1 / 4

Make a reference orbit. - Beam will be tuned to be passed to the centers of the references,

Commissioning. Make a reference orbit. - Beam will be tuned to be passed to the centers of the references, QD10, QF7, QD4A, QD2B and BDMP, with special optics, which is turned on QF7, QD4A and QD2B only. - The tuning to be centers of QD10 and QF7 are done by using steering magnets,

braden
Télécharger la présentation

Make a reference orbit. - Beam will be tuned to be passed to the centers of the references,

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Commissioning Make a reference orbit. - Beam will be tuned to be passed to the centers of the references, QD10, QF7, QD4A, QD2B and BDMP, with special optics, which is turned on QF7, QD4A and QD2B only. - The tuning to be centers of QD10 and QF7 are done by using steering magnets, and the tuning to be centers of QD4A, QB2BandBDMP should be done by changing the strength of the bending magnets for horizontally, by changing the roll of the bending magnets for vertically. - The quadrupoles are aligned with respects to the QBPM center with movers.

  2. Optics for initial commissioning Screen ?

  3. All of quadrupoles are turned on ! assuming the quadrupole setting errors of 100mm

  4. After the Orbit Correction with Movers. BBA resolutions are assumed to be 1mm.

More Related