AWMS Installation MySQL and JDK version should match to the required one. You can check it from below screenshot.

19. AWMS Installation

20. AWMS Installation

21. AWMS Installation

22. AWMS Installation(Configure)

23. AWMS Installation(Configure) Customize the MySQL DB User Name and Password.

24. AWMS Installation(Configure)

25. AWMS Installation(Configure)

26. AWMS Installation(Configure)

27. AWMS License activation

28. AWMS License activation

29. AWMS License activation

30. Launch the AWMS AWMS CCS and Proxy can be launched by selecting start->all programs->AWMS->Central control server And start->all programs->AWMS->proxy server respectively. “CCS is started”

31. Launch the AWMS Proxy is started

32. AWMS Client Startup AWMS default root user is: Username: root Password: ims

33. AWMS GUI Main Window

34. AWMS Operations

35. SNMP Setup In AP (A2 and C1 GUI is shown) Before operating the AWMS, make sure the SNMP Setup have been finished in AP and keep AP and AWMS client in same IP segment. Below is an example for SNMP setup in AP. Enabled SNMP Read/Write Community are SNMP access security strings Access Subnet IP/Mask: AWMS proxy domain Notification Server: AWMS proxy IP address

36. Automatic NE Discovery—SNMP V3 For B5/B5Lite/B5 CPE • SNMP v3 configuration of B5 1 Make sure the items below are same with the snmpv3 file. 2 3 4 6 5 7

37. Automatic NE Discovery—SNMP V3 For B5/B5Lite/B5 CPE Go to the AWMS installation path “Altai Technologies>AWMS>Proxy” and you can find the file name snmpv3. Open it in txt and make sure or change the configurations are same with the configuration of B5/B5Lite/B5 CPE. The parameters includes username, password, security, privacy password, privacy protocol. After changing the parameters in this file, you need to save it and restart AWMS proxy

38. AWMS Proxy Registration, NE finding Select Proxy->Add Proxy… and bring up the Proxy Registration window. Under the tab Description, configure the following properly: Proxy Name: The name of the Proxy name. Description: A brief description for the corresponding Proxy Server. (Optional) IP Address: The IP address of the Proxy Server. In-Service: Status of the Proxy Server. The Proxy Server is active when the box is checked under the CCS, otherwise it is inactive.

39. AWMS Proxy Registration, NE finding

40. AWMS Proxy Registration, NE finding After the box of “SNMP Discovery Enabled” is checked, the following can be configured under Configuration Task: Start IP: The beginning IP address of the IP address range. The range of IP addresses is used to define the managed area under the Proxy Server. End IP: The end IP address of the IP address range. Net Mask: The subnet mask of the IP address range. Read Community String: Allows AWMS to issue “Get” and “GetNext” messages through SNMP. This value should be the same as the corresponding value in NE, otherwise AWMS cannot read the configuration from the NE. By default, the value is public. Write Community String: Allows AWMS to issue “Set” messages through SNMP. This value should be same as the corresponding value in NE, otherwise AWMS cannot write the configuration from the NE. By default, the value is netman. Port: The port for the Proxy Server to communicate with NEs. By default, the value is 161.

41. Automatic NE Discovery—SNMP V2c For A8n/A8/A2N/C1/C1n • In Proxies and Maps Tree, select one proxy to discover NEs. Right click, select Proxy Registration… • Uncheck “In-Service” checkbox and click “Save” button. • Switch to the SNMP Discovery Configuration tab, fill in Start IP, End IP… • Click the “Add” button. Click “Save” button. • Put the registered proxy in service NOTE: Proxy Sever should not be In-Service before proceed to the SNMP Discovery Configuration since it cannot be modified if the corresponding Proxy Server is in service.

42. Automatic NE Discovery—SNMP V3 For B5/B5Lite/B5 CPE • In Proxies and Maps Tree, select one proxy to discover NEs. Right click, select Proxy Registration… • Uncheck “In-Service” checkbox and click “Save” button. • Switch to the SNMP Discovery Configuration tab, fill in Start IP, End IP… • Click the “Add” button. Click “Save” button. • Put the registered proxy in service NOTE: Proxy Sever should not be In-Service before proceed to the SNMP Discovery Configuration since it cannot be modified if the corresponding Proxy Server is in service.

43. AWMS Proxy Registration, NE finding After configuring the CCS and the Proxy (in service) properly, the Proxy will begin NE discovery automatically. When the Proxy(s) discovers unregistered NEs, the NEs will be shown as Unregistered NEs under the defined Proxy in the Network Topology Tree. Select the Unregistered NE, Right Click, select on “Register As Managed”. Then you can use AWMS to manage the AP.

44. NE Registration Managed: The NE you want to manage. Can be configured by AWMS. External: The NE is not part of managed network. Rogue: The unauthorized NE which may potentially be a security breach.

45. Topology Management • Adding Map • Add NE to Map • Grouping NE by Map

46. Topology Management(Map) To add a new map in AWMS Client, 1. Select Topology->Add Map… from the main menu. 2. Under the Map Basic Information, configure the following properly, then click Next>.

47. Topology Management(Map)

48. Topology Management(Map)

49. Topology Management(Map)

50. Topology Management(Map) Please click a point with known coordinate! 3 reference points should be as far as possible, better at the three corners of the map, to provide better calibration result.