1 / 1

We have used a syringe and normal red RTV to deposit a barrier around the bottom

We have used a syringe and normal red RTV to deposit a barrier around the bottom Of TMP006 and TMP007 to keep this area clear, of not only flux but any compound that w ill thermally short the sensor. Only one side shown in these pictures but would need

brett-vincent
Télécharger la présentation

We have used a syringe and normal red RTV to deposit a barrier around the bottom

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. We have used a syringe and normal red RTV to deposit a barrier around the bottom Of TMP006 and TMP007 to keep this area clear, of not only flux but any compound that will thermally short the sensor. Only one side shown in these pictures but would need The bead all the way around. Then you could coat the device with conformal coat but Would need to keep the top side of the die open. I’m sure the Conformal coats out there are not IR transparent .

More Related